script SCRIPT: VirtualThermostat.vb (beta) - En virtuell termostat med programfunksjon

gullfrode · 26. juli 2017

Mener moskus meldte at det ikke fungerer helt med mono, så tror det er der problemet ligger.

Tror det er triks med Winblows for HS3(eneste winblowsmaskinen hos oss)

Snurre · 26. juli 2017

10 minutter siden, gullfrode skrev:

Mener moskus meldte at det ikke fungerer helt med mono, så tror det er der problemet ligger.

Tror det er triks med Winblows for HS3(eneste winblowsmaskinen hos oss)

OK, Så dette er kun for Win setup? Stod ikke noe om det i begynnelsen, Zee 1 og 2, men det betyr vel underforstått også SEL (når jeg tenker meg om).....

Det var jo kjipt :-(

But but... it's not only only.. som en kjent person sa en gang ;-)

får vel finne meg en ve rundt dette.... men det hadde vært perfekt hvis det hadde funket..

takk for hjelpen

S

gullfrode · 26. juli 2017

Moskus har sikkert en veg rundt det, men for min del så tenkte jeg at det var kjekt å legge inn windows slik at jeg hadde en windowsmadkin hjemme, feks Aeotec har vel kun software til Eindows

Moskus · 27. juli 2017

10 timer siden, Snurre skrev:

Hei,

denne er veldig aktuell for meg. Har fulgt oppskriften over (flere ganger), men får ikke dette til å virke. Det blir ikke opprettet noe event jeg kan jobbe videre med.

Linux kan være et problem, ja. Men det kan også fungere.

Kan du kikke i loggen og si hvilken feilmelding du får? (eller hva som hender hvis du ikke får noen feilmeldinger?)

Hva gjør du?

Snurre · 27. juli 2017

13 timer siden, Moskus skrev:

Linux kan være et problem, ja. Men det kan også fungere.

Kan du kikke i loggen og si hvilken feilmelding du får? (eller hva som hender hvis du ikke får noen feilmeldinger?)

Hva gjør du?

Hei,

fikk dessverre ikke anledning til å sjekke dette i dag. Jeg sjekker i morgen. Men det skjedde ikke noen ting som helst :-). Jeg prøver igjen i morgen med friskt mot. Skal beskrive alt jeg gjør.

Takk for hjelpen

Snurre · 28. juli 2017

18 timer siden, Snurre skrev:

Hei,

fikk dessverre ikke anledning til å sjekke dette i dag. Jeg sjekker i morgen. Men det skjedde ikke noen ting som helst :-). Jeg prøver igjen i morgen med friskt mot. Skal beskrive alt jeg gjør.

Takk for hjelpen

Hei,

prøvde meg en gang til på dette. Det skjer ikke noen ting i det heletatt. I loggen under er det tydeligvis at noe er galt, men det er mange år siden jeg jobbet med programmering, så klarer ikke å lese hva som er feil sånn helt uten videre :-) bilder fra log under:

Moskus · 28. juli 2017

Hmm. Ja, det ser ikke ut som om mono 3 er så glad i det scripet. Mulig jeg klarer å gjøre noe med det, men jeg må sjekke litt på min egen Zee2 først.

Snurre · 1. september 2017

Hei,

Sleit med å få dette til å fungere med Troller SEL. MEN;

har som kjent her på forumet konvertert til PC Homeseer. Men en del barnesykdommer etc....

La inn script'et og det fungerer som bare det. Linket 3 panel ovner og det fungerer veldig bra!

Takk for at du deler dette! Er nøyaktig hva jeg har sett etter. Nå ser det ut til at Temp blir styrt på en grei måte fra en temp sensor som er nøyaktig og god.

takk,

;-)

Mvh

S

Moskus · 2. september 2017

8 timer siden, Snurre skrev:

La inn script'et og det fungerer som bare det. Linket 3 panel ovner og det fungerer veldig bra!

Supert! Takk for tilbakemeldingen!

Snurre · 2. september 2017

Hei,

Ser ut til at det ikke er helt greit å linke Fibaro wall plugs. Er nok noe med Firmware'n tenker jeg. Linket tre stykker. Ovnen som refereres til i script'et går på og forblir på, mens de to andre skrur seg av og på hele tiden. Så gav opp å linke etter å ha prøvd en god del ganger.

Har satt opp en V-Device som styrer alle tre ovnene, og det fungerer bra. Nå styres alle ovnene av script'et.

Veldig bra.

mvh

S

Christian · 3. desember 2017

Implemnenterte dette scriptet.

Satte den på Manual og 20 grader, så ble det 20 grader i rommet, da burde vel ovnen slå seg av ? Det gjorde de ikke, testet å gå inn i ini fila og endre til 20 grader på både High og Low, og satte den til Auto. Men fremdeles slår ikek ovnen seg av.

Er det noe jeg har gjort feil ?

Moskus · 4. desember 2017

19 timer siden, Christian skrev:

atte den på Manual og 20 grader, så ble det 20 grader i rommet, da burde vel ovnen slå seg av ?

Når den er over 20 grader skal den slå seg av. Og da kun når Eventet trigges (som pr default skjer hvert 5. minutt).

Og da bare hvis du har satt rett device til ovnen.

Christian · 4. desember 2017

Jeg slo på debugging.. og da så jeg at den gjorde det den skulle, men den ville ikke slå av RFXCom enheter. Hadde en Zwave som jeg satte opp og linka mot RFXCom enheten, så ble det så bra så....

Kjempetopp script, når bare enhetene mine spilte på lag.

Endret 4. desember 2017 av Christian

Moskus · 4. desember 2017

1 time siden, Christian skrev:

Jeg slo på debugging.. og da så jeg at den gjorde det den skulle, men den ville ikke slå av RFXCom enheter

Hvis du går inn på Devicen, til Status Graphics-tab'en og definerer ControlUse for hhv. "Off" og "On", så fungerer det.

JxxxIxxx · 4. desember 2017

Jeg holder på å se litt på en modifisert versjon av dette scriptet som skal jobbe sammen med en fysisk termostat men gi samme mulighetene for å sette høyt og lavt setpoint og "schedule" osv.

Men en del av det som blir gjort i scriptet er nok hakket for avansert for meg, spesielt når du lager devicene i "Setup", her var det mye jeg ikke kjente til. Jeg blir bare mer og mer imponert over hvor mye arbeid og kunnskap som som er lagt ned i dette scriptet.

Mitt konkrete spørsmål er dette: Jeg ser at du i scriptet definerer "knappene" på devicene, slik som disse:

vha funksjoner som DeviceScriptButton_AddButton osv.

Er det mulig å modifisere disse knappene i ettertid manuelt (f.eks. endre hvilket script de trigger o.l.),

eller kan dette bare gjøres via script?

Moskus · 5. desember 2017

13 timer siden, JxxxIxxx skrev:

Jeg blir bare mer og mer imponert over hvor mye arbeid og kunnskap som som er lagt ned i dette scriptet.

Takk!

... det er jo mitt mest avanserte script, og er nok ikke direkte intuitivt. Men det er bare å spørre så får du svar (men kanskje i en annen tråd...)

13 timer siden, JxxxIxxx skrev:

Er det mulig å modifisere disse knappene i ettertid manuelt (f.eks. endre hvilket script de trigger o.l.),

Du må fjerne knappen og legge den til igjen hvis du skal gjøre endringer, så vidt jeg vet.

... men hvilken nettleser har du som ikke takler unicode...?

JxxxIxxx · 5. desember 2017

1 minute ago, Moskus said:

... men hvilken nettleser har du som ikke takler unicode...?

Skjønte ikke først hva du mente, men så gikk det opp et lys ? Det er nok oppsettet på Firefox på den PCen jeg var på da jeg skrev innlegget som ikke er helt i vater. Vet jeg hadde noe problemer med dette en gang tidligere og fiklet med forskjellige innstillinger, har sikker rota det til. Har ikke tenkt så nøye over at display var litt merkelig.....

JxxxIxxx · 5. desember 2017

11 minutes ago, Moskus said:

Du må fjerne knappen og legge den til igjen hvis du skal gjøre endringer, så vidt jeg vet.

Takk for svar. jeg var vel mer ute etter om det var andre måter å lage/editere disse knappene på enn via et script, altså en mer "direkte" manuell metode for å eksperimentere, men det ser ikke sånn ut. Får se om jeg er i stand til (og har tid til) å lage et lite script for å skape og endre slike knapper, kunne vært et nyttig lite verktøy for bruk med virtuelle devicer.

jhenrikb · 29. april 2018

Hei!

Når jeg kjører scriptet første gangen via den blå knappen, skjer det ingen ting. Har sjekket over alle navn om evt skrivefeil mange ganger og oppsettet er helt identisk til ditt.

Til og med laget ny mappe "Default" som den skulle kjøre fra.

Noen som kanskje vet?

mvh

Moskus · 29. april 2018

Ta et screenshot av eventet og parametre.

jhenrikb · 29. april 2018

3 timer siden, Moskus skrev:

Ta et screenshot av eventet og parametre.

Moskus · 29. april 2018

Har du faktisk sjekket om devicene blir laget? Det kan være at de ikke er i Floor/Room utvalget du gjør...

Sier loggen noe?

jhenrikb · 30. april 2018

16 timer siden, Moskus skrev:

Har du faktisk sjekket om devicene blir laget? Det kan være at de ikke er i Floor/Room utvalget du gjør...

Sier loggen noe?

Jeg ga opp denne litt.

Fikk til en Thermostat fix via RFXCOM som Iceball laget.

Takk for hjelp

mvh

Moskus · 30. april 2018

Tror uansett du burde sjekket at du ikke har laget en haug med termostater som du ikke ser, og følgelig kan skape problemer for deg senere...

Dessuten hadde du jo hjulpet meg hvis du så en feilmelding i loggen.

jhenrikb · 30. april 2018

1 time siden, Moskus skrev:

Tror uansett du burde sjekket at du ikke har laget en haug med termostater som du ikke ser, og følgelig kan skape problemer for deg senere...

Dessuten hadde du jo hjulpet meg hvis du så en feilmelding i loggen.

Kan ikke finne noen termostater som er ekstra. Ingen ting i device list, ellers vet jeg ikke vhordan jeg skal lete etter devicer.

Ser stort sett ut som det bare var Buienradar som ikke fungerer helt for meg.

Spoiler

apr-30 16:10:29      Z-Wave   Device: Node 6 Z-Wave Volts Set to 232,94 (232,94 Volts)
apr-30 16:10:23      Device Control   Device: 1. etg Gang Varmekabler, Switch to Off (0) by/from: CAPI Control Handler
apr-30 16:10:23      Device Control   Device: 2. etg Stue Ovn TV, Switch to Off (0) by/from: CAPI Control Handler
apr-30 16:10:23      Device Control   Device: 2. etg Stue Ovn Vindu, Switch to Off (0) by/from: CAPI Control Handler
apr-30 16:10:20      Z-Wave   Device: Node 8 Z-Wave Volts Set to 232,52 (232,52 Volts)
apr-30 16:10:19      Z-Wave   Device: Node 8 Z-Wave Watts Set to 6,1 (6,1 Watts)
apr-30 16:09:40      Z-Wave   Device: Node 3 Z-Wave Luminance Set to 31 (Lux)
apr-30 16:09:39      Z-Wave   Device: 2. etg Stue Luftfuktighet, Sensor Set to 27 (%)
apr-30 16:07:28      Info   Plugin Buienradar with instance: has disconnected
apr-30 16:07:28      Plug-In   Shutting down Plug-In: Buienradar
apr-30 16:05:29      Z-Wave   Device: Node 6 Z-Wave Volts Set to 229,97 (229,97 Volts)
apr-30 16:05:23      Device Control   Device: 1. etg Gang Varmekabler, Switch to Off (0) by/from: CAPI Control Handler
apr-30 16:05:23      Device Control   Device: 2. etg Stue Ovn TV, Switch to Off (0) by/from: CAPI Control Handler
apr-30 16:05:23      Device Control   Device: 2. etg Stue Ovn Vindu, Switch to Off (0) by/from: CAPI Control Handler
apr-30 16:05:19      Z-Wave   Device: Node 8 Z-Wave Volts Set to 229,59 (229,59 Volts)
apr-30 16:05:17      Z-Wave   Device: Node 8 Z-Wave Watts Set to 6,02 (6,02 Watts)
apr-30 16:03:03      Z-Wave   Device: Node 8 Z-Wave Volts Set to 231,33 (231,33 Volts)
apr-30 16:03:02      Z-Wave   Device: Node 8 Z-Wave Watts Set to 6,1 (6,1 Watts)
apr-30 16:00:29      Z-Wave   Device: Node 6 Z-Wave Volts Set to 231,54 (231,54 Volts)
apr-30 16:00:23      Device Control   Device: 1. etg Gang Varmekabler, Switch to Off (0) by/from: CAPI Control Handler
apr-30 16:00:23      Device Control   Device: 2. etg Stue Ovn TV, Switch to Off (0) by/from: CAPI Control Handler
apr-30 16:00:23      Device Control   Device: 2. etg Stue Ovn Vindu, Switch to Off (0) by/from: CAPI Control Handler
apr-30 15:58:04      Z-Wave   Device: Node 8 Z-Wave Volts Set to 230,39 (230,39 Volts)
apr-30 15:58:02      Z-Wave   Device: Node 8 Z-Wave Watts Set to 6,2 (6,2 Watts)
apr-30 15:55:47      Buienradar   Incorrect amount of data received from Buienradar: (since 29.04.2018 22:17:16)
apr-30 15:55:29      Z-Wave   Device: Node 6 Z-Wave Volts Set to 231,22 (231,22 Volts)
apr-30 15:55:23      Device Control   Device: 1. etg Gang Varmekabler, Switch to Off (0) by/from: CAPI Control Handler
apr-30 15:55:23      Device Control   Device: 2. etg Stue Ovn TV, Switch to Off (0) by/from: CAPI Control Handler
apr-30 15:55:23      Device Control   Device: 2. etg Stue Ovn Vindu, Switch to Off (0) by/from: CAPI Control Handler
apr-30 15:53:04      Z-Wave   Device: Node 8 Z-Wave Volts Set to 230,21 (230,21 Volts)
apr-30 15:53:02      Z-Wave   Device: Node 8 Z-Wave Watts Set to 6,19 (6,19 Watts)
apr-30 15:50:29      Z-Wave   Device: Node 6 Z-Wave Volts Set to 230,15 (230,15 Volts)
apr-30 15:50:23      Device Control   Device: 1. etg Gang Varmekabler, Switch to Off (0) by/from: CAPI Control Handler
apr-30 15:50:23      Device Control   Device: 2. etg Stue Ovn TV, Switch to Off (0) by/from: CAPI Control Handler
apr-30 15:50:23      Device Control   Device: 2. etg Stue Ovn Vindu, Switch to Off (0) by/from: CAPI Control Handler
apr-30 15:49:41      Z-Wave   Device: Node 8 Z-Wave Amperes Set to 0,04 (0,04 Amperes)
apr-30 15:49:41      Z-Wave   Device: Node 8 Z-Wave Volts Set to 229,43 (229,43 Volts)
apr-30 15:49:39      Z-Wave   Device: Node 8 Z-Wave Watts Set to 6,16 (6,16 Watts)
apr-30 15:49:35      Z-Wave   Device: Node 8 Z-Wave Amperes Set to 0,05 (0,05 Amperes)
apr-30 15:49:35      Z-Wave   Device: Node 8 Z-Wave Volts Set to 229,8 (229,8 Volts)
apr-30 15:49:33      Z-Wave   Device: Node 8 Z-Wave Watts Set to 6,24 (6,24 Watts)
apr-30 15:48:53      Z-Wave   Device: Node 8 Z-Wave Volts Set to 229,58 (229,58 Volts)
apr-30 15:48:51      Z-Wave   Device: Node 8 Z-Wave Watts Set to 6,19 (6,19 Watts)
apr-30 15:48:36      Z-Wave   Device: Node 8 Z-Wave Volts Set to 229,66 (229,66 Volts)
apr-30 15:48:34      Z-Wave   Device: Node 8 Z-Wave Watts Set to 6,22 (6,22 Watts)
apr-30 15:48:10      Z-Wave   Device: Node 8 Z-Wave Amperes Set to 0,04 (0,04 Amperes)
apr-30 15:48:10      Z-Wave   Device: Node 8 Z-Wave Volts Set to 228,87 (228,87 Volts)
apr-30 15:48:08      Z-Wave   Device: Node 8 Z-Wave Watts Set to 6,25 (6,25 Watts)
apr-30 15:48:04      Z-Wave   Device: Node 8 Z-Wave Amperes Set to 0,05 (0,05 Amperes)
apr-30 15:48:04      Z-Wave   Device: Node 8 Z-Wave Volts Set to 229,81 (229,81 Volts)
apr-30 15:48:02      Z-Wave   Device: Node 8 Z-Wave Watts Set to 6,24 (6,24 Watts)
apr-30 15:47:12      Z-Wave   Device: Node 8 Z-Wave Amperes Set to 0,04 (0,04 Amperes)
apr-30 15:47:12      Z-Wave   Device: Node 8 Z-Wave Volts Set to 229,51 (229,51 Volts)
apr-30 15:47:10      Z-Wave   Device: Node 8 Z-Wave Watts Set to 6,26 (6,26 Watts)
apr-30 15:47:06      Z-Wave   Device: Node 8 Z-Wave Volts Set to 230,14 (230,14 Volts)
apr-30 15:46:53      Z-Wave   Device: Node 8 Z-Wave Volts Set to 229,89 (229,89 Volts)
apr-30 15:46:51      Z-Wave   Device: Node 8 Z-Wave Watts Set to 6,27 (6,27 Watts)
apr-30 15:46:19      Z-Wave   Device: Node 8 Z-Wave Amperes Set to 0,05 (0,05 Amperes)
apr-30 15:46:18      Z-Wave   Device: Node 8 Z-Wave Volts Set to 229,61 (229,61 Volts)
apr-30 15:46:17      Z-Wave   Device: Node 8 Z-Wave Watts Set to 6,33 (6,33 Watts)
apr-30 15:45:57      Z-Wave   Device: Node 8 Z-Wave Amperes Set to 0,04 (0,04 Amperes)
apr-30 15:45:56      Z-Wave   Device: Node 8 Z-Wave Volts Set to 230,02 (230,02 Volts)
apr-30 15:45:55      Z-Wave   Device: Node 8 Z-Wave Watts Set to 6,24 (6,24 Watts)
apr-30 15:45:49      Z-Wave   Device: Node 8 Z-Wave Amperes Set to 0,05 (0,05 Amperes)
apr-30 15:45:49      Z-Wave   Device: Node 8 Z-Wave Volts Set to 230,12 (230,12 Volts)
apr-30 15:45:47      Z-Wave   Device: Node 8 Z-Wave Watts Set to 6,21 (6,21 Watts)
apr-30 15:45:29      Z-Wave   Device: Node 6 Z-Wave Volts Set to 231,42 (231,42 Volts)
apr-30 15:45:27      Z-Wave   Device: Node 8 Z-Wave Volts Set to 230,76 (230,76 Volts)
apr-30 15:45:25      Z-Wave   Device: Node 8 Z-Wave Watts Set to 6,22 (6,22 Watts)
apr-30 15:45:23      Device Control   Device: 1. etg Gang Varmekabler, Switch to Off (0) by/from: CAPI Control Handler
apr-30 15:45:23      Device Control   Device: 2. etg Stue Ovn TV, Switch to Off (0) by/from: CAPI Control Handler
apr-30 15:45:23      Device Control   Device: 2. etg Stue Ovn Vindu, Switch to Off (0) by/from: CAPI Control Handler
apr-30 15:45:15      Z-Wave   Device: Node 8 Z-Wave Volts Set to 230,8 (230,8 Volts)
apr-30 15:44:45      Z-Wave   Device: Node 8 Z-Wave Amperes Set to 0,04 (0,04 Amperes)
apr-30 15:44:45      Z-Wave   Device: Node 8 Z-Wave Volts Set to 230,62 (230,62 Volts)
apr-30 15:44:43      Z-Wave   Device: Node 8 Z-Wave Watts Set to 6,2 (6,2 Watts)
apr-30 15:44:30      Z-Wave   Device: Node 8 Z-Wave Amperes Set to 0,05 (0,05 Amperes)
apr-30 15:44:29      Z-Wave   Device: Node 8 Z-Wave Volts Set to 230,33 (230,33 Volts)
apr-30 15:44:28      Z-Wave   Device: Node 8 Z-Wave Watts Set to 6,32 (6,32 Watts)
apr-30 15:44:14      Z-Wave   Device: Node 8 Z-Wave Amperes Set to 0,04 (0,04 Amperes)
apr-30 15:44:13      Z-Wave   Device: Node 8 Z-Wave Volts Set to 230,65 (230,65 Volts)
apr-30 15:44:12      Z-Wave   Device: Node 8 Z-Wave Watts Set to 6,3 (6,3 Watts)
apr-30 15:43:58      Z-Wave   Device: Node 8 Z-Wave Amperes Set to 0,05 (0,05 Amperes)
apr-30 15:43:57      Z-Wave   Device: Node 8 Z-Wave Volts Set to 230,88 (230,88 Volts)
apr-30 15:43:56      Z-Wave   Device: Node 8 Z-Wave Watts Set to 6,32 (6,32 Watts)
apr-30 15:43:45      Z-Wave   Device: Node 8 Z-Wave Volts Set to 229,78 (229,78 Volts)
apr-30 15:43:44      Z-Wave   Device: Node 8 Z-Wave Watts Set to 6,29 (6,29 Watts)
apr-30 15:43:31      Z-Wave   Device: Node 8 Z-Wave Amperes Set to 0,04 (0,04 Amperes)
apr-30 15:43:30      Z-Wave   Device: Node 8 Z-Wave Volts Set to 230,77 (230,77 Volts)
apr-30 15:43:29      Z-Wave   Device: Node 8 Z-Wave Watts Set to 6,22 (6,22 Watts)
apr-30 15:43:24      Z-Wave   Device: Node 8 Z-Wave Amperes Set to 0,05 (0,05 Amperes)
apr-30 15:43:23      Z-Wave   Device: Node 8 Z-Wave Volts Set to 230,94 (230,94 Volts)
apr-30 15:43:22      Z-Wave   Device: Node 8 Z-Wave Watts Set to 6,32 (6,32 Watts)
apr-30 15:43:11      Z-Wave   Device: Node 8 Z-Wave Volts Set to 230,21 (230,21 Volts)
apr-30 15:43:10      Z-Wave   Device: Node 8 Z-Wave Watts Set to 6,29 (6,29 Watts)
apr-30 15:43:03      Z-Wave   Device: Node 8 Z-Wave Amperes Set to 0,04 (0,04 Amperes)
apr-30 15:43:01      Z-Wave   Device: Node 8 Z-Wave Watts Set to 6,3 (6,3 Watts)
apr-30 15:42:51      Z-Wave   Device: Node 8 Z-Wave Amperes Set to 0,05 (0,05 Amperes)
apr-30 15:42:51      Z-Wave   Device: Node 8 Z-Wave Volts Set to 231,02 (231,02 Volts)
apr-30 15:42:49      Z-Wave   Device: Node 8 Z-Wave Watts Set to 6,33 (6,33 Watts)
apr-30 15:42:34      Z-Wave   Device: Node 8 Z-Wave Amperes Set to 0,04 (0,04 Amperes)
apr-30 15:42:33      Z-Wave   Device: Node 8 Z-Wave Volts Set to 231,21 (231,21 Volts)
apr-30 15:42:32      Z-Wave   Device: Node 8 Z-Wave Watts Set to 6,34 (6,34 Watts)
apr-30 15:42:12      Z-Wave   Device: Node 8 Z-Wave Amperes Set to 0,05 (0,05 Amperes)
apr-30 15:42:11      Z-Wave   Device: Node 8 Z-Wave Volts Set to 230,96 (230,96 Volts)
apr-30 15:42:10      Z-Wave   Device: Node 8 Z-Wave Watts Set to 6,41 (6,41 Watts)
apr-30 15:41:45      Z-Wave   Device: Node 8 Z-Wave Volts Set to 232,16 (232,16 Volts)
apr-30 15:41:43      Z-Wave   Device: Node 8 Z-Wave Watts Set to 6,33 (6,33 Watts)
apr-30 15:41:33      Z-Wave   Device: Node 6 Z-Wave Volts Set to 232,83 (232,83 Volts)
apr-30 15:41:32      Z-Wave   Device: Node 8 Z-Wave Volts Set to 233,13 (233,13 Volts)
apr-30 15:41:30      Z-Wave   Device: Node 8 Z-Wave Watts Set to 6,32 (6,32 Watts)
apr-30 15:41:26      Z-Wave   Device: 1. etg Gang Taklys, Dimmer Set to 50
apr-30 15:41:26      Device Control   Device: 1. etg Gang Varmekabler, Switch to Off (0) by/from: CAPI Control Handler
apr-30 15:41:26      Device Control   Device: 2. etg Stue Ovn Vindu, Switch to Off (0) by/from: CAPI Control Handler
apr-30 15:41:26      Device Control   Device: 2. etg Stue Ovn TV, Switch to Off (0) by/from: CAPI Control Handler
apr-30 15:41:26      Device Control   Device: 1. etg Gang Set point VARMEKABLER to 23 °C (23)
apr-30 15:41:26      Device Control   Device: 2. etg Stue Set point VINDU to 23 °C (23)
apr-30 15:41:26      Device Control   Device: 2. etg Stue Set point TV to 23 °C (23)
apr-30 15:41:26      Device Control   Device: Hus Hus Borte, Virtual to Off (0)
apr-30 15:41:26      Device Control   Device: 1. etg Gang Taklys, Dimmer to Dim 50% (50)
apr-30 15:41:26      Event   Event Trigger "Varmekontroll Varme-bryter hev"
apr-30 15:41:26      Device Control   Device: Hus Hus Varme, Virtual to On (100)
apr-30 15:41:26      Device Control   Device: Hus Hus Natt Alt, Virtual to Off (0)
apr-30 15:41:26      Device Control   Device: Hus Hus Hovedbryter, Virtuel to On (100)
apr-30 15:41:26      Device Control   Device: Hus Hus Borte, Virtual to Off (0)
apr-30 15:41:26      Event   Event Trigger "Hus Hjemme"
apr-30 15:41:26      Device Control   Device: Hus Hus Hjemme, Virtual to On (100) by/from: CAPI Control Handler
apr-30 15:41:26      Device Control   Device: 2. etg Stue Taklys spisebord, Switch to On (255) by/from: CAPI Control Handler
apr-30 15:41:20      Z-Wave   Device: Node 6 Z-Wave Volts Set to 233 (233 Volts)
apr-30 15:41:13      Z-Wave Error   Failed sending Z-Wave command to device: 2. etg Stue Taklys spisebord, Switch
apr-30 15:41:08      Z-Wave   Device: 1. etg Gang Taklys, Dimmer Set to 0
apr-30 15:41:08      Device Control   Device: 1. etg Gang Varmekabler, Switch to Off (0) by/from: CAPI Control Handler
apr-30 15:41:08      Device Control   Device: 2. etg Stue Ovn Vindu, Switch to Off (0) by/from: CAPI Control Handler
apr-30 15:41:08      Device Control   Device: 2. etg Stue Ovn TV, Switch to Off (0) by/from: CAPI Control Handler
apr-30 15:41:08      Device Control   Device: 1. etg Gang Set point VARMEKABLER to 18 °C (18)
apr-30 15:41:08      Device Control   Device: 2. etg Stue Set point VINDU to 18 °C (18)
apr-30 15:41:08      Device Control   Device: 2. etg Stue Set point TV to 18 °C (18)
apr-30 15:41:08      Event   Event Trigger "Varmekontroll Varme-bryter senk"
apr-30 15:41:08      Device Control   Device: 2. etg Stue Taklys spisebord, Switch to Off (0)
apr-30 15:41:08      Device Control   Device: Hus Hus Varme, Virtual to Off (0)
apr-30 15:41:08      Device Control   Device: 1. etg Gang Taklys, Dimmer to Off (0)
apr-30 15:41:08      Event   Event Trigger "Hus Natt alt"
apr-30 15:41:08      Device Control   Device: Hus Hus Natt Alt, Virtual to On (100) by/from: CAPI Control Handler
apr-30 15:40:55      Z-Wave Error   Failed sending Z-Wave command to device: 2. etg Stue Taklys spisebord, Switch
apr-30 15:40:50      Device Control   Device: 2. etg Stue Taklys spisebord, Switch to On (255) by/from: CAPI Control Handler
apr-30 15:40:44      Buienradar   Incorrect amount of data received from Buienradar: (since 29.04.2018 22:17:16)
apr-30 15:40:34      Z-Wave Error   Failed sending Z-Wave command to device: 2. etg Stue Taklys spisebord, Switch
apr-30 15:40:29      Z-Wave   Device: Node 6 Z-Wave Volts Set to 231,67 (231,67 Volts)
apr-30 15:40:28      Device Control   Device: 2. etg Stue Taklys spisebord, Switch to On (255) by/from: CAPI Control Handler
apr-30 15:40:28      Device Control   Device: Hus Hus Borte, Virtual to Off (0)
apr-30 15:40:28      Device Control   Device: 1. etg Gang Taklys, Dimmer to Dim 50% (50)
apr-30 15:40:28      Device Control   Device: Hus Hus Varme, Virtual to On (100)
apr-30 15:40:28      Device Control   Device: Hus Hus Natt Alt, Virtual to Off (0)
apr-30 15:40:28      Device Control   Device: Hus Hus Hovedbryter, Virtuel to On (100)
apr-30 15:40:28      Device Control   Device: Hus Hus Borte, Virtual to Off (0)
apr-30 15:40:28      Event   Event Trigger "Hus Hjemme"
apr-30 15:40:28      Device Control   Device: Hus Hus Hjemme, Virtual to On (100) by/from: CAPI Control Handler
apr-30 15:40:23      Device Control   Device: 1. etg Gang Varmekabler, Switch to Off (0) by/from: CAPI Control Handler
apr-30 15:40:23      Device Control   Device: 2. etg Stue Ovn TV, Switch to Off (0) by/from: CAPI Control Handler
apr-30 15:40:23      Device Control   Device: 2. etg Stue Ovn Vindu, Switch to Off (0) by/from: CAPI Control Handler
apr-30 15:38:43      Z-Wave   Device: Node 2 Z-Wave Home Security Set to NOTIFICATION for type Home Security, Event: No Event
apr-30 15:38:43      Z-Wave   Device: 1. etg Gang Motion, Sensor Set to Off/Closed/No Motion
apr-30 15:37:34      Z-Wave   Device: Node 2 Z-Wave Home Security Set to NOTIFICATION for type Home Security, Event: Motion Detected
apr-30 15:37:34      Z-Wave   Device: 1. etg Gang Motion, Sensor Set to On/Open/Motion
apr-30 15:37:23      Z-Wave   Device: 1. etg Gang Inngangsdør, Sensor Set to Off/Closed/No Motion
apr-30 15:37:23      Z-Wave   Device: 1. etg Gang Inngangsdør, Notification Set to NOTIFICATION for type Access Control Notification, Event: Closed
apr-30 15:36:20      Z-Wave   Device: Node 2 Z-Wave Home Security Set to NOTIFICATION for type Home Security, Event: No Event
apr-30 15:36:20      Z-Wave   Device: 1. etg Gang Motion, Sensor Set to Off/Closed/No Motion
apr-30 15:35:28      Z-Wave   Device: Node 6 Z-Wave Volts Set to 232,28 (232,28 Volts)
apr-30 15:35:23      Device Control   Device: 1. etg Gang Varmekabler, Switch to Off (0) by/from: CAPI Control Handler
apr-30 15:35:23      Device Control   Device: 2. etg Stue Ovn TV, Switch to Off (0) by/from: CAPI Control Handler
apr-30 15:35:23      Device Control   Device: 2. etg Stue Ovn Vindu, Switch to Off (0) by/from: CAPI Control Handler
apr-30 15:34:08      Z-Wave   Device: Node 2 Z-Wave Home Security Set to NOTIFICATION for type Home Security, Event: Motion Detected
apr-30 15:34:08      Z-Wave   Device: 1. etg Gang Motion, Sensor Set to On/Open/Motion
apr-30 15:33:14      Z-Wave   Device: 1. etg Gang Inngangsdør, Sensor Set to On/Open/Motion
apr-30 15:33:13      Z-Wave   Device: 1. etg Gang Inngangsdør, Notification Set to NOTIFICATION for type Access Control Notification, Event: Open
apr-30 15:30:28      Z-Wave   Device: Node 6 Z-Wave Volts Set to 231,76 (231,76 Volts)
apr-30 15:30:23      Device Control   Device: 1. etg Gang Varmekabler, Switch to Off (0) by/from: CAPI Control Handler
apr-30 15:30:23      Device Control   Device: 2. etg Stue Ovn TV, Switch to Off (0) by/from: CAPI Control Handler
apr-30 15:30:23      Device Control   Device: 2. etg Stue Ovn Vindu, Switch to Off (0) by/from: CAPI Control Handler
apr-30 15:27:48      Z-Wave   Device: Node 2 Z-Wave Luminance Set to 5 (Lux)
apr-30 15:27:46      Event   Running script statement immediately: &hs.setDeviceValueByRef(145,hs.DeviceValueEx(9),True)
apr-30 15:27:46      Event   Event Trigger "Varmekontroll Gang_temp_RFXCOM"
apr-30 15:27:46      Z-Wave   Device: 1. etg Gang Temp, Sensor Set to 23,9 (C)
apr-30 15:25:41      Buienradar   Incorrect amount of data received from Buienradar: (since 29.04.2018 22:17:16)
apr-30 15:25:28      Z-Wave   Device: Node 6 Z-Wave Volts Set to 232,38 (232,38 Volts)
apr-30 15:25:23      Device Control   Device: 1. etg Gang Varmekabler, Switch to Off (0) by/from: CAPI Control Handler
apr-30 15:25:23      Device Control   Device: 2. etg Stue Ovn TV, Switch to Off (0) by/from: CAPI Control Handler
apr-30 15:25:23      Device Control   Device: 2. etg Stue Ovn Vindu, Switch to Off (0) by/from: CAPI Control Handler
apr-30 15:20:28      Z-Wave   Device: Node 6 Z-Wave Volts Set to 232,79 (232,79 Volts)
apr-30 15:20:23      Device Control   Device: 1. etg Gang Varmekabler, Switch to Off (0) by/from: CAPI Control Handler
apr-30 15:20:23      Device Control   Device: 2. etg Stue Ovn TV, Switch to Off (0) by/from: CAPI Control Handler
apr-30 15:20:23      Device Control   Device: 2. etg Stue Ovn Vindu, Switch to Off (0) by/from: CAPI Control Handler
apr-30 15:15:28      Z-Wave   Device: Node 6 Z-Wave Volts Set to 232,03 (232,03 Volts)
apr-30 15:15:23      Device Control   Device: 1. etg Gang Varmekabler, Switch to Off (0) by/from: CAPI Control Handler
apr-30 15:15:23      Device Control   Device: 2. etg Stue Ovn TV, Switch to Off (0) by/from: CAPI Control Handler
apr-30 15:15:23      Device Control   Device: 2. etg Stue Ovn Vindu, Switch to Off (0) by/from: CAPI Control Handler
apr-30 15:10:38      Buienradar   Incorrect amount of data received from Buienradar: (since 29.04.2018 22:17:16)
apr-30 15:10:28      Z-Wave   Device: Node 6 Z-Wave Volts Set to 233,38 (233,38 Volts)
apr-30 15:10:23      Device Control   Device: 1. etg Gang Varmekabler, Switch to Off (0) by/from: CAPI Control Handler
apr-30 15:10:23      Device Control   Device: 2. etg Stue Ovn TV, Switch to Off (0) by/from: CAPI Control Handler
apr-30 15:10:23      Device Control   Device: 2. etg Stue Ovn Vindu, Switch to Off (0) by/from: CAPI Control Handler
apr-30 15:09:38      Z-Wave   Device: Node 3 Z-Wave Luminance Set to 42 (Lux)
apr-30 15:09:37      Event   Running script statement immediately: &hs.setDeviceValueByRef(141,hs.DeviceValueEx(17),True)
apr-30 15:09:37      Event   Running script statement immediately: &hs.setDeviceValueByRef(124,hs.DeviceValueEx(17),True)
apr-30 15:09:37      Event   Event Trigger "Varmekontroll Stue_temp_RFXCOM"
apr-30 15:09:37      Z-Wave   Device: 2. etg Stue Temp, Sensor Set to 23,8 (C)
apr-30 15:05:28      Z-Wave   Device: Node 6 Z-Wave Volts Set to 232,71 (232,71 Volts)
apr-30 15:05:23      Device Control   Device: 1. etg Gang Varmekabler, Switch to Off (0) by/from: CAPI Control Handler
apr-30 15:05:23      Device Control   Device: 2. etg Stue Ovn TV, Switch to Off (0) by/from: CAPI Control Handler
apr-30 15:05:22      Device Control   Device: 2. etg Stue Ovn Vindu, Switch to Off (0) by/from: CAPI Control Handler
apr-30 15:00:28      Z-Wave   Device: Node 6 Z-Wave Volts Set to 233,17 (233,17 Volts)
apr-30 15:00:22      Device Control   Device: 1. etg Gang Varmekabler, Switch to Off (0) by/from: CAPI Control Handler
apr-30 15:00:22      Device Control   Device: 2. etg Stue Ovn TV, Switch to Off (0) by/from: CAPI Control Handler
apr-30 15:00:22      Device Control   Device: 2. etg Stue Ovn Vindu, Switch to Off (0) by/from: CAPI Control Handler
apr-30 14:55:35      Buienradar   Incorrect amount of data received from Buienradar: (since 29.04.2018 22:17:16)
apr-30 14:55:28      Z-Wave   Device: Node 6 Z-Wave Volts Set to 232,87 (232,87 Volts)
apr-30 14:55:22      Device Control   Device: 1. etg Gang Varmekabler, Switch to Off (0) by/from: CAPI Control Handler
apr-30 14:55:22      Device Control   Device: 2. etg Stue Ovn TV, Switch to Off (0) by/from: CAPI Control Handler
apr-30 14:55:22      Device Control   Device: 2. etg Stue Ovn Vindu, Switch to Off (0) by/from: CAPI Control Handler
apr-30 14:50:28      Z-Wave   Device: Node 6 Z-Wave Volts Set to 231,39 (231,39 Volts)
apr-30 14:50:22      Device Control   Device: 1. etg Gang Varmekabler, Switch to Off (0) by/from: CAPI Control Handler
apr-30 14:50:22      Device Control   Device: 2. etg Stue Ovn TV, Switch to Off (0) by/from: CAPI Control Handler
apr-30 14:50:22      Device Control   Device: 2. etg Stue Ovn Vindu, Switch to Off (0) by/from: CAPI Control Handler
apr-30 14:45:28      Z-Wave   Device: Node 6 Z-Wave Volts Set to 231,63 (231,63 Volts)
apr-30 14:45:22      Device Control   Device: 1. etg Gang Varmekabler, Switch to Off (0) by/from: CAPI Control Handler
apr-30 14:45:22      Device Control   Device: 2. etg Stue Ovn TV, Switch to Off (0) by/from: CAPI Control Handler
apr-30 14:45:22      Device Control   Device: 2. etg Stue Ovn Vindu, Switch to Off (0) by/from: CAPI Control Handler
apr-30 14:40:32      Buienradar   Incorrect amount of data received from Buienradar: (since 29.04.2018 22:17:16)
apr-30 14:40:28      Z-Wave   Device: Node 6 Z-Wave Volts Set to 233,26 (233,26 Volts)
apr-30 14:40:22      Device Control   Device: 1. etg Gang Varmekabler, Switch to Off (0) by/from: CAPI Control Handler
apr-30 14:40:22      Device Control   Device: 2. etg Stue Ovn TV, Switch to Off (0) by/from: CAPI Control Handler
apr-30 14:40:22      Device Control   Device: 2. etg Stue Ovn Vindu, Switch to Off (0) by/from: CAPI Control Handler
apr-30 14:35:28      Z-Wave   Device: Node 6 Z-Wave Volts Set to 232,37 (232,37 Volts)
apr-30 14:35:22      Device Control   Device: 1. etg Gang Varmekabler, Switch to Off (0) by/from: CAPI Control Handler
apr-30 14:35:22      Device Control   Device: 2. etg Stue Ovn TV, Switch to Off (0) by/from: CAPI Control Handler
apr-30 14:35:22      Device Control   Device: 2. etg Stue Ovn Vindu, Switch to Off (0) by/from: CAPI Control Handler
apr-30 14:30:28      Z-Wave   Device: Node 6 Z-Wave Volts Set to 233,28 (233,28 Volts)
apr-30 14:30:22      Device Control   Device: 1. etg Gang Varmekabler, Switch to Off (0) by/from: CAPI Control Handler
apr-30 14:30:22      Device Control   Device: 2. etg Stue Ovn TV, Switch to Off (0) by/from: CAPI Control Handler
apr-30 14:30:22      Device Control   Device: 2. etg Stue Ovn Vindu, Switch to Off (0) by/from: CAPI Control Handler
apr-30 14:27:46      Z-Wave   Device: Node 2 Z-Wave Luminance Set to 2 (Lux)
apr-30 14:27:45      Event   Running script statement immediately: &hs.setDeviceValueByRef(145,hs.DeviceValueEx(9),True)
apr-30 14:27:45      Event   Event Trigger "Varmekontroll Gang_temp_RFXCOM"
apr-30 14:27:45      Z-Wave   Device: 1. etg Gang Temp, Sensor Set to 24 (C)
apr-30 14:25:30      Buienradar   Incorrect amount of data received from Buienradar: (since 29.04.2018 22:17:16)
apr-30 14:25:28      Z-Wave   Device: Node 6 Z-Wave Volts Set to 233,12 (233,12 Volts)
apr-30 14:25:22      Device Control   Device: 1. etg Gang Varmekabler, Switch to Off (0) by/from: CAPI Control Handler
apr-30 14:25:22      Device Control   Device: 2. etg Stue Ovn TV, Switch to Off (0) by/from: CAPI Control Handler
apr-30 14:25:22      Device Control   Device: 2. etg Stue Ovn Vindu, Switch to Off (0) by/from: CAPI Control Handler
apr-30 14:20:28      Z-Wave   Device: Node 6 Z-Wave Volts Set to 233,87 (233,87 Volts)
apr-30 14:20:22      Device Control   Device: 1. etg Gang Varmekabler, Switch to Off (0) by/from: CAPI Control Handler
apr-30 14:20:22      Device Control   Device: 2. etg Stue Ovn TV, Switch to Off (0) by/from: CAPI Control Handler
apr-30 14:20:22      Device Control   Device: 2. etg Stue Ovn Vindu, Switch to Off (0) by/from: CAPI Control Handler
apr-30 14:18:50      Z-Wave   Device: Node 2 Z-Wave Home Security Set to NOTIFICATION for type Home Security, Event: No Event
apr-30 14:18:50      Z-Wave   Device: 1. etg Gang Motion, Sensor Set to Off/Closed/No Motion
apr-30 14:18:41      Z-Wave   Device: 1. etg Gang Inngangsdør, Sensor Set to Off/Closed/No Motion
apr-30 14:18:41      Z-Wave   Device: 1. etg Gang Inngangsdør, Notification Set to NOTIFICATION for type Access Control Notification, Event: Closed
apr-30 14:18:36      Z-Wave   Device: 1. etg Gang Inngangsdør, Sensor Set to On/Open/Motion
apr-30 14:18:36      Z-Wave   Device: 1. etg Gang Inngangsdør, Notification Set to NOTIFICATION for type Access Control Notification, Event: Open
apr-30 14:17:41      Z-Wave   Device: Node 2 Z-Wave Home Security Set to NOTIFICATION for type Home Security, Event: Motion Detected
apr-30 14:17:41      Z-Wave   Device: 1. etg Gang Motion, Sensor Set to On/Open/Motion
apr-30 14:15:28      Z-Wave   Device: Node 6 Z-Wave Volts Set to 233,02 (233,02 Volts)
apr-30 14:15:22      Device Control   Device: 1. etg Gang Varmekabler, Switch to Off (0) by/from: CAPI Control Handler
apr-30 14:15:22      Device Control   Device: 2. etg Stue Ovn TV, Switch to Off (0) by/from: CAPI Control Handler
apr-30 14:15:22      Device Control   Device: 2. etg Stue Ovn Vindu, Switch to Off (0) by/from: CAPI Control Handler
apr-30 14:11:14      Z-Wave   Device: Node 2 Z-Wave Home Security Set to NOTIFICATION for type Home Security, Event: No Event
apr-30 14:11:14      Z-Wave   Device: 1. etg Gang Motion, Sensor Set to Off/Closed/No Motion
apr-30 14:10:28      Z-Wave   Device: Node 6 Z-Wave Volts Set to 234,35 (234,35 Volts)
apr-30 14:10:27      Buienradar   Incorrect amount of data received from Buienradar: (since 29.04.2018 22:17:16)
apr-30 14:10:22      Device Control   Device: 1. etg Gang Varmekabler, Switch to Off (0) by/from: CAPI Control Handler
apr-30 14:10:22      Device Control   Device: 2. etg Stue Ovn TV, Switch to Off (0) by/from: CAPI Control Handler
apr-30 14:10:22      Device Control   Device: 2. etg Stue Ovn Vindu, Switch to Off (0) by/from: CAPI Control Handler
apr-30 14:09:37      Z-Wave   Device: Node 3 Z-Wave Luminance Set to 97 (Lux)
apr-30 14:09:35      Event   Running script statement immediately: &hs.setDeviceValueByRef(141,hs.DeviceValueEx(17),True)
apr-30 14:09:35      Event   Running script statement immediately: &hs.setDeviceValueByRef(124,hs.DeviceValueEx(17),True)
apr-30 14:09:35      Event   Event Trigger "Varmekontroll Stue_temp_RFXCOM"
apr-30 14:09:35      Z-Wave   Device: 2. etg Stue Temp, Sensor Set to 23,9 (C)
apr-30 14:09:19      Z-Wave   Device: Node 2 Z-Wave Home Security Set to NOTIFICATION for type Home Security, Event: Motion Detected
apr-30 14:09:19      Z-Wave   Device: 1. etg Gang Motion, Sensor Set to On/Open/Motion
apr-30 14:05:28      Z-Wave   Device: Node 6 Z-Wave Volts Set to 233,39 (233,39 Volts)
apr-30 14:05:22      Device Control   Device: 1. etg Gang Varmekabler, Switch to Off (0) by/from: CAPI Control Handler
apr-30 14:05:22      Device Control   Device: 2. etg Stue Ovn TV, Switch to Off (0) by/from: CAPI Control Handler
apr-30 14:05:22      Device Control   Device: 2. etg Stue Ovn Vindu, Switch to Off (0) by/from: CAPI Control Handler
apr-30 14:05:05      Z-Wave   Device: Node 8 Z-Wave Volts Set to 233,1 (233,1 Volts)
apr-30 14:05:04      Z-Wave   Device: Node 8 Z-Wave Watts Set to 6,01 (6,01 Watts)
apr-30 14:00:28      Z-Wave   Device: Node 6 Z-Wave Volts Set to 233,77 (233,77 Volts)
apr-30 14:00:22      Device Control   Device: 1. etg Gang Varmekabler, Switch to Off (0) by/from: CAPI Control Handler
apr-30 14:00:22      Device Control   Device: 2. etg Stue Ovn TV, Switch to Off (0) by/from: CAPI Control Handler
apr-30 14:00:22      Device Control   Device: 2. etg Stue Ovn Vindu, Switch to Off (0) by/from: CAPI Control Handler
apr-30 14:00:04      Z-Wave   Device: Node 8 Z-Wave Volts Set to 233,36 (233,36 Volts)
apr-30 14:00:02      Z-Wave   Device: Node 8 Z-Wave Watts Set to 6,12 (6,12 Watts)
apr-30 13:55:28      Z-Wave   Device: Node 6 Z-Wave Volts Set to 233,92 (233,92 Volts)
apr-30 13:55:24      Buienradar   Incorrect amount of data received from Buienradar: (since 29.04.2018 22:17:16)
apr-30 13:55:22      Device Control   Device: 1. etg Gang Varmekabler, Switch to Off (0) by/from: CAPI Control Handler
apr-30 13:55:22      Device Control   Device: 2. etg Stue Ovn TV, Switch to Off (0) by/from: CAPI Control Handler
apr-30 13:55:22      Device Control   Device: 2. etg Stue Ovn Vindu, Switch to Off (0) by/from: CAPI Control Handler
apr-30 13:55:04      Z-Wave   Device: Node 8 Z-Wave Volts Set to 234,04 (234,04 Volts)
apr-30 13:55:03      Z-Wave   Device: Node 8 Z-Wave Watts Set to 6,05 (6,05 Watts)
apr-30 13:50:28      Z-Wave   Device: Node 6 Z-Wave Volts Set to 232,86 (232,86 Volts)
apr-30 13:50:22      Device Control   Device: 1. etg Gang Varmekabler, Switch to Off (0) by/from: CAPI Control Handler
apr-30 13:50:22      Device Control   Device: 2. etg Stue Ovn TV, Switch to Off (0) by/from: CAPI Control Handler
apr-30 13:50:22      Device Control   Device: 2. etg Stue Ovn Vindu, Switch to Off (0) by/from: CAPI Control Handler
apr-30 13:50:04      Z-Wave   Device: Node 8 Z-Wave Volts Set to 232,69 (232,69 Volts)
apr-30 13:50:02      Z-Wave   Device: Node 8 Z-Wave Watts Set to 6,07 (6,07 Watts)
apr-30 13:45:28      Z-Wave   Device: Node 6 Z-Wave Volts Set to 233,3 (233,3 Volts)
apr-30 13:45:22      Device Control   Device: 1. etg Gang Varmekabler, Switch to Off (0) by/from: CAPI Control Handler
apr-30 13:45:22      Device Control   Device: 2. etg Stue Ovn TV, Switch to Off (0) by/from: CAPI Control Handler
apr-30 13:45:22      Device Control   Device: 2. etg Stue Ovn Vindu, Switch to Off (0) by/from: CAPI Control Handler
apr-30 13:45:03      Z-Wave   Device: Node 8 Z-Wave Volts Set to 231,78 (231,78 Volts)
apr-30 13:45:02      Z-Wave   Device: Node 8 Z-Wave Watts Set to 6,09 (6,09 Watts)
apr-30 13:40:28      Z-Wave   Device: Node 6 Z-Wave Volts Set to 232,62 (232,62 Volts)
apr-30 13:40:22      Device Control   Device: 1. etg Gang Varmekabler, Switch to Off (0) by/from: CAPI Control Handler
apr-30 13:40:22      Device Control   Device: 2. etg Stue Ovn TV, Switch to Off (0) by/from: CAPI Control Handler
apr-30 13:40:22      Device Control   Device: 2. etg Stue Ovn Vindu, Switch to Off (0) by/from: CAPI Control Handler
apr-30 13:40:21      Buienradar   Incorrect amount of data received from Buienradar: (since 29.04.2018 22:17:16)
apr-30 13:40:03      Z-Wave   Device: Node 8 Z-Wave Volts Set to 231,92 (231,92 Volts)
apr-30 13:40:02      Z-Wave   Device: Node 8 Z-Wave Watts Set to 6,01 (6,01 Watts)
apr-30 13:35:28      Z-Wave   Device: Node 6 Z-Wave Volts Set to 233,6 (233,6 Volts)
apr-30 13:35:22      Device Control   Device: 1. etg Gang Varmekabler, Switch to Off (0) by/from: CAPI Control Handler
apr-30 13:35:22      Device Control   Device: 2. etg Stue Ovn TV, Switch to Off (0) by/from: CAPI Control Handler
apr-30 13:35:22      Device Control   Device: 2. etg Stue Ovn Vindu, Switch to Off (0) by/from: CAPI Control Handler
apr-30 13:35:01      Z-Wave   Device: Node 8 Z-Wave Volts Set to 233,19 (233,19 Volts)
apr-30 13:35:00      Z-Wave   Device: Node 8 Z-Wave Watts Set to 6,06 (6,06 Watts)
apr-30 13:30:28      Z-Wave   Device: Node 6 Z-Wave Volts Set to 232,88 (232,88 Volts)
apr-30 13:30:22      Device Control   Device: 1. etg Gang Varmekabler, Switch to Off (0) by/from: CAPI Control Handler
apr-30 13:30:22      Device Control   Device: 2. etg Stue Ovn TV, Switch to Off (0) by/from: CAPI Control Handler
apr-30 13:30:22      Device Control   Device: 2. etg Stue Ovn Vindu, Switch to Off (0) by/from: CAPI Control Handler
apr-30 13:30:02      Z-Wave   Device: Node 8 Z-Wave Amperes Set to 0,04 (0,04 Amperes)
apr-30 13:30:01      Z-Wave   Device: Node 8 Z-Wave Volts Set to 232,31 (232,31 Volts)
apr-30 13:30:00      Z-Wave   Device: Node 8 Z-Wave Watts Set to 6,01 (6,01 Watts)
apr-30 13:29:56      Z-Wave   Device: Node 8 Z-Wave Amperes Set to 0,05 (0,05 Amperes)
apr-30 13:29:55      Z-Wave   Device: Node 8 Z-Wave Volts Set to 232,29 (232,29 Volts)
apr-30 13:29:54      Z-Wave   Device: Node 8 Z-Wave Watts Set to 6,04 (6,04 Watts)
apr-30 13:29:17      Z-Wave   Device: Node 8 Z-Wave Volts Set to 232,4 (232,4 Volts)
apr-30 13:29:16      Z-Wave   Device: Node 8 Z-Wave Watts Set to 6,12 (6,12 Watts)
apr-30 13:27:45      Z-Wave   Device: Node 2 Z-Wave Luminance Set to 5 (Lux)
apr-30 13:27:44      Z-Wave   Device: 1. etg Gang Luftfuktighet, Sensor Set to 26 (%)
apr-30 13:27:43      Event   Running script statement immediately: &hs.setDeviceValueByRef(145,hs.DeviceValueEx(9),True)
apr-30 13:27:43      Event   Event Trigger "Varmekontroll Gang_temp_RFXCOM"
apr-30 13:27:43      Z-Wave   Device: 1. etg Gang Temp, Sensor Set to 23,9 (C)
apr-30 13:25:28      Z-Wave   Device: Node 6 Z-Wave Volts Set to 233,19 (233,19 Volts)
apr-30 13:25:22      Device Control   Device: 1. etg Gang Varmekabler, Switch to Off (0) by/from: CAPI Control Handler
apr-30 13:25:22      Device Control   Device: 2. etg Stue Ovn TV, Switch to Off (0) by/from: CAPI Control Handler
apr-30 13:25:22      Device Control   Device: 2. etg Stue Ovn Vindu, Switch to Off (0) by/from: CAPI Control Handler
apr-30 13:25:19      Buienradar   Incorrect amount of data received from Buienradar: (since 29.04.2018 22:17:16)
apr-30 13:24:15      Z-Wave   Device: Node 8 Z-Wave Volts Set to 232,92 (232,92 Volts)
apr-30 13:24:14      Z-Wave   Device: Node 8 Z-Wave Watts Set to 6,16 (6,16 Watts)
apr-30 13:20:29      Z-Wave   Device: Node 6 Z-Wave Volts Set to 231,9 (231,9 Volts)
apr-30 13:20:22      Device Control   Device: 1. etg Gang Varmekabler, Switch to Off (0) by/from: CAPI Control Handler
apr-30 13:20:22      Device Control   Device: 2. etg Stue Ovn TV, Switch to Off (0) by/from: CAPI Control Handler
apr-30 13:20:22      Device Control   Device: 2. etg Stue Ovn Vindu, Switch to Off (0) by/from: CAPI Control Handler
apr-30 13:19:14      Z-Wave   Device: Node 8 Z-Wave Volts Set to 231,68 (231,68 Volts)
apr-30 13:19:13      Z-Wave   Device: Node 8 Z-Wave Watts Set to 6,11 (6,11 Watts)
apr-30 13:15:29      Z-Wave   Device: Node 6 Z-Wave Volts Set to 233,31 (233,31 Volts)
apr-30 13:15:22      Device Control   Device: 1. etg Gang Varmekabler, Switch to Off (0) by/from: CAPI Control Handler
apr-30 13:15:22      Device Control   Device: 2. etg Stue Ovn TV, Switch to Off (0) by/from: CAPI Control Handler
apr-30 13:15:22      Device Control   Device: 2. etg Stue Ovn Vindu, Switch to Off (0) by/from: CAPI Control Handler
apr-30 13:15:00      Log Info   The log database is currently 2,17MB in size.
apr-30 13:14:15      Z-Wave   Device: Node 8 Z-Wave Amperes Set to 0,04 (0,04 Amperes)
apr-30 13:14:14      Z-Wave   Device: Node 8 Z-Wave Volts Set to 233,67 (233,67 Volts)
apr-30 13:14:13      Z-Wave   Device: Node 8 Z-Wave Watts Set to 6,14 (6,14 Watts)
apr-30 13:14:08      Z-Wave   Device: Node 8 Z-Wave Amperes Set to 0,05 (0,05 Amperes)
apr-30 13:14:07      Z-Wave   Device: Node 8 Z-Wave Volts Set to 232,78 (232,78 Volts)
apr-30 13:14:06      Z-Wave   Device: Node 8 Z-Wave Watts Set to 6,25 (6,25 Watts)
apr-30 13:11:23      Z-Wave   Device: Node 8 Z-Wave Volts Set to 232,21 (232,21 Volts)
apr-30 13:11:22      Z-Wave   Device: Node 8 Z-Wave Watts Set to 6,12 (6,12 Watts)
apr-30 13:10:29      Z-Wave   Device: Node 6 Z-Wave Volts Set to 233,38 (233,38 Volts)
apr-30 13:10:22      Device Control   Device: 1. etg Gang Varmekabler, Switch to Off (0) by/from: CAPI Control Handler
apr-30 13:10:22      Device Control   Device: 2. etg Stue Ovn TV, Switch to Off (0) by/from: CAPI Control Handler
apr-30 13:10:22      Device Control   Device: 2. etg Stue Ovn Vindu, Switch to Off (0) by/from: CAPI Control Handler
apr-30 13:10:16      Buienradar   Incorrect amount of data received from Buienradar: (since 29.04.2018 22:17:16)
apr-30 13:09:35      Z-Wave   Device: Node 3 Z-Wave Luminance Set to 95 (Lux)
apr-30 13:09:34      Event   Running script statement immediately: &hs.setDeviceValueByRef(141,hs.DeviceValueEx(17),True)
apr-30 13:09:34      Event   Running script statement immediately: &hs.setDeviceValueByRef(124,hs.DeviceValueEx(17),True)
apr-30 13:09:34      Event   Event Trigger "Varmekontroll Stue_temp_RFXCOM"
apr-30 13:09:34      Z-Wave   Device: 2. etg Stue Temp, Sensor Set to 23,8 (C)
apr-30 13:06:22      Z-Wave   Device: Node 8 Z-Wave Volts Set to 233,35 (233,35 Volts)
apr-30 13:06:21      Z-Wave   Device: Node 8 Z-Wave Watts Set to 6,14 (6,14 Watts)
apr-30 13:06:00      Energy DB Info   All energy database compacting routines completed.
apr-30 13:06:00      Energy DB   Database is 0,1689453 MB in size. No further compaction needed.
apr-30 13:06:00      Energy DB Info   Compacting remaining data...
apr-30 13:06:00      Energy DB Info   Compacting data older than 4 months...
apr-30 13:06:00      Energy DB Info   Compacting data older than 1 year...
apr-30 13:06:00      Energy DB Info   Compacting data older than 3 years...
apr-30 13:06:00      Energy DB Info   Compacting data older than 5 years...
apr-30 13:06:00      Energy DB Info   Compacting data older than 10 years...
apr-30 13:06:00      Energy DB Info   Energy database compaction initiated.
apr-30 13:05:29      Z-Wave   Device: Node 6 Z-Wave Volts Set to 234,06 (234,06 Volts)
apr-30 13:05:22      Device Control   Device: 1. etg Gang Varmekabler, Switch to Off (0) by/from: CAPI Control Handler
apr-30 13:05:22      Device Control   Device: 2. etg Stue Ovn TV, Switch to Off (0) by/from: CAPI Control Handler
apr-30 13:05:22      Device Control   Device: 2. etg Stue Ovn Vindu, Switch to Off (0) by/from: CAPI Control Handler
apr-30 13:04:15      Z-Wave   Device: 1. etg Gang Taklys, Dimmer Set to 50
apr-30 13:04:15      Device Control   Device: Hus Hus Borte, Virtual to Off (0)
apr-30 13:04:15      Device Control   Device: 1. etg Gang Taklys, Dimmer to Dim 50% (50)
apr-30 13:04:15      Device Control   Device: Hus Hus Varme, Virtual to On (100)
apr-30 13:04:15      Device Control   Device: Hus Hus Natt Alt, Virtual to Off (0)
apr-30 13:04:15      Device Control   Device: Hus Hus Hovedbryter, Virtuel to On (100)
apr-30 13:04:15      Device Control   Device: Hus Hus Borte, Virtual to Off (0)
apr-30 13:04:15      Event   Event Trigger "Hus Hjemme"
apr-30 13:04:15      Device Control   Device: Hus Hus Hjemme, Virtual to On (100) by/from: CAPI Control Handler
apr-30 13:03:45      Z-Wave   Device: 1. etg Gang Taklys, Dimmer Set to 56
apr-30 13:03:45      Device Control   Device: 1. etg Gang Taklys, Dimmer to Dim 56% (56) by/from: CAPI Control Handler
apr-30 13:03:42      Z-Wave   Device: 1. etg Gang Taklys, Dimmer Set to 28
apr-30 13:03:42      Device Control   Device: 1. etg Gang Taklys, Dimmer to Dim 28% (28) by/from: CAPI Control Handler
apr-30 13:03:26      Z-Wave   Device: 1. etg Gang Taklys, Dimmer Set to 99
apr-30 13:03:26      Device Control   Device: 1. etg Gang Taklys, Dimmer to On (99) by/from: CAPI Control Handler
apr-30 13:01:22      Z-Wave   Device: Node 8 Z-Wave Volts Set to 232,14 (232,14 Volts)
apr-30 13:01:21      Z-Wave   Device: Node 8 Z-Wave Watts Set to 6,17 (6,17 Watts)
apr-30 13:00:29      Z-Wave   Device: Node 6 Z-Wave Volts Set to 234,43 (234,43 Volts)
apr-30 13:00:22      Device Control   Device: 1. etg Gang Varmekabler, Switch to Off (0) by/from: CAPI Control Handler
apr-30 13:00:22      Device Control   Device: 2. etg Stue Ovn TV, Switch to Off (0) by/from: CAPI Control Handler
apr-30 13:00:22      Device Control   Device: 2. etg Stue Ovn Vindu, Switch to Off (0) by/from: CAPI Control Handler
apr-30 12:56:58      Z-Wave   Device: Node 8 Z-Wave Volts Set to 234,22 (234,22 Volts)
apr-30 12:56:58      Z-Wave   Device: Node 6 Z-Wave Volts Set to 234,47 (234,47 Volts)
apr-30 12:56:57      Z-Wave   Device: Node 8 Z-Wave Watts Set to 6,25 (6,25 Watts)
apr-30 12:56:56      Z-Wave   Device: Node 8 Z-Wave Amperes Set to 0,04 (0,04 Amperes)
apr-30 12:56:55      Z-Wave   Device: Node 8 Z-Wave Volts Set to 234,32 (234,32 Volts)
apr-30 12:56:54      Z-Wave   Device: Node 8 Z-Wave Watts Set to 6,34 (6,34 Watts)
apr-30 12:56:51      Z-Wave   Device: 2. etg Stue Taklys spisebord, Switch Set to 255
apr-30 12:56:50      Z-Wave   Device: 1. etg Gang Taklys, Dimmer Set to 50
apr-30 12:56:50      Device Control   Device: 2. etg Stue Taklys spisebord, Switch to On (255) by/from: CAPI Control Handler
apr-30 12:56:50      Device Control   Device: 1. etg Gang Varmekabler, Switch to Off (0) by/from: CAPI Control Handler
apr-30 12:56:50      Device Control   Device: 2. etg Stue Ovn Vindu, Switch to Off (0) by/from: CAPI Control Handler
apr-30 12:56:50      Device Control   Device: 2. etg Stue Ovn TV, Switch to Off (0) by/from: CAPI Control Handler
apr-30 12:56:50      Device Control   Device: 1. etg Gang Set point VARMEKABLER to 23 °C (23)
apr-30 12:56:50      Device Control   Device: 2. etg Stue Set point VINDU to 23 °C (23)
apr-30 12:56:50      Device Control   Device: 2. etg Stue Set point TV to 23 °C (23)
apr-30 12:56:50      Device Control   Device: Hus Hus Borte, Virtual to Off (0)
apr-30 12:56:50      Device Control   Device: 1. etg Gang Taklys, Dimmer to Dim 50% (50)
apr-30 12:56:50      Event   Event Trigger "Varmekontroll Varme-bryter hev"
apr-30 12:56:50      Device Control   Device: Hus Hus Varme, Virtual to On (100)
apr-30 12:56:50      Device Control   Device: Hus Hus Natt Alt, Virtual to Off (0)
apr-30 12:56:50      Device Control   Device: Hus Hus Hovedbryter, Virtuel to On (100)
apr-30 12:56:50      Device Control   Device: Hus Hus Borte, Virtual to Off (0)
apr-30 12:56:50      Event   Event Trigger "Hus Hjemme"
apr-30 12:56:50      Device Control   Device: Hus Hus Hjemme, Virtual to On (100) by/from: CAPI Control Handler
apr-30 12:55:29      Z-Wave   Device: Node 6 Z-Wave Volts Set to 233 (233 Volts)
apr-30 12:55:22      Device Control   Device: 1. etg Gang Varmekabler, Switch to Off (0) by/from: CAPI Control Handler
apr-30 12:55:22      Device Control   Device: 2. etg Stue Ovn TV, Switch to Off (0) by/from: CAPI Control Handler
apr-30 12:55:22      Device Control   Device: 2. etg Stue Ovn Vindu, Switch to Off (0) by/from: CAPI Control Handler
apr-30 12:55:11      Buienradar   Incorrect amount of data received from Buienradar: (since 29.04.2018 22:17:16)
apr-30 12:54:22      Z-Wave   Device: Node 8 Z-Wave Volts Set to 234,89 (234,89 Volts)
apr-30 12:50:29      Z-Wave   Device: Node 6 Z-Wave Volts Set to 233,13 (233,13 Volts)
apr-30 12:50:22      Device Control   Device: 1. etg Gang Varmekabler, Switch to Off (0) by/from: CAPI Control Handler
apr-30 12:50:22      Device Control   Device: 2. etg Stue Ovn TV, Switch to Off (0) by/from: CAPI Control Handler
apr-30 12:50:22      Device Control   Device: 2. etg Stue Ovn Vindu, Switch to Off (0) by/from: CAPI Control Handler
apr-30 12:49:22      Z-Wave   Device: Node 8 Z-Wave Volts Set to 233,58 (233,58 Volts)
apr-30 12:45:29      Z-Wave   Device: Node 6 Z-Wave Volts Set to 234,06 (234,06 Volts)
apr-30 12:45:22      Device Control   Device: 1. etg Gang Varmekabler, Switch to Off (0) by/from: CAPI Control Handler
apr-30 12:45:22      Device Control   Device: 2. etg Stue Ovn TV, Switch to Off (0) by/from: CAPI Control Handler
apr-30 12:45:22      Device Control   Device: 2. etg Stue Ovn Vindu, Switch to Off (0) by/from: CAPI Control Handler
apr-30 12:44:22      Z-Wave   Device: Node 8 Z-Wave Volts Set to 232,59 (232,59 Volts)
apr-30 12:40:29      Z-Wave   Device: Node 6 Z-Wave Volts Set to 233,87 (233,87 Volts)
apr-30 12:40:22      Device Control   Device: 1. etg Gang Varmekabler, Switch to Off (0) by/from: CAPI Control Handler
apr-30 12:40:22      Device Control   Device: 2. etg Stue Ovn TV, Switch to Off (0) by/from: CAPI Control Handler
apr-30 12:40:22      Device Control   Device: 2. etg Stue Ovn Vindu, Switch to Off (0) by/from: CAPI Control Handler
apr-30 12:40:00      Buienradar   Incorrect amount of data received from Buienradar: (since 29.04.2018 22:17:16)
apr-30 12:39:22      Z-Wave   Device: Node 8 Z-Wave Volts Set to 232,98 (232,98 Volts)
apr-30 12:35:29      Z-Wave   Device: Node 6 Z-Wave Volts Set to 233,69 (233,69 Volts)
apr-30 12:35:22      Device Control   Device: 1. etg Gang Varmekabler, Switch to Off (0) by/from: CAPI Control Handler
apr-30 12:35:22      Device Control   Device: 2. etg Stue Ovn TV, Switch to Off (0) by/from: CAPI Control Handler
apr-30 12:35:22      Device Control   Device: 2. etg Stue Ovn Vindu, Switch to Off (0) by/from: CAPI Control Handler
apr-30 12:34:22      Z-Wave   Device: Node 8 Z-Wave Volts Set to 233,89 (233,89 Volts)
apr-30 12:30:29      Z-Wave   Device: Node 6 Z-Wave Volts Set to 232,51 (232,51 Volts)
apr-30 12:30:22      Device Control   Device: 1. etg Gang Varmekabler, Switch to Off (0) by/from: CAPI Control Handler
apr-30 12:30:22      Device Control   Device: 2. etg Stue Ovn TV, Switch to Off (0) by/from: CAPI Control Handler
apr-30 12:30:22      Device Control   Device: 2. etg Stue Ovn Vindu, Switch to Off (0) by/from: CAPI Control Handler
apr-30 12:29:22      Z-Wave   Device: Node 8 Z-Wave Volts Set to 233,14 (233,14 Volts)
apr-30 12:25:29      Z-Wave   Device: Node 6 Z-Wave Volts Set to 233,17 (233,17 Volts)
apr-30 12:25:26      Z-Wave   Device: Node 6 Z-Wave Volts Set to 233,42 (233,42 Volts)
apr-30 12:25:22      Device Control   Device: 1. etg Gang Varmekabler, Switch to Off (0) by/from: CAPI Control Handler
apr-30 12:25:21      Device Control   Device: 2. etg Stue Ovn TV, Switch to Off (0) by/from: CAPI Control Handler
apr-30 12:25:21      Device Control   Device: 2. etg Stue Ovn Vindu, Switch to Off (0) by/from: CAPI Control Handler
apr-30 12:24:58      Buienradar   Incorrect amount of data received from Buienradar: (since 29.04.2018 22:17:16)
apr-30 12:24:22      Z-Wave   Device: Node 8 Z-Wave Volts Set to 234,09 (234,09 Volts)
apr-30 12:20:26      Z-Wave   Device: Node 6 Z-Wave Volts Set to 233,59 (233,59 Volts)
apr-30 12:20:21      Device Control   Device: 1. etg Gang Varmekabler, Switch to Off (0) by/from: CAPI Control Handler
apr-30 12:20:21      Device Control   Device: 2. etg Stue Ovn TV, Switch to Off (0) by/from: CAPI Control Handler
apr-30 12:20:21      Device Control   Device: 2. etg Stue Ovn Vindu, Switch to Off (0) by/from: CAPI Control Handler
apr-30 12:19:21      Z-Wave   Device: Node 8 Z-Wave Volts Set to 233,14 (233,14 Volts)
apr-30 12:15:26      Z-Wave   Device: Node 6 Z-Wave Volts Set to 231,55 (231,55 Volts)
apr-30 12:15:21      Device Control   Device: 1. etg Gang Varmekabler, Switch to Off (0) by/from: CAPI Control Handler
apr-30 12:15:21      Device Control   Device: 2. etg Stue Ovn TV, Switch to Off (0) by/from: CAPI Control Handler
apr-30 12:15:21      Device Control   Device: 2. etg Stue Ovn Vindu, Switch to Off (0) by/from: CAPI Control Handler
apr-30 12:14:21      Z-Wave   Device: Node 8 Z-Wave Volts Set to 231,99 (231,99 Volts)
apr-30 12:10:26      Z-Wave   Device: Node 6 Z-Wave Volts Set to 232,16 (232,16 Volts)
apr-30 12:10:21      Device Control   Device: 1. etg Gang Varmekabler, Switch to Off (0) by/from: CAPI Control Handler
apr-30 12:10:21      Device Control   Device: 2. etg Stue Ovn TV, Switch to Off (0) by/from: CAPI Control Handler
apr-30 12:10:21      Device Control   Device: 2. etg Stue Ovn Vindu, Switch to Off (0) by/from: CAPI Control Handler
apr-30 12:09:55      Buienradar   Incorrect amount of data received from Buienradar: (since 29.04.2018 22:17:16)
apr-30 12:09:34      Z-Wave   Device: Node 3 Z-Wave Luminance Set to 100 (Lux)
apr-30 12:09:32      Event   Running script statement immediately: &hs.setDeviceValueByRef(141,hs.DeviceValueEx(17),True)
apr-30 12:09:32      Event   Running script statement immediately: &hs.setDeviceValueByRef(124,hs.DeviceValueEx(17),True)
apr-30 12:09:32      Event   Event Trigger "Varmekontroll Stue_temp_RFXCOM"
apr-30 12:09:32      Z-Wave   Device: 2. etg Stue Temp, Sensor Set to 23,2 (C)
apr-30 12:09:21      Z-Wave   Device: Node 8 Z-Wave Volts Set to 232,35 (232,35 Volts)
apr-30 12:06:49      Z-Wave   Device: Node 2 Z-Wave Home Security Set to NOTIFICATION for type Home Security, Event: No Event
apr-30 12:06:49      Z-Wave   Device: 1. etg Gang Taklys, Dimmer Set to 0
apr-30 12:06:49      Device Control   Device: 1. etg Gang Taklys, Dimmer to Off (0)
apr-30 12:06:49      Event   Event Trigger "Gang Lys Gang av - Natt"
apr-30 12:06:49      Z-Wave   Device: 1. etg Gang Motion, Sensor Set to Off/Closed/No Motion
apr-30 12:05:40      Z-Wave   Device: Node 2 Z-Wave Home Security Set to NOTIFICATION for type Home Security, Event: Motion Detected
apr-30 12:05:40      Z-Wave   Device: 1. etg Gang Taklys, Dimmer Set to 10
apr-30 12:05:40      Device Control   Device: 1. etg Gang Taklys, Dimmer to Dim 10% (10)
apr-30 12:05:40      Event   Event Trigger "Gang Lys Gang på - Natt"
apr-30 12:05:40      Z-Wave   Device: 1. etg Gang Motion, Sensor Set to On/Open/Motion
apr-30 12:05:26      Z-Wave   Device: Node 6 Z-Wave Volts Set to 232,95 (232,95 Volts)
apr-30 12:05:21      Device Control   Device: 1. etg Gang Varmekabler, Switch to Off (0) by/from: CAPI Control Handler
apr-30 12:05:21      Device Control   Device: 2. etg Stue Ovn TV, Switch to Off (0) by/from: CAPI Control Handler
apr-30 12:05:21      Device Control   Device: 2. etg Stue Ovn Vindu, Switch to Off (0) by/from: CAPI Control Handler
apr-30 12:05:10      Z-Wave   Device: 1. etg Gang Inngangsdør, Sensor Set to Off/Closed/No Motion
apr-30 12:05:10      Z-Wave   Device: 1. etg Gang Inngangsdør, Notification Set to NOTIFICATION for type Access Control Notification, Event: Closed
apr-30 12:04:21      Z-Wave   Device: Node 8 Z-Wave Volts Set to 232,53 (232,53 Volts)
apr-30 12:02:25      Z-Wave   Device: 1. etg Gang Inngangsdør, Sensor Set to On/Open/Motion
apr-30 12:02:25      Z-Wave   Device: 1. etg Gang Inngangsdør, Notification Set to NOTIFICATION for type Access Control Notification, Event: Open
apr-30 12:00:26      Z-Wave   Device: Node 6 Z-Wave Volts Set to 233,41 (233,41 Volts)
apr-30 12:00:21      Device Control   Device: 1. etg Gang Varmekabler, Switch to Off (0) by/from: CAPI Control Handler
apr-30 12:00:21      Device Control   Device: 2. etg Stue Ovn TV, Switch to Off (0) by/from: CAPI Control Handler
apr-30 12:00:21      Device Control   Device: 2. etg Stue Ovn Vindu, Switch to Off (0) by/from: CAPI Control Handler
apr-30 11:59:21      Z-Wave   Device: Node 8 Z-Wave Volts Set to 233,38 (233,38 Volts)
apr-30 11:55:26      Z-Wave   Device: Node 6 Z-Wave Volts Set to 232,72 (232,72 Volts)
apr-30 11:55:21      Device Control   Device: 1. etg Gang Varmekabler, Switch to Off (0) by/from: CAPI Control Handler
apr-30 11:55:21      Device Control   Device: 2. etg Stue Ovn TV, Switch to Off (0) by/from: CAPI Control Handler
apr-30 11:55:21      Device Control   Device: 2. etg Stue Ovn Vindu, Switch to Off (0) by/from: CAPI Control Handler
apr-30 11:54:52      Buienradar   Incorrect amount of data received from Buienradar: (since 29.04.2018 22:17:16)
apr-30 11:54:21      Z-Wave   Device: Node 8 Z-Wave Volts Set to 231,99 (231,99 Volts)
apr-30 11:53:34      Z-Wave   Device: Node 2 Z-Wave Home Security Set to NOTIFICATION for type Home Security, Event: No Event
apr-30 11:53:34      Z-Wave   Device: 1. etg Gang Taklys, Dimmer Set to 0
apr-30 11:53:34      Device Control   Device: 1. etg Gang Taklys, Dimmer to Off (0)
apr-30 11:53:34      Event   Event Trigger "Gang Lys Gang av - Natt"
apr-30 11:53:34      Z-Wave   Device: 1. etg Gang Motion, Sensor Set to Off/Closed/No Motion
apr-30 11:52:25      Z-Wave   Device: Node 2 Z-Wave Home Security Set to NOTIFICATION for type Home Security, Event: Motion Detected
apr-30 11:52:25      Z-Wave   Device: 1. etg Gang Taklys, Dimmer Set to 10
apr-30 11:52:25      Device Control   Device: 1. etg Gang Taklys, Dimmer to Dim 10% (10)
apr-30 11:52:25      Event   Event Trigger "Gang Lys Gang på - Natt"
apr-30 11:52:25      Z-Wave   Device: 1. etg Gang Motion, Sensor Set to On/Open/Motion
apr-30 11:50:26      Z-Wave   Device: Node 6 Z-Wave Volts Set to 231,34 (231,34 Volts)
apr-30 11:50:21      Device Control   Device: 1. etg Gang Varmekabler, Switch to Off (0) by/from: CAPI Control Handler
apr-30 11:50:21      Device Control   Device: 2. etg Stue Ovn TV, Switch to Off (0) by/from: CAPI Control Handler
apr-30 11:50:21      Device Control   Device: 2. etg Stue Ovn Vindu, Switch to Off (0) by/from: CAPI Control Handler
apr-30 11:49:21      Z-Wave   Device: Node 8 Z-Wave Volts Set to 232,77 (232,77 Volts)
apr-30 11:45:26      Z-Wave   Device: Node 6 Z-Wave Volts Set to 233,66 (233,66 Volts)
apr-30 11:45:21      Device Control   Device: 1. etg Gang Varmekabler, Switch to Off (0) by/from: CAPI Control Handler
apr-30 11:45:21      Device Control   Device: 2. etg Stue Ovn TV, Switch to Off (0) by/from: CAPI Control Handler
apr-30 11:45:21      Device Control   Device: 2. etg Stue Ovn Vindu, Switch to Off (0) by/from: CAPI Control Handler
apr-30 11:44:21      Z-Wave   Device: Node 8 Z-Wave Volts Set to 232,75 (232,75 Volts)
apr-30 11:40:26      Z-Wave   Device: Node 6 Z-Wave Volts Set to 234 (234 Volts)
apr-30 11:40:21      Device Control   Device: 1. etg Gang Varmekabler, Switch to Off (0) by/from: CAPI Control Handler
apr-30 11:40:21      Device Control   Device: 2. etg Stue Ovn TV, Switch to Off (0) by/from: CAPI Control Handler
apr-30 11:40:21      Device Control   Device: 2. etg Stue Ovn Vindu, Switch to Off (0) by/from: CAPI Control Handler
apr-30 11:39:50      Buienradar   Incorrect amount of data received from Buienradar: (since 29.04.2018 22:17:16)
apr-30 11:39:21      Z-Wave   Device: Node 8 Z-Wave Volts Set to 231,95 (231,95 Volts)
apr-30 11:35:26      Z-Wave   Device: Node 6 Z-Wave Volts Set to 233,28 (233,28 Volts)
apr-30 11:35:21      Device Control   Device: 1. etg Gang Varmekabler, Switch to Off (0) by/from: CAPI Control Handler
apr-30 11:35:21      Device Control   Device: 2. etg Stue Ovn TV, Switch to Off (0) by/from: CAPI Control Handler
apr-30 11:35:21      Device Control   Device: 2. etg Stue Ovn Vindu, Switch to Off (0) by/from: CAPI Control Handler
apr-30 11:34:21      Z-Wave   Device: Node 8 Z-Wave Volts Set to 232,89 (232,89 Volts)
apr-30 11:30:26      Z-Wave   Device: Node 6 Z-Wave Volts Set to 232,92 (232,92 Volts)
apr-30 11:30:21      Device Control   Device: 1. etg Gang Varmekabler, Switch to Off (0) by/from: CAPI Control Handler
apr-30 11:30:21      Device Control   Device: 2. etg Stue Ovn TV, Switch to Off (0) by/from: CAPI Control Handler
apr-30 11:30:21      Device Control   Device: 2. etg Stue Ovn Vindu, Switch to Off (0) by/from: CAPI Control Handler
apr-30 11:29:21      Z-Wave   Device: Node 8 Z-Wave Volts Set to 234,29 (234,29 Volts)
apr-30 11:27:42      Z-Wave   Device: Node 2 Z-Wave Luminance Set to 4 (Lux)
apr-30 11:27:40      Event   Running script statement immediately: &hs.setDeviceValueByRef(145,hs.DeviceValueEx(9),True)
apr-30 11:27:40      Event   Event Trigger "Varmekontroll Gang_temp_RFXCOM"
apr-30 11:27:40      Z-Wave   Device: 1. etg Gang Temp, Sensor Set to 23,7 (C)
apr-30 11:25:26      Z-Wave   Device: Node 6 Z-Wave Volts Set to 233,6 (233,6 Volts)
apr-30 11:25:21      Device Control   Device: 1. etg Gang Varmekabler, Switch to Off (0) by/from: CAPI Control Handler
apr-30 11:25:21      Device Control   Device: 2. etg Stue Ovn TV, Switch to Off (0) by/from: CAPI Control Handler
apr-30 11:25:21      Device Control   Device: 2. etg Stue Ovn Vindu, Switch to Off (0) by/from: CAPI Control Handler
apr-30 11:24:47      Buienradar   Incorrect amount of data received from Buienradar: (since 29.04.2018 22:17:16)
apr-30 11:24:21      Z-Wave   Device: Node 8 Z-Wave Volts Set to 233,83 (233,83 Volts)
apr-30 11:20:26      Z-Wave   Device: Node 6 Z-Wave Volts Set to 233,11 (233,11 Volts)
apr-30 11:20:21      Device Control   Device: 1. etg Gang Varmekabler, Switch to Off (0) by/from: CAPI Control Handler
apr-30 11:20:21      Device Control   Device: 2. etg Stue Ovn TV, Switch to Off (0) by/from: CAPI Control Handler
apr-30 11:20:21      Device Control   Device: 2. etg Stue Ovn Vindu, Switch to Off (0) by/from: CAPI Control Handler
apr-30 11:19:21      Z-Wave   Device: Node 8 Z-Wave Volts Set to 232,13 (232,13 Volts)
apr-30 11:15:26      Z-Wave   Device: Node 6 Z-Wave Volts Set to 231,25 (231,25 Volts)
apr-30 11:15:21      Device Control   Device: 1. etg Gang Varmekabler, Switch to Off (0) by/from: CAPI Control Handler
apr-30 11:15:21      Device Control   Device: 2. etg Stue Ovn TV, Switch to Off (0) by/from: CAPI Control Handler
apr-30 11:15:21      Device Control   Device: 2. etg Stue Ovn Vindu, Switch to Off (0) by/from: CAPI Control Handler
apr-30 11:14:21      Z-Wave   Device: Node 8 Z-Wave Volts Set to 231,97 (231,97 Volts)
apr-30 11:10:26      Z-Wave   Device: Node 6 Z-Wave Volts Set to 232,52 (232,52 Volts)
apr-30 11:10:21      Device Control   Device: 1. etg Gang Varmekabler, Switch to Off (0) by/from: CAPI Control Handler
apr-30 11:10:21      Device Control   Device: 2. etg Stue Ovn TV, Switch to Off (0) by/from: CAPI Control Handler
apr-30 11:10:21      Device Control   Device: 2. etg Stue Ovn Vindu, Switch to Off (0) by/from: CAPI Control Handler
apr-30 11:09:44      Buienradar   Incorrect amount of data received from Buienradar: (since 29.04.2018 22:17:16)
apr-30 11:09:32      Z-Wave   Device: Node 3 Z-Wave Luminance Set to 107 (Lux)
apr-30 11:09:21      Z-Wave   Device: Node 8 Z-Wave Volts Set to 233,79 (233,79 Volts)
apr-30 11:05:26      Z-Wave   Device: Node 6 Z-Wave Volts Set to 232,71 (232,71 Volts)
apr-30 11:05:21      Device Control   Device: 1. etg Gang Varmekabler, Switch to Off (0) by/from: CAPI Control Handler
apr-30 11:05:21      Device Control   Device: 2. etg Stue Ovn TV, Switch to Off (0) by/from: CAPI Control Handler
apr-30 11:05:21      Device Control   Device: 2. etg Stue Ovn Vindu, Switch to Off (0) by/from: CAPI Control Handler
apr-30 11:04:20      Z-Wave   Device: Node 8 Z-Wave Volts Set to 232,13 (232,13 Volts)
apr-30 11:00:26      Z-Wave   Device: Node 6 Z-Wave Volts Set to 233,32 (233,32 Volts)
apr-30 11:00:21      Device Control   Device: 1. etg Gang Varmekabler, Switch to Off (0) by/from: CAPI Control Handler
apr-30 11:00:21      Device Control   Device: 2. etg Stue Ovn TV, Switch to Off (0) by/from: CAPI Control Handler
apr-30 11:00:21      Device Control   Device: 2. etg Stue Ovn Vindu, Switch to Off (0) by/from: CAPI Control Handler
apr-30 10:59:20      Z-Wave   Device: Node 8 Z-Wave Volts Set to 233,02 (233,02 Volts)
apr-30 10:55:26      Z-Wave   Device: Node 6 Z-Wave Volts Set to 233,83 (233,83 Volts)
apr-30 10:55:21      Device Control   Device: 1. etg Gang Varmekabler, Switch to Off (0) by/from: CAPI Control Handler
apr-30 10:55:21      Device Control   Device: 2. etg Stue Ovn TV, Switch to Off (0) by/from: CAPI Control Handler
apr-30 10:55:21      Device Control   Device: 2. etg Stue Ovn Vindu, Switch to Off (0) by/from: CAPI Control Handler
apr-30 10:54:42      Buienradar   Incorrect amount of data received from Buienradar: (since 29.04.2018 22:17:16)
apr-30 10:54:20      Z-Wave   Device: Node 8 Z-Wave Volts Set to 232,6 (232,6 Volts)
apr-30 10:50:26      Z-Wave   Device: Node 6 Z-Wave Volts Set to 232,67 (232,67 Volts)
apr-30 10:50:21      Device Control   Device: 1. etg Gang Varmekabler, Switch to Off (0) by/from: CAPI Control Handler
apr-30 10:50:21      Device Control   Device: 2. etg Stue Ovn TV, Switch to Off (0) by/from: CAPI Control Handler
apr-30 10:50:21      Device Control   Device: 2. etg Stue Ovn Vindu, Switch to Off (0) by/from: CAPI Control Handler
apr-30 10:49:20      Z-Wave   Device: Node 8 Z-Wave Volts Set to 231,45 (231,45 Volts)
apr-30 10:45:26      Z-Wave   Device: Node 6 Z-Wave Volts Set to 232,75 (232,75 Volts)
apr-30 10:45:21      Device Control   Device: 1. etg Gang Varmekabler, Switch to Off (0) by/from: CAPI Control Handler
apr-30 10:45:21      Device Control   Device: 2. etg Stue Ovn TV, Switch to Off (0) by/from: CAPI Control Handler
apr-30 10:45:21      Device Control   Device: 2. etg Stue Ovn Vindu, Switch to Off (0) by/from: CAPI Control Handler
apr-30 10:44:20      Z-Wave   Device: Node 8 Z-Wave Volts Set to 233,54 (233,54 Volts)
apr-30 10:40:26      Z-Wave   Device: Node 6 Z-Wave Volts Set to 232,61 (232,61 Volts)
apr-30 10:40:21      Device Control   Device: 1. etg Gang Varmekabler, Switch to Off (0) by/from: CAPI Control Handler
apr-30 10:40:21      Device Control   Device: 2. etg Stue Ovn TV, Switch to Off (0) by/from: CAPI Control Handler
apr-30 10:40:21      Device Control   Device: 2. etg Stue Ovn Vindu, Switch to Off (0) by/from: CAPI Control Handler
apr-30 10:39:39      Buienradar   Incorrect amount of data received from Buienradar: (since 29.04.2018 22:17:16)
apr-30 10:39:20      Z-Wave   Device: Node 8 Z-Wave Volts Set to 231,76 (231,76 Volts)
apr-30 10:35:26      Z-Wave   Device: Node 6 Z-Wave Volts Set to 231,39 (231,39 Volts)
apr-30 10:35:21      Device Control   Device: 1. etg Gang Varmekabler, Switch to Off (0) by/from: CAPI Control Handler
apr-30 10:35:21      Device Control   Device: 2. etg Stue Ovn TV, Switch to Off (0) by/from: CAPI Control Handler
apr-30 10:35:21      Device Control   Device: 2. etg Stue Ovn Vindu, Switch to Off (0) by/from: CAPI Control Handler
apr-30 10:34:19      Z-Wave   Device: Node 8 Z-Wave Volts Set to 233,77 (233,77 Volts)
apr-30 10:30:26      Z-Wave   Device: Node 6 Z-Wave Volts Set to 233,66 (233,66 Volts)
apr-30 10:30:21      Device Control   Device: 1. etg Gang Varmekabler, Switch to Off (0) by/from: CAPI Control Handler
apr-30 10:30:21      Device Control   Device: 2. etg Stue Ovn TV, Switch to Off (0) by/from: CAPI Control Handler
apr-30 10:30:21      Device Control   Device: 2. etg Stue Ovn Vindu, Switch to Off (0) by/from: CAPI Control Handler
apr-30 10:29:19      Z-Wave   Device: Node 8 Z-Wave Volts Set to 232,89 (232,89 Volts)
apr-30 10:25:26      Z-Wave   Device: Node 6 Z-Wave Volts Set to 233,41 (233,41 Volts)
apr-30 10:25:21      Device Control   Device: 1. etg Gang Varmekabler, Switch to Off (0) by/from: CAPI Control Handler
apr-30 10:25:21      Device Control   Device: 2. etg Stue Ovn TV, Switch to Off (0) by/from: CAPI Control Handler
apr-30 10:25:21      Device Control   Device: 2. etg Stue Ovn Vindu, Switch to Off (0) by/from: CAPI Control Handler
apr-30 10:24:36      Buienradar   Incorrect amount of data received from Buienradar: (since 29.04.2018 22:17:16)
apr-30 10:24:19      Z-Wave   Device: Node 8 Z-Wave Volts Set to 233,33 (233,33 Volts)
apr-30 10:20:26      Z-Wave   Device: Node 6 Z-Wave Volts Set to 231,92 (231,92 Volts)
apr-30 10:20:21      Device Control   Device: 1. etg Gang Varmekabler, Switch to Off (0) by/from: CAPI Control Handler
apr-30 10:20:21      Device Control   Device: 2. etg Stue Ovn TV, Switch to Off (0) by/from: CAPI Control Handler
apr-30 10:20:21      Device Control   Device: 2. etg Stue Ovn Vindu, Switch to Off (0) by/from: CAPI Control Handler
apr-30 10:19:19      Z-Wave   Device: Node 8 Z-Wave Volts Set to 232,12 (232,12 Volts)
apr-30 10:15:26      Z-Wave   Device: Node 6 Z-Wave Volts Set to 233,69 (233,69 Volts)
apr-30 10:15:21      Device Control   Device: 1. etg Gang Varmekabler, Switch to Off (0) by/from: CAPI Control Handler
apr-30 10:15:21      Device Control   Device: 2. etg Stue Ovn TV, Switch to Off (0) by/from: CAPI Control Handler
apr-30 10:15:21      Device Control   Device: 2. etg Stue Ovn Vindu, Switch to Off (0) by/from: CAPI Control Handler
apr-30 10:15:00      Log Info   The log database is currently 2,03MB in size.
apr-30 10:14:19      Z-Wave   Device: Node 8 Z-Wave Volts Set to 233,24 (233,24 Volts)
apr-30 10:10:26      Z-Wave   Device: Node 6 Z-Wave Volts Set to 231,8 (231,8 Volts)
apr-30 10:10:21      Device Control   Device: 1. etg Gang Varmekabler, Switch to Off (0) by/from: CAPI Control Handler
apr-30 10:10:21      Device Control   Device: 2. etg Stue Ovn TV, Switch to Off (0) by/from: CAPI Control Handler
apr-30 10:10:21      Device Control   Device: 2. etg Stue Ovn Vindu, Switch to Off (0) by/from: CAPI Control Handler
apr-30 10:09:34      Buienradar   Incorrect amount of data received from Buienradar: (since 29.04.2018 22:17:16)
apr-30 10:09:31      Z-Wave   Device: Node 3 Z-Wave Luminance Set to 90 (Lux)
apr-30 10:09:29      Event   Running script statement immediately: &hs.setDeviceValueByRef(141,hs.DeviceValueEx(17),True)
apr-30 10:09:29      Event   Running script statement immediately: &hs.setDeviceValueByRef(124,hs.DeviceValueEx(17),True)
apr-30 10:09:29      Event   Event Trigger "Varmekontroll Stue_temp_RFXCOM"
apr-30 10:09:29      Z-Wave   Device: 2. etg Stue Temp, Sensor Set to 23,1 (C)
apr-30 10:09:19      Z-Wave   Device: Node 8 Z-Wave Volts Set to 231,36 (231,36 Volts)
apr-30 10:05:26      Z-Wave   Device: Node 6 Z-Wave Volts Set to 232,44 (232,44 Volts)
apr-30 10:05:21      Device Control   Device: 1. etg Gang Varmekabler, Switch to Off (0) by/from: CAPI Control Handler
apr-30 10:05:21      Device Control   Device: 2. etg Stue Ovn TV, Switch to Off (0) by/from: CAPI Control Handler
apr-30 10:05:21      Device Control   Device: 2. etg Stue Ovn Vindu, Switch to Off (0) by/from: CAPI Control Handler
apr-30 10:04:19      Z-Wave   Device: Node 8 Z-Wave Volts Set to 232,92 (232,92 Volts)
apr-30 10:00:26      Z-Wave   Device: Node 6 Z-Wave Volts Set to 233,96 (233,96 Volts)
apr-30 10:00:21      Device Control   Device: 1. etg Gang Varmekabler, Switch to Off (0) by/from: CAPI Control Handler
apr-30 10:00:21      Device Control   Device: 2. etg Stue Ovn TV, Switch to Off (0) by/from: CAPI Control Handler
apr-30 10:00:21      Device Control   Device: 2. etg Stue Ovn Vindu, Switch to Off (0) by/from: CAPI Control Handler
apr-30 09:59:19      Z-Wave   Device: Node 8 Z-Wave Volts Set to 233,85 (233,85 Volts)
apr-30 09:55:26      Z-Wave   Device: Node 6 Z-Wave Volts Set to 236,04 (236,04 Volts)
apr-30 09:55:21      Device Control   Device: 1. etg Gang Varmekabler, Switch to Off (0) by/from: CAPI Control Handler
apr-30 09:55:21      Device Control   Device: 2. etg Stue Ovn TV, Switch to Off (0) by/from: CAPI Control Handler
apr-30 09:55:21      Device Control   Device: 2. etg Stue Ovn Vindu, Switch to Off (0) by/from: CAPI Control Handler
apr-30 09:54:31      Buienradar   Incorrect amount of data received from Buienradar: (since 29.04.2018 22:17:16)
apr-30 09:54:19      Z-Wave   Device: Node 8 Z-Wave Volts Set to 237,43 (237,43 Volts)
apr-30 09:50:26      Z-Wave   Device: Node 6 Z-Wave Volts Set to 236,24 (236,24 Volts)
apr-30 09:50:21      Device Control   Device: 1. etg Gang Varmekabler, Switch to Off (0) by/from: CAPI Control Handler
apr-30 09:50:20      Device Control   Device: 2. etg Stue Ovn TV, Switch to Off (0) by/from: CAPI Control Handler
apr-30 09:50:20      Device Control   Device: 2. etg Stue Ovn Vindu, Switch to Off (0) by/from: CAPI Control Handler
apr-30 09:49:19      Z-Wave   Device: Node 8 Z-Wave Volts Set to 236,29 (236,29 Volts)
apr-30 09:45:26      Z-Wave   Device: Node 6 Z-Wave Volts Set to 236,18 (236,18 Volts)
apr-30 09:45:20      Device Control   Device: 1. etg Gang Varmekabler, Switch to Off (0) by/from: CAPI Control Handler
apr-30 09:45:20      Device Control   Device: 2. etg Stue Ovn TV, Switch to Off (0) by/from: CAPI Control Handler
apr-30 09:45:20      Device Control   Device: 2. etg Stue Ovn Vindu, Switch to Off (0) by/from: CAPI Control Handler
apr-30 09:44:19      Z-Wave   Device: Node 8 Z-Wave Volts Set to 234,9 (234,9 Volts)
apr-30 09:40:26      Z-Wave   Device: Node 6 Z-Wave Volts Set to 235,2 (235,2 Volts)
apr-30 09:40:20      Device Control   Device: 1. etg Gang Varmekabler, Switch to Off (0) by/from: CAPI Control Handler
apr-30 09:40:20      Device Control   Device: 2. etg Stue Ovn TV, Switch to Off (0) by/from: CAPI Control Handler
apr-30 09:40:20      Device Control   Device: 2. etg Stue Ovn Vindu, Switch to Off (0) by/from: CAPI Control Handler
apr-30 09:39:28      Buienradar   Incorrect amount of data received from Buienradar: (since 29.04.2018 22:17:16)
apr-30 09:39:19      Z-Wave   Device: Node 8 Z-Wave Volts Set to 234,63 (234,63 Volts)
apr-30 09:35:26      Z-Wave   Device: Node 6 Z-Wave Volts Set to 234,58 (234,58 Volts)
apr-30 09:35:20      Device Control   Device: 1. etg Gang Varmekabler, Switch to Off (0) by/from: CAPI Control Handler
apr-30 09:35:20      Device Control   Device: 2. etg Stue Ovn TV, Switch to Off (0) by/from: CAPI Control Handler
apr-30 09:35:20      Device Control   Device: 2. etg Stue Ovn Vindu, Switch to Off (0) by/from: CAPI Control Handler
apr-30 09:34:18      Z-Wave   Device: Node 8 Z-Wave Volts Set to 234,82 (234,82 Volts)
apr-30 09:30:26      Z-Wave   Device: Node 6 Z-Wave Volts Set to 236,27 (236,27 Volts)
apr-30 09:30:20      Device Control   Device: 1. etg Gang Varmekabler, Switch to Off (0) by/from: CAPI Control Handler
apr-30 09:30:20      Device Control   Device: 2. etg Stue Ovn TV, Switch to Off (0) by/from: CAPI Control Handler
apr-30 09:30:20      Device Control   Device: 2. etg Stue Ovn Vindu, Switch to Off (0) by/from: CAPI Control Handler
apr-30 09:29:19      Z-Wave   Device: Node 8 Z-Wave Volts Set to 235,57 (235,57 Volts)
apr-30 09:27:39      Z-Wave   Device: Node 2 Z-Wave Luminance Set to 3 (Lux)
apr-30 09:27:38      Z-Wave   Device: 1. etg Gang Luftfuktighet, Sensor Set to 25 (%)
apr-30 09:25:26      Z-Wave   Device: Node 6 Z-Wave Volts Set to 233,32 (233,32 Volts)
apr-30 09:25:20      Device Control   Device: 1. etg Gang Varmekabler, Switch to Off (0) by/from: CAPI Control Handler
apr-30 09:25:20      Device Control   Device: 2. etg Stue Ovn TV, Switch to Off (0) by/from: CAPI Control Handler
apr-30 09:25:20      Device Control   Device: 2. etg Stue Ovn Vindu, Switch to Off (0) by/from: CAPI Control Handler
apr-30 09:24:26      Buienradar   Incorrect amount of data received from Buienradar: (since 29.04.2018 22:17:16)
apr-30 09:24:19      Z-Wave   Device: Node 8 Z-Wave Volts Set to 234,67 (234,67 Volts)
apr-30 09:20:26      Z-Wave   Device: Node 6 Z-Wave Volts Set to 236,38 (236,38 Volts)
apr-30 09:20:20      Device Control   Device: 1. etg Gang Varmekabler, Switch to Off (0) by/from: CAPI Control Handler
apr-30 09:20:20      Device Control   Device: 2. etg Stue Ovn TV, Switch to Off (0) by/from: CAPI Control Handler
apr-30 09:20:20      Device Control   Device: 2. etg Stue Ovn Vindu, Switch to Off (0) by/from: CAPI Control Handler
apr-30 09:19:19      Z-Wave   Device: Node 8 Z-Wave Volts Set to 235,09 (235,09 Volts)
apr-30 09:15:26      Z-Wave   Device: Node 6 Z-Wave Volts Set to 235,84 (235,84 Volts)
apr-30 09:15:20      Device Control   Device: 1. etg Gang Varmekabler, Switch to Off (0) by/from: CAPI Control Handler
apr-30 09:15:20      Device Control   Device: 2. etg Stue Ovn TV, Switch to Off (0) by/from: CAPI Control Handler
apr-30 09:15:20      Device Control   Device: 2. etg Stue Ovn Vindu, Switch to Off (0) by/from: CAPI Control Handler
apr-30 09:14:19      Z-Wave   Device: Node 8 Z-Wave Volts Set to 235,38 (235,38 Volts)
apr-30 09:10:26      Z-Wave   Device: Node 6 Z-Wave Volts Set to 234,63 (234,63 Volts)
apr-30 09:10:20      Device Control   Device: 1. etg Gang Varmekabler, Switch to Off (0) by/from: CAPI Control Handler
apr-30 09:10:20      Device Control   Device: 2. etg Stue Ovn TV, Switch to Off (0) by/from: CAPI Control Handler
apr-30 09:10:20      Device Control   Device: 2. etg Stue Ovn Vindu, Switch to Off (0) by/from: CAPI Control Handler
apr-30 09:09:29      Z-Wave   Device: Node 3 Z-Wave Luminance Set to 123 (Lux)
apr-30 09:09:23      Buienradar   Incorrect amount of data received from Buienradar: (since 29.04.2018 22:17:16)
apr-30 09:09:19      Z-Wave   Device: Node 8 Z-Wave Volts Set to 235,18 (235,18 Volts)
apr-30 09:06:00      Energy DB Info   All energy database compacting routines completed.
apr-30 09:06:00      Energy DB   Database is 0,1494141 MB in size. No further compaction needed.
apr-30 09:06:00      Energy DB Info   Compacting remaining data...
apr-30 09:06:00      Energy DB Info   Compacting data older than 4 months...
apr-30 09:06:00      Energy DB Info   Compacting data older than 1 year...
apr-30 09:06:00      Energy DB Info   Compacting data older than 3 years...
apr-30 09:06:00      Energy DB Info   Compacting data older than 5 years...
apr-30 09:06:00      Energy DB Info   Compacting data older than 10 years...
apr-30 09:06:00      Energy DB Info   Energy database compaction initiated.
apr-30 09:05:26      Z-Wave   Device: Node 6 Z-Wave Volts Set to 234,41 (234,41 Volts)
apr-30 09:05:20      Device Control   Device: 1. etg Gang Varmekabler, Switch to Off (0) by/from: CAPI Control Handler
apr-30 09:05:20      Device Control   Device: 2. etg Stue Ovn TV, Switch to Off (0) by/from: CAPI Control Handler
apr-30 09:05:20      Device Control   Device: 2. etg Stue Ovn Vindu, Switch to Off (0) by/from: CAPI Control Handler
apr-30 09:04:19      Z-Wave   Device: Node 8 Z-Wave Volts Set to 234,9 (234,9 Volts)
apr-30 09:00:26      Z-Wave   Device: Node 6 Z-Wave Volts Set to 236,24 (236,24 Volts)
apr-30 09:00:20      Device Control   Device: 1. etg Gang Varmekabler, Switch to Off (0) by/from: CAPI Control Handler
apr-30 09:00:20      Device Control   Device: 2. etg Stue Ovn TV, Switch to Off (0) by/from: CAPI Control Handler
apr-30 09:00:20      Device Control   Device: 2. etg Stue Ovn Vindu, Switch to Off (0) by/from: CAPI Control Handler
apr-30 08:59:19      Z-Wave   Device: Node 8 Z-Wave Volts Set to 234,84 (234,84 Volts)
apr-30 08:55:26      Z-Wave   Device: Node 6 Z-Wave Volts Set to 235,22 (235,22 Volts)
apr-30 08:55:20      Device Control   Device: 1. etg Gang Varmekabler, Switch to Off (0) by/from: CAPI Control Handler
apr-30 08:55:20      Device Control   Device: 2. etg Stue Ovn TV, Switch to Off (0) by/from: CAPI Control Handler
apr-30 08:55:20      Device Control   Device: 2. etg Stue Ovn Vindu, Switch to Off (0) by/from: CAPI Control Handler
apr-30 08:54:20      Buienradar   Incorrect amount of data received from Buienradar: (since 29.04.2018 22:17:16)
apr-30 08:54:19      Z-Wave   Device: Node 8 Z-Wave Volts Set to 233,85 (233,85 Volts)
apr-30 08:50:26      Z-Wave   Device: Node 6 Z-Wave Volts Set to 233,08 (233,08 Volts)
apr-30 08:50:20      Device Control   Device: 1. etg Gang Varmekabler, Switch to Off (0) by/from: CAPI Control Handler
apr-30 08:50:20      Device Control   Device: 2. etg Stue Ovn TV, Switch to Off (0) by/from: CAPI Control Handler
apr-30 08:50:20      Device Control   Device: 2. etg Stue Ovn Vindu, Switch to Off (0) by/from: CAPI Control Handler
apr-30 08:49:18      Z-Wave   Device: Node 8 Z-Wave Volts Set to 233,84 (233,84 Volts)
apr-30 08:45:26      Z-Wave   Device: Node 6 Z-Wave Volts Set to 234,13 (234,13 Volts)
apr-30 08:45:20      Device Control   Device: 1. etg Gang Varmekabler, Switch to Off (0) by/from: CAPI Control Handler
apr-30 08:45:20      Device Control   Device: 2. etg Stue Ovn TV, Switch to Off (0) by/from: CAPI Control Handler
apr-30 08:45:20      Device Control   Device: 2. etg Stue Ovn Vindu, Switch to Off (0) by/from: CAPI Control Handler
apr-30 08:44:18      Z-Wave   Device: Node 8 Z-Wave Volts Set to 232,39 (232,39 Volts)
apr-30 08:40:26      Z-Wave   Device: Node 6 Z-Wave Volts Set to 236,27 (236,27 Volts)
apr-30 08:40:20      Device Control   Device: 1. etg Gang Varmekabler, Switch to Off (0) by/from: CAPI Control Handler
apr-30 08:40:20      Device Control   Device: 2. etg Stue Ovn TV, Switch to Off (0) by/from: CAPI Control Handler
apr-30 08:40:20      Device Control   Device: 2. etg Stue Ovn Vindu, Switch to Off (0) by/from: CAPI Control Handler
apr-30 08:39:18      Z-Wave   Device: Node 8 Z-Wave Volts Set to 233,37 (233,37 Volts)
apr-30 08:39:18      Buienradar   Incorrect amount of data received from Buienradar: (since 29.04.2018 22:17:16)
apr-30 08:35:26      Z-Wave   Device: Node 6 Z-Wave Volts Set to 233,26 (233,26 Volts)
apr-30 08:35:20      Device Control   Device: 1. etg Gang Varmekabler, Switch to Off (0) by/from: CAPI Control Handler
apr-30 08:35:20      Device Control   Device: 2. etg Stue Ovn TV, Switch to Off (0) by/from: CAPI Control Handler
apr-30 08:35:20      Device Control   Device: 2. etg Stue Ovn Vindu, Switch to Off (0) by/from: CAPI Control Handler
apr-30 08:34:18      Z-Wave   Device: Node 8 Z-Wave Volts Set to 234,11 (234,11 Volts)
apr-30 08:30:26      Z-Wave   Device: Node 6 Z-Wave Volts Set to 231,16 (231,16 Volts)
apr-30 08:30:20      Device Control   Device: 1. etg Gang Varmekabler, Switch to Off (0) by/from: CAPI Control Handler
apr-30 08:30:20      Device Control   Device: 2. etg Stue Ovn TV, Switch to Off (0) by/from: CAPI Control Handler
apr-30 08:30:20      Device Control   Device: 2. etg Stue Ovn Vindu, Switch to Off (0) by/from: CAPI Control Handler
apr-30 08:29:18      Z-Wave   Device: Node 8 Z-Wave Volts Set to 233,14 (233,14 Volts)
apr-30 08:27:37      Z-Wave   Device: Node 2 Z-Wave Luminance Set to 4 (Lux)
apr-30 08:25:26      Z-Wave   Device: Node 6 Z-Wave Volts Set to 233,48 (233,48 Volts)
apr-30 08:25:20      Device Control   Device: 1. etg Gang Varmekabler, Switch to Off (0) by/from: CAPI Control Handler
apr-30 08:25:20      Device Control   Device: 2. etg Stue Ovn TV, Switch to Off (0) by/from: CAPI Control Handler
apr-30 08:25:20      Device Control   Device: 2. etg Stue Ovn Vindu, Switch to Off (0) by/from: CAPI Control Handler
apr-30 08:24:18      Z-Wave   Device: Node 8 Z-Wave Volts Set to 231,42 (231,42 Volts)
apr-30 08:24:14      Buienradar   Incorrect amount of data received from Buienradar: (since 29.04.2018 22:17:16)
apr-30 08:20:26      Z-Wave   Device: Node 6 Z-Wave Volts Set to 232,03 (232,03 Volts)
apr-30 08:20:20      Device Control   Device: 1. etg Gang Varmekabler, Switch to Off (0) by/from: CAPI Control Handler
apr-30 08:20:20      Device Control   Device: 2. etg Stue Ovn TV, Switch to Off (0) by/from: CAPI Control Handler
apr-30 08:20:20      Device Control   Device: 2. etg Stue Ovn Vindu, Switch to Off (0) by/from: CAPI Control Handler
apr-30 08:19:18      Z-Wave   Device: Node 8 Z-Wave Volts Set to 232,42 (232,42 Volts)
apr-30 08:15:26      Z-Wave   Device: Node 6 Z-Wave Volts Set to 233,47 (233,47 Volts)
apr-30 08:15:20      Device Control   Device: 1. etg Gang Varmekabler, Switch to Off (0) by/from: CAPI Control Handler
apr-30 08:15:20      Device Control   Device: 2. etg Stue Ovn TV, Switch to Off (0) by/from: CAPI Control Handler
apr-30 08:15:20      Device Control   Device: 2. etg Stue Ovn Vindu, Switch to Off (0) by/from: CAPI Control Handler
apr-30 08:14:18      Z-Wave   Device: Node 8 Z-Wave Volts Set to 233,05 (233,05 Volts)
apr-30 08:10:26      Z-Wave   Device: Node 6 Z-Wave Volts Set to 231,15 (231,15 Volts)
apr-30 08:10:20      Device Control   Device: 1. etg Gang Varmekabler, Switch to Off (0) by/from: CAPI Control Handler
apr-30 08:10:20      Device Control   Device: 2. etg Stue Ovn TV, Switch to Off (0) by/from: CAPI Control Handler
apr-30 08:10:20      Device Control   Device: 2. etg Stue Ovn Vindu, Switch to Off (0) by/from: CAPI Control Handler
apr-30 08:09:28      Z-Wave   Device: Node 3 Z-Wave Luminance Set to 132 (Lux)
apr-30 08:09:18      Z-Wave   Device: Node 8 Z-Wave Volts Set to 230,58 (230,58 Volts)
apr-30 08:09:11      Buienradar   Incorrect amount of data received from Buienradar: (since 29.04.2018 22:17:16)
apr-30 08:05:26      Z-Wave   Device: Node 6 Z-Wave Volts Set to 233,17 (233,17 Volts)
apr-30 08:05:20      Device Control   Device: 1. etg Gang Varmekabler, Switch to Off (0) by/from: CAPI Control Handler
apr-30 08:05:20      Device Control   Device: 2. etg Stue Ovn TV, Switch to Off (0) by/from: CAPI Control Handler
apr-30 08:05:20      Device Control   Device: 2. etg Stue Ovn Vindu, Switch to Off (0) by/from: CAPI Control Handler
apr-30 08:04:17      Z-Wave   Device: Node 8 Z-Wave Volts Set to 233,67 (233,67 Volts)
apr-30 08:00:26      Z-Wave   Device: Node 6 Z-Wave Volts Set to 230,99 (230,99 Volts)
apr-30 08:00:20      Device Control   Device: 1. etg Gang Varmekabler, Switch to Off (0) by/from: CAPI Control Handler
apr-30 08:00:20      Device Control   Device: 2. etg Stue Ovn TV, Switch to Off (0) by/from: CAPI Control Handler
apr-30 08:00:20      Device Control   Device: 2. etg Stue Ovn Vindu, Switch to Off (0) by/from: CAPI Control Handler
apr-30 07:59:17      Z-Wave   Device: Node 8 Z-Wave Volts Set to 230,4 (230,4 Volts)
apr-30 07:55:26      Z-Wave   Device: Node 6 Z-Wave Volts Set to 231,24 (231,24 Volts)
apr-30 07:55:20      Device Control   Device: 1. etg Gang Varmekabler, Switch to Off (0) by/from: CAPI Control Handler
apr-30 07:55:20      Device Control   Device: 2. etg Stue Ovn TV, Switch to Off (0) by/from: CAPI Control Handler
apr-30 07:55:20      Device Control   Device: 2. etg Stue Ovn Vindu, Switch to Off (0) by/from: CAPI Control Handler
apr-30 07:54:17      Z-Wave   Device: Node 8 Z-Wave Volts Set to 232,91 (232,91 Volts)
apr-30 07:54:09      Buienradar   Incorrect amount of data received from Buienradar: (since 29.04.2018 22:17:16)
apr-30 07:50:26      Z-Wave   Device: Node 6 Z-Wave Volts Set to 234,28 (234,28 Volts)
apr-30 07:50:20      Device Control   Device: 1. etg Gang Varmekabler, Switch to Off (0) by/from: CAPI Control Handler
apr-30 07:50:20      Device Control   Device: 2. etg Stue Ovn TV, Switch to Off (0) by/from: CAPI Control Handler
apr-30 07:50:20      Device Control   Device: 2. etg Stue Ovn Vindu, Switch to Off (0) by/from: CAPI Control Handler
apr-30 07:49:17      Z-Wave   Device: Node 8 Z-Wave Volts Set to 232 (232 Volts)
apr-30 07:45:26      Z-Wave   Device: Node 6 Z-Wave Volts Set to 232,49 (232,49 Volts)
apr-30 07:45:20      Device Control   Device: 1. etg Gang Varmekabler, Switch to Off (0) by/from: CAPI Control Handler
apr-30 07:45:20      Device Control   Device: 2. etg Stue Ovn TV, Switch to Off (0) by/from: CAPI Control Handler
apr-30 07:45:20      Device Control   Device: 2. etg Stue Ovn Vindu, Switch to Off (0) by/from: CAPI Control Handler
apr-30 07:44:17      Z-Wave   Device: Node 8 Z-Wave Volts Set to 233,77 (233,77 Volts)
apr-30 07:40:26      Z-Wave   Device: Node 6 Z-Wave Volts Set to 236,16 (236,16 Volts)
apr-30 07:40:20      Device Control   Device: 1. etg Gang Varmekabler, Switch to Off (0) by/from: CAPI Control Handler
apr-30 07:40:20      Device Control   Device: 2. etg Stue Ovn TV, Switch to Off (0) by/from: CAPI Control Handler
apr-30 07:40:20      Device Control   Device: 2. etg Stue Ovn Vindu, Switch to Off (0) by/from: CAPI Control Handler
apr-30 07:39:17      Z-Wave   Device: Node 8 Z-Wave Volts Set to 235,12 (235,12 Volts)
apr-30 07:39:06      Buienradar   Incorrect amount of data received from Buienradar: (since 29.04.2018 22:17:16)
apr-30 07:35:26      Z-Wave   Device: Node 6 Z-Wave Volts Set to 233,72 (233,72 Volts)
apr-30 07:35:20      Device Control   Device: 1. etg Gang Varmekabler, Switch to Off (0) by/from: CAPI Control Handler
apr-30 07:35:20      Device Control   Device: 2. etg Stue Ovn TV, Switch to Off (0) by/from: CAPI Control Handler
apr-30 07:35:20      Device Control   Device: 2. etg Stue Ovn Vindu, Switch to Off (0) by/from: CAPI Control Handler
apr-30 07:34:17      Z-Wave   Device: Node 8 Z-Wave Volts Set to 234,12 (234,12 Volts)
apr-30 07:30:26      Z-Wave   Device: Node 6 Z-Wave Volts Set to 234,28 (234,28 Volts)
apr-30 07:30:20      Device Control   Device: 1. etg Gang Varmekabler, Switch to Off (0) by/from: CAPI Control Handler
apr-30 07:30:20      Device Control   Device: 2. etg Stue Ovn TV, Switch to Off (0) by/from: CAPI Control Handler
apr-30 07:30:20      Device Control   Device: 2. etg Stue Ovn Vindu, Switch to Off (0) by/from: CAPI Control Handler
apr-30 07:29:17      Z-Wave   Device: Node 8 Z-Wave Volts Set to 234,35 (234,35 Volts)
apr-30 07:27:36      Z-Wave   Device: Node 2 Z-Wave Luminance Set to 7 (Lux)
apr-30 07:25:26      Z-Wave   Device: Node 6 Z-Wave Volts Set to 236,25 (236,25 Volts)
apr-30 07:25:20      Device Control   Device: 1. etg Gang Varmekabler, Switch to Off (0) by/from: CAPI Control Handler
apr-30 07:25:20      Device Control   Device: 2. etg Stue Ovn TV, Switch to Off (0) by/from: CAPI Control Handler
apr-30 07:25:20      Device Control   Device: 2. etg Stue Ovn Vindu, Switch to Off (0) by/from: CAPI Control Handler
apr-30 07:24:17      Z-Wave   Device: Node 8 Z-Wave Volts Set to 232,88 (232,88 Volts)
apr-30 07:24:03      Buienradar   Incorrect amount of data received from Buienradar: (since 29.04.2018 22:17:16)
apr-30 07:20:26      Z-Wave   Device: Node 6 Z-Wave Volts Set to 233,23 (233,23 Volts)
apr-30 07:20:20      Device Control   Device: 1. etg Gang Varmekabler, Switch to Off (0) by/from: CAPI Control Handler
apr-30 07:20:20      Device Control   Device: 2. etg Stue Ovn TV, Switch to Off (0) by/from: CAPI Control Handler
apr-30 07:20:20      Device Control   Device: 2. etg Stue Ovn Vindu, Switch to Off (0) by/from: CAPI Control Handler
apr-30 07:19:16      Z-Wave   Device: Node 8 Z-Wave Volts Set to 231,9 (231,9 Volts)
apr-30 07:15:26      Z-Wave   Device: Node 6 Z-Wave Volts Set to 230,62 (230,62 Volts)
apr-30 07:15:20      Device Control   Device: 1. etg Gang Varmekabler, Switch to Off (0) by/from: CAPI Control Handler
apr-30 07:15:20      Device Control   Device: 2. etg Stue Ovn TV, Switch to Off (0) by/from: CAPI Control Handler
apr-30 07:15:20      Device Control   Device: 2. etg Stue Ovn Vindu, Switch to Off (0) by/from: CAPI Control Handler
apr-30 07:15:00      Log Info   The log database is currently 1,93MB in size.
apr-30 07:14:16      Z-Wave   Device: Node 8 Z-Wave Volts Set to 234,79 (234,79 Volts)
apr-30 07:10:26      Z-Wave   Device: Node 6 Z-Wave Volts Set to 237,11 (237,11 Volts)
apr-30 07:10:20      Device Control   Device: 1. etg Gang Varmekabler, Switch to Off (0) by/from: CAPI Control Handler
apr-30 07:10:19      Device Control   Device: 2. etg Stue Ovn TV, Switch to Off (0) by/from: CAPI Control Handler
apr-30 07:10:19      Device Control   Device: 2. etg Stue Ovn Vindu, Switch to Off (0) by/from: CAPI Control Handler
apr-30 07:09:26      Z-Wave   Device: Node 3 Z-Wave Luminance Set to 79 (Lux)
apr-30 07:09:25      Z-Wave   Device: 2. etg Stue Luftfuktighet, Sensor Set to 24 (%)
apr-30 07:09:25      Event   Running script statement immediately: &hs.setDeviceValueByRef(141,hs.DeviceValueEx(17),True)
apr-30 07:09:25      Event   Running script statement immediately: &hs.setDeviceValueByRef(124,hs.DeviceValueEx(17),True)
apr-30 07:09:25      Event   Event Trigger "Varmekontroll Stue_temp_RFXCOM"
apr-30 07:09:25      Z-Wave   Device: 2. etg Stue Temp, Sensor Set to 23 (C)
apr-30 07:09:16      Z-Wave   Device: Node 8 Z-Wave Volts Set to 233,6 (233,6 Volts)
apr-30 07:09:00      Buienradar   Incorrect amount of data received from Buienradar: (since 29.04.2018 22:17:16)
apr-30 07:05:26      Z-Wave   Device: Node 6 Z-Wave Volts Set to 235,46 (235,46 Volts)
apr-30 07:05:19      Device Control   Device: 1. etg Gang Varmekabler, Switch to Off (0) by/from: CAPI Control Handler
apr-30 07:05:19      Device Control   Device: 2. etg Stue Ovn TV, Switch to Off (0) by/from: CAPI Control Handler
apr-30 07:05:19      Device Control   Device: 2. etg Stue Ovn Vindu, Switch to Off (0) by/from: CAPI Control Handler
apr-30 07:04:16      Z-Wave   Device: Node 8 Z-Wave Volts Set to 236,3 (236,3 Volts)
apr-30 07:00:26      Z-Wave   Device: Node 6 Z-Wave Volts Set to 235,21 (235,21 Volts)
apr-30 07:00:19      Device Control   Device: 1. etg Gang Varmekabler, Switch to Off (0) by/from: CAPI Control Handler
apr-30 07:00:19      Device Control   Device: 2. etg Stue Ovn TV, Switch to Off (0) by/from: CAPI Control Handler
apr-30 07:00:19      Device Control   Device: 2. etg Stue Ovn Vindu, Switch to Off (0) by/from: CAPI Control Handler
apr-30 06:59:16      Z-Wave   Device: Node 8 Z-Wave Volts Set to 233,29 (233,29 Volts)
apr-30 06:55:26      Z-Wave   Device: Node 6 Z-Wave Volts Set to 231,97 (231,97 Volts)
apr-30 06:55:19      Device Control   Device: 1. etg Gang Varmekabler, Switch to Off (0) by/from: CAPI Control Handler
apr-30 06:55:19      Device Control   Device: 2. etg Stue Ovn TV, Switch to Off (0) by/from: CAPI Control Handler
apr-30 06:55:19      Device Control   Device: 2. etg Stue Ovn Vindu, Switch to Off (0) by/from: CAPI Control Handler
apr-30 06:54:16      Z-Wave   Device: Node 8 Z-Wave Volts Set to 233,14 (233,14 Volts)
apr-30 06:53:57      Buienradar   Incorrect amount of data received from Buienradar: (since 29.04.2018 22:17:16)
apr-30 06:50:26      Z-Wave   Device: Node 6 Z-Wave Volts Set to 232,45 (232,45 Volts)
apr-30 06:50:19      Device Control   Device: 1. etg Gang Varmekabler, Switch to Off (0) by/from: CAPI Control Handler
apr-30 06:50:19      Device Control   Device: 2. etg Stue Ovn TV, Switch to Off (0) by/from: CAPI Control Handler
apr-30 06:50:19      Device Control   Device: 2. etg Stue Ovn Vindu, Switch to Off (0) by/from: CAPI Control Handler
apr-30 06:49:16      Z-Wave   Device: Node 8 Z-Wave Volts Set to 230,69 (230,69 Volts)
apr-30 06:45:26      Z-Wave   Device: Node 6 Z-Wave Volts Set to 232,52 (232,52 Volts)
apr-30 06:45:19      Device Control   Device: 1. etg Gang Varmekabler, Switch to Off (0) by/from: CAPI Control Handler
apr-30 06:45:19      Device Control   Device: 2. etg Stue Ovn TV, Switch to Off (0) by/from: CAPI Control Handler
apr-30 06:45:19      Device Control   Device: 2. etg Stue Ovn Vindu, Switch to Off (0) by/from: CAPI Control Handler
apr-30 06:44:16      Z-Wave   Device: Node 8 Z-Wave Volts Set to 232,23 (232,23 Volts)
apr-30 06:40:26      Z-Wave   Device: Node 6 Z-Wave Volts Set to 231,25 (231,25 Volts)
apr-30 06:40:19      Device Control   Device: 1. etg Gang Varmekabler, Switch to Off (0) by/from: CAPI Control Handler
apr-30 06:40:19      Device Control   Device: 2. etg Stue Ovn TV, Switch to Off (0) by/from: CAPI Control Handler
apr-30 06:40:19      Device Control   Device: 2. etg Stue Ovn Vindu, Switch to Off (0) by/from: CAPI Control Handler
apr-30 06:39:16      Z-Wave   Device: Node 8 Z-Wave Volts Set to 231,27 (231,27 Volts)
apr-30 06:38:55      Buienradar   Incorrect amount of data received from Buienradar: (since 29.04.2018 22:17:16)
apr-30 06:35:26      Z-Wave   Device: Node 2 Z-Wave Home Security Set to NOTIFICATION for type Home Security, Event: No Event
apr-30 06:35:26      Z-Wave   Device: Node 6 Z-Wave Volts Set to 232,78 (232,78 Volts)
apr-30 06:35:26      Z-Wave   Device: 1. etg Gang Taklys, Dimmer Set to 0
apr-30 06:35:26      Device Control   Device: 1. etg Gang Taklys, Dimmer to Off (0)
apr-30 06:35:26      Event   Event Trigger "Gang Lys Gang av - Natt"
apr-30 06:35:26      Z-Wave   Device: 1. etg Gang Motion, Sensor Set to Off/Closed/No Motion
apr-30 06:35:19      Device Control   Device: 1. etg Gang Varmekabler, Switch to Off (0) by/from: CAPI Control Handler
apr-30 06:35:19      Device Control   Device: 2. etg Stue Ovn TV, Switch to Off (0) by/from: CAPI Control Handler
apr-30 06:35:19      Device Control   Device: 2. etg Stue Ovn Vindu, Switch to Off (0) by/from: CAPI Control Handler
apr-30 06:35:17      Z-Wave   Device: 1. etg Gang Inngangsdør, Sensor Set to Off/Closed/No Motion
apr-30 06:35:17      Z-Wave   Device: 1. etg Gang Inngangsdør, Notification Set to NOTIFICATION for type Access Control Notification, Event: Closed
apr-30 06:35:12      Z-Wave   Device: 1. etg Gang Inngangsdør, Sensor Set to On/Open/Motion
apr-30 06:35:12      Z-Wave   Device: 1. etg Gang Inngangsdør, Notification Set to NOTIFICATION for type Access Control Notification, Event: Open
apr-30 06:34:17      Z-Wave   Device: Node 2 Z-Wave Home Security Set to NOTIFICATION for type Home Security, Event: Motion Detected
apr-30 06:34:17      Z-Wave   Device: 1. etg Gang Taklys, Dimmer Set to 10
apr-30 06:34:16      Device Control   Device: 1. etg Gang Taklys, Dimmer to Dim 10% (10)
apr-30 06:34:16      Event   Event Trigger "Gang Lys Gang på - Natt"
apr-30 06:34:16      Z-Wave   Device: 1. etg Gang Motion, Sensor Set to On/Open/Motion
apr-30 06:34:16      Z-Wave   Device: Node 8 Z-Wave Volts Set to 233,45 (233,45 Volts)
apr-30 06:30:26      Z-Wave   Device: Node 6 Z-Wave Volts Set to 232,91 (232,91 Volts)
apr-30 06:30:19      Device Control   Device: 1. etg Gang Varmekabler, Switch to Off (0) by/from: CAPI Control Handler
apr-30 06:30:19      Device Control   Device: 2. etg Stue Ovn TV, Switch to Off (0) by/from: CAPI Control Handler
apr-30 06:30:19      Device Control   Device: 2. etg Stue Ovn Vindu, Switch to Off (0) by/from: CAPI Control Handler
apr-30 06:29:16      Z-Wave   Device: Node 8 Z-Wave Volts Set to 233,96 (233,96 Volts)
apr-30 06:27:33      Event   Running script statement immediately: &hs.setDeviceValueByRef(145,hs.DeviceValueEx(9),True)
apr-30 06:27:33      Event   Event Trigger "Varmekontroll Gang_temp_RFXCOM"
apr-30 06:27:33      Z-Wave   Device: 1. etg Gang Temp, Sensor Set to 23,6 (C)
apr-30 06:25:26      Z-Wave   Device: Node 6 Z-Wave Volts Set to 232,37 (232,37 Volts)
apr-30 06:25:19      Device Control   Device: 1. etg Gang Varmekabler, Switch to Off (0) by/from: CAPI Control Handler
apr-30 06:25:19      Device Control   Device: 2. etg Stue Ovn TV, Switch to Off (0) by/from: CAPI Control Handler
apr-30 06:25:19      Device Control   Device: 2. etg Stue Ovn Vindu, Switch to Off (0) by/from: CAPI Control Handler
apr-30 06:24:16      Z-Wave   Device: Node 8 Z-Wave Volts Set to 233,56 (233,56 Volts)
apr-30 06:23:52      Buienradar   Incorrect amount of data received from Buienradar: (since 29.04.2018 22:17:16)
apr-30 06:20:26      Z-Wave   Device: Node 6 Z-Wave Volts Set to 233,02 (233,02 Volts)
apr-30 06:20:19      Device Control   Device: 1. etg Gang Varmekabler, Switch to Off (0) by/from: CAPI Control Handler
apr-30 06:20:19      Device Control   Device: 2. etg Stue Ovn TV, Switch to Off (0) by/from: CAPI Control Handler
apr-30 06:20:19      Device Control   Device: 2. etg Stue Ovn Vindu, Switch to Off (0) by/from: CAPI Control Handler
apr-30 06:19:16      Z-Wave   Device: Node 8 Z-Wave Volts Set to 233,84 (233,84 Volts)
apr-30 06:15:26      Z-Wave   Device: Node 6 Z-Wave Volts Set to 234,68 (234,68 Volts)
apr-30 06:15:19      Device Control   Device: 1. etg Gang Varmekabler, Switch to Off (0) by/from: CAPI Control Handler
apr-30 06:15:19      Device Control   Device: 2. etg Stue Ovn TV, Switch to Off (0) by/from: CAPI Control Handler
apr-30 06:15:19      Device Control   Device: 2. etg Stue Ovn Vindu, Switch to Off (0) by/from: CAPI Control Handler
apr-30 06:14:16      Z-Wave   Device: Node 8 Z-Wave Volts Set to 234,58 (234,58 Volts)
apr-30 06:10:26      Z-Wave   Device: Node 6 Z-Wave Volts Set to 234,62 (234,62 Volts)
apr-30 06:10:19      Device Control   Device: 1. etg Gang Varmekabler, Switch to Off (0) by/from: CAPI Control Handler
apr-30 06:10:19      Device Control   Device: 2. etg Stue Ovn TV, Switch to Off (0) by/from: CAPI Control Handler
apr-30 06:10:19      Device Control   Device: 2. etg Stue Ovn Vindu, Switch to Off (0) by/from: CAPI Control Handler
apr-30 06:09:25      Z-Wave   Device: Node 3 Z-Wave Luminance Set to 19 (Lux)
apr-30 06:09:24      Z-Wave   Device: 2. etg Stue Luftfuktighet, Sensor Set to 25 (%)
apr-30 06:09:24      Event   Running script statement immediately: &hs.setDeviceValueByRef(141,hs.DeviceValueEx(17),True)
apr-30 06:09:24      Event   Running script statement immediately: &hs.setDeviceValueByRef(124,hs.DeviceValueEx(17),True)
apr-30 06:09:24      Event   Event Trigger "Varmekontroll Stue_temp_RFXCOM"
apr-30 06:09:24      Z-Wave   Device: 2. etg Stue Temp, Sensor Set to 23,1 (C)
apr-30 06:09:16      Z-Wave   Device: Node 8 Z-Wave Volts Set to 234,54 (234,54 Volts)
apr-30 06:08:49      Buienradar   Incorrect amount of data received from Buienradar: (since 29.04.2018 22:17:16)
apr-30 06:05:26      Z-Wave   Device: Node 6 Z-Wave Volts Set to 230,94 (230,94 Volts)
apr-30 06:05:19      Device Control   Device: 1. etg Gang Varmekabler, Switch to Off (0) by/from: CAPI Control Handler
apr-30 06:05:19      Device Control   Device: 2. etg Stue Ovn TV, Switch to Off (0) by/from: CAPI Control Handler
apr-30 06:05:19      Device Control   Device: 2. etg Stue Ovn Vindu, Switch to Off (0) by/from: CAPI Control Handler
apr-30 06:04:16      Z-Wave   Device: Node 8 Z-Wave Volts Set to 231,96 (231,96 Volts)
apr-30 06:00:26      Z-Wave   Device: Node 6 Z-Wave Volts Set to 233,35 (233,35 Volts)
apr-30 06:00:19      Device Control   Device: 1. etg Gang Varmekabler, Switch to Off (0) by/from: CAPI Control Handler
apr-30 06:00:19      Device Control   Device: 2. etg Stue Ovn TV, Switch to Off (0) by/from: CAPI Control Handler
apr-30 06:00:19      Device Control   Device: 2. etg Stue Ovn Vindu, Switch to Off (0) by/from: CAPI Control Handler
apr-30 05:59:16      Z-Wave   Device: Node 8 Z-Wave Volts Set to 232,89 (232,89 Volts)
apr-30 05:55:26      Z-Wave   Device: Node 6 Z-Wave Volts Set to 232,46 (232,46 Volts)
apr-30 05:55:19      Device Control   Device: 1. etg Gang Varmekabler, Switch to Off (0) by/from: CAPI Control Handler
apr-30 05:55:19      Device Control   Device: 2. etg Stue Ovn TV, Switch to Off (0) by/from: CAPI Control Handler
apr-30 05:55:19      Device Control   Device: 2. etg Stue Ovn Vindu, Switch to Off (0) by/from: CAPI Control Handler
apr-30 05:54:16      Z-Wave   Device: Node 8 Z-Wave Volts Set to 231,7 (231,7 Volts)
apr-30 05:53:46      Buienradar   Incorrect amount of data received from Buienradar: (since 29.04.2018 22:17:16)
apr-30 05:50:26      Z-Wave   Device: Node 6 Z-Wave Volts Set to 232,13 (232,13 Volts)
apr-30 05:50:19      Device Control   Device: 1. etg Gang Varmekabler, Switch to Off (0) by/from: CAPI Control Handler
apr-30 05:50:19      Device Control   Device: 2. etg Stue Ovn TV, Switch to Off (0) by/from: CAPI Control Handler
apr-30 05:50:19      Device Control   Device: 2. etg Stue Ovn Vindu, Switch to Off (0) by/from: CAPI Control Handler
apr-30 05:49:15      Z-Wave   Device: Node 8 Z-Wave Volts Set to 231,95 (231,95 Volts)
apr-30 05:45:26      Z-Wave   Device: Node 6 Z-Wave Volts Set to 232,61 (232,61 Volts)
apr-30 05:45:19      Device Control   Device: 1. etg Gang Varmekabler, Switch to Off (0) by/from: CAPI Control Handler
apr-30 05:45:19      Device Control   Device: 2. etg Stue Ovn TV, Switch to Off (0) by/from: CAPI Control Handler
apr-30 05:45:19      Device Control   Device: 2. etg Stue Ovn Vindu, Switch to Off (0) by/from: CAPI Control Handler
apr-30 05:44:15      Z-Wave   Device: Node 8 Z-Wave Volts Set to 231,25 (231,25 Volts)
apr-30 05:40:26      Z-Wave   Device: Node 6 Z-Wave Volts Set to 234,37 (234,37 Volts)
apr-30 05:40:19      Device Control   Device: 1. etg Gang Varmekabler, Switch to Off (0) by/from: CAPI Control Handler
apr-30 05:40:19      Device Control   Device: 2. etg Stue Ovn TV, Switch to Off (0) by/from: CAPI Control Handler
apr-30 05:40:19      Device Control   Device: 2. etg Stue Ovn Vindu, Switch to Off (0) by/from: CAPI Control Handler
apr-30 05:39:15      Z-Wave   Device: Node 8 Z-Wave Volts Set to 234,13 (234,13 Volts)
apr-30 05:38:43      Buienradar   Incorrect amount of data received from Buienradar: (since 29.04.2018 22:17:16)
apr-30 05:35:26      Z-Wave   Device: Node 6 Z-Wave Volts Set to 232,85 (232,85 Volts)
apr-30 05:35:19      Device Control   Device: 1. etg Gang Varmekabler, Switch to Off (0) by/from: CAPI Control Handler
apr-30 05:35:19      Device Control   Device: 2. etg Stue Ovn TV, Switch to Off (0) by/from: CAPI Control Handler
apr-30 05:35:19      Device Control   Device: 2. etg Stue Ovn Vindu, Switch to Off (0) by/from: CAPI Control Handler
apr-30 05:34:14      Z-Wave   Device: Node 8 Z-Wave Volts Set to 231,78 (231,78 Volts)
apr-30 05:30:26      Z-Wave   Device: Node 6 Z-Wave Volts Set to 234,35 (234,35 Volts)
apr-30 05:30:19      Device Control   Device: 1. etg Gang Varmekabler, Switch to Off (0) by/from: CAPI Control Handler
apr-29 22:38:53      Device Control   Device: 2. etg Stue Set point VINDU to 18 °C (18)
apr-29 22:38:53      Device Control   Device: 2. etg Stue Set point TV to 18 °C (18)
apr-29 22:38:53      Event   Event Trigger "Varmekontroll Varme-bryter senk"
apr-29 22:38:53      Device Control   Device: Hus Hus Varme, Virtual to Off (0) by/from: CAPI Control Handler
apr-29 22:38:43      Z-Wave   Device: Node 6 Z-Wave Volts Set to 234,77 (234,77 Volts)
apr-29 22:38:37      Z-Wave   Device: 1. etg Gang Varmekabler, Switch Set to 0
apr-29 22:38:36      Z-Wave   Device: 2. etg Stue Ovn Vindu, Switch Set to 0
apr-29 22:38:36      Z-Wave   Device: 2. etg Stue Ovn TV, Switch Set to 0
apr-29 22:38:35      Device Control   Device: 1. etg Gang Varmekabler, Switch to Off (0) by/from: CAPI Control Handler
apr-29 22:38:35      Device Control   Device: 2. etg Stue Ovn Vindu, Switch to Off (0) by/from: CAPI Control Handler
apr-29 22:38:35      Device Control   Device: 2. etg Stue Ovn TV, Switch to Off (0) by/from: CAPI Control Handler
apr-29 22:38:35      Device Control   Device: 1. etg Gang Set point VARMEKABLER to 23 °C (23)
apr-29 22:38:35      Device Control   Device: 2. etg Stue Set point VINDU to 23 °C (23)
apr-29 22:38:35      Device Control   Device: 2. etg Stue Set point TV to 23 °C (23)
apr-29 22:38:35      Event   Event Trigger "Varmekontroll Varme-bryter hev"
apr-29 22:38:35      Device Control   Device: Hus Hus Varme, Virtual to On (100) by/from: CAPI Control Handler
apr-29 22:38:28      Z-Wave   Device: Node 6 Z-Wave Amperes Set to 0 (0 Amperes)
apr-29 22:38:27      Z-Wave   Device: Node 6 Z-Wave Volts Set to 233,94 (233,94 Volts)
apr-29 22:38:26      Z-Wave   Device: Node 6 Z-Wave Watts Set to 0 (0 Watts)
apr-29 22:38:20      Z-Wave   Device: Node 6 Z-Wave Amperes Set to 0,06 (0,06 Amperes)
apr-29 22:38:19      Z-Wave   Device: Node 6 Z-Wave Volts Set to 233,61 (233,61 Volts)
apr-29 22:38:18      Z-Wave   Device: Node 6 Z-Wave Watts Set to 1 (1 Watts)
apr-29 22:38:03      Z-Wave   Device: Node 6 Z-Wave Volts Set to 234,03 (234,03 Volts)
apr-29 22:37:57      Z-Wave   Device: 2. etg Stue Ovn Vindu, Switch Set to 255
apr-29 22:37:57      Device Control   Device: 2. etg Stue Ovn Vindu, Switch to On (255) by/from: CAPI Control Handler
apr-29 22:37:57      Device Control   Device: 2. etg Stue Set point VINDU to 5 °C (36,5) by/from: CAPI Control Handler
apr-29 22:37:55      Z-Wave   Device: 2. etg Stue Ovn TV, Switch Set to 255
apr-29 22:37:55      Device Control   Device: 2. etg Stue Ovn TV, Switch to On (255) by/from: CAPI Control Handler
apr-29 22:37:55      Device Control   Device: 2. etg Stue Set point TV to 5 °C (35) by/from: CAPI Control Handler
apr-29 22:36:55      Z-Wave   Device: 1. etg Gang Varmekabler, Switch Set to 255
apr-29 22:36:55      Device Control   Device: 1. etg Gang Varmekabler, Switch to On (255) by/from: CAPI Control Handler
apr-29 22:36:55      Device Control   Device: 1. etg Gang Set point VARMEKABLER to 5 °C (24,5) by/from: CAPI Control Handler
apr-29 22:36:51      Device Control   Device: 1. etg Gang Varmekabler, Switch to Off (0) by/from: CAPI Control Handler
apr-29 22:36:51      Device Control   Device: 1. etg Gang Set point VARMEKABLER to 5 °C (24) by/from: CAPI Control Handler
apr-29 22:36:41      Z-Wave   Device: 1. etg Gang Varmekabler, Switch Set to 0
apr-29 22:36:41      Device Control   Device: 1. etg Gang Varmekabler, Switch to Off (0) by/from: CAPI Control Handler
apr-29 22:36:41      Device Control   Device: 1. etg Gang Set point VARMEKABLER to 5 °C (19) by/from: CAPI Control Handler
apr-29 22:36:29      Event   Running script statement immediately: &hs.setDeviceValueByRef(145,hs.DeviceValueEx(9),True)
apr-29 22:36:29      Event   Event Trigger "Varmekontroll Gang_temp_RFXCOM"
apr-29 22:36:29      Event   Event Varmekontroll Gang_temp_RFXCOM triggered by the event page 'Run' button.
apr-29 22:35:32      Z-Wave   Device: Node 8 Z-Wave Volts Set to 231,65 (231,65 Volts)
apr-29 22:35:23      Z-Wave   Device: Node 6 Z-Wave Volts Set to 232,04 (232,04 Volts)
apr-29 22:35:16      Z-Wave   Device: 1. etg Gang Varmekabler, Switch Set to 255
apr-29 22:35:16      Device Control   Device: 1. etg Gang Varmekabler, Switch to On (255) by/from: CAPI Control Handler
apr-29 22:35:16      Device Control   Device: 2. etg Stue Ovn TV, Switch to Off (0) by/from: CAPI Control Handler
apr-29 22:35:16      Device Control   Device: 2. etg Stue Ovn Vindu, Switch to Off (0) by/from: CAPI Control Handler
apr-29 22:35:16      Device Control   Device: 1. etg Gang Varmekabler, Switch to On (255) by/from: CAPI Control Handler
apr-29 22:35:16      Device Control   Device: 1. etg Gang Set point VARMEKABLER to 5 °C (20) by/from: CAPI Control Handler
apr-29 22:34:20      Buienradar   Incorrect amount of data received from Buienradar: (since 29.04.2018 22:17:16)
apr-29 22:33:31      RFXCOM Error:   36 (AddVirtualDeviceParam) no VirDV1 present!
apr-29 22:31:46      RFXCOM Error:   36 (AddVirtualDeviceParam) no VirDV1 present!
apr-29 22:31:06      Z-Wave   Device: Node 6 Z-Wave Volts Set to 234,14 (234,14 Volts)
apr-29 22:30:59      Device Control   Device: 2. etg Stue Ovn Vindu, Switch to Off (0) by/from: CAPI Control Handler
apr-29 22:30:59      Device Control   Device: 2. etg Stue Ovn TV, Switch to Off (0) by/from: CAPI Control Handler
apr-29 22:30:59      Device Control   Device: 2. etg Stue Set point VINDU to 18 °C (18)
apr-29 22:30:59      Device Control   Device: 2. etg Stue Set point TV to 18 °C (18)
apr-29 22:30:59      Event   Event Trigger "Varmekontroll Varme-bryter senk"
apr-29 22:30:59      Device Control   Device: Hus Hus Varme, Virtual to Off (0) by/from: CAPI Control Handler
apr-29 22:30:34      Error   Exception in post processing (Events-0) of the Events page: Elementet er allerede lagt til. Nøkkel i katalog: varme-bryter senk. Nøkkelen som legges til: varme-bryter senk
apr-29 22:30:32      Z-Wave   Device: Node 8 Z-Wave Volts Set to 233,82 (233,82 Volts)
apr-29 22:30:22      Z-Wave   Device: Node 6 Z-Wave Volts Set to 234,6 (234,6 Volts)
apr-29 22:30:16      Device Control   Device: 2. etg Stue Ovn TV, Switch to Off (0) by/from: CAPI Control Handler
apr-29 22:30:16      Device Control   Device: 2. etg Stue Ovn Vindu, Switch to Off (0) by/from: CAPI Control Handler
apr-29 22:30:05      Z-Wave   Device: Node 6 Z-Wave Volts Set to 234,68 (234,68 Volts)
apr-29 22:29:58      Device Control   Device: 2. etg Stue Ovn Vindu, Switch to Off (0) by/from: CAPI Control Handler
apr-29 22:29:58      Device Control   Device: 2. etg Stue Ovn TV, Switch to Off (0) by/from: CAPI Control Handler
apr-29 22:29:58      Device Control   Device: 2. etg Stue Set point VINDU to 23 °C (23)
apr-29 22:29:58      Device Control   Device: 2. etg Stue Set point TV to 23 °C (23)
apr-29 22:29:58      Event   Event Trigger "Varmekontroll Varme-bryter senk"
apr-29 22:29:58      Device Control   Device: Hus Hus Varme, Virtual to On (100) by/from: CAPI Control Handler
apr-29 22:29:29      Device Control   Device: 2. etg Stue Ovn TV, Switch to Off (0) by/from: CAPI Control Handler
apr-29 22:29:29      Device Control   Device: 2. etg Stue Set point TV to 5 °C (18,5) by/from: CAPI Control Handler
apr-29 22:29:27      Z-Wave   Device: Node 6 Z-Wave Volts Set to 234,86 (234,86 Volts)
apr-29 22:29:21      Device Control   Device: 2. etg Stue Ovn Vindu, Switch to Off (0) by/from: CAPI Control Handler
apr-29 22:29:21      Device Control   Device: 2. etg Stue Set point VINDU to 5 °C (21,5) by/from: CAPI Control Handler
apr-29 22:27:22      Z-Wave   Device: Node 2 Z-Wave Luminance Set to 1 (Lux)
apr-29 22:26:12      Z-Wave   Device: Node 6 Z-Wave Volts Set to 233,08 (233,08 Volts)
apr-29 22:26:06      Device Control   Device: 2. etg Stue Ovn Vindu, Switch to Off (0) by/from: CAPI Control Handler
apr-29 22:26:06      Device Control   Device: 2. etg Stue Set point to 5 °C (23) by/from: CAPI Control Handler
apr-29 22:26:03      Device Control   Device: 2. etg Stue Ovn TV, Switch to Off (0) by/from: CAPI Control Handler
apr-29 22:26:03      Device Control   Device: 2. etg Stue Set point to 5 °C (23) by/from: CAPI Control Handler
apr-29 22:25:54      Z-Wave   Device: 2. etg Stue Ovn TV, Switch Set to 0
apr-29 22:25:53      Device Control   Device: 2. etg Stue Ovn TV, Switch to Off (0) by/from: CAPI Control Handler
apr-29 22:25:53      Device Control   Device: 2. etg Stue Set point to 5 °C (21,5) by/from: CAPI Control Handler
apr-29 22:25:39      Z-Wave   Device: 2. etg Stue Ovn TV, Switch Set to 255
apr-29 22:25:39      Device Control   Device: 2. etg Stue Ovn TV, Switch to On (255) by/from: CAPI Control Handler
apr-29 22:25:39      Device Control   Device: 2. etg Stue Set point to 5 °C (32,5) by/from: CAPI Control Handler
apr-29 22:25:32      Z-Wave   Device: Node 8 Z-Wave Volts Set to 232,83 (232,83 Volts)
apr-29 22:25:22      Z-Wave   Device: Node 6 Z-Wave Volts Set to 233,1 (233,1 Volts)
apr-29 22:25:19      Device Control   Device: 2. etg Stue Ovn TV, Switch to Off (0) by/from: CAPI Control Handler
apr-29 22:25:19      Device Control   Device: 2. etg Stue Set point to 5 °C (7,5) by/from: CAPI Control Handler
apr-29 22:25:16      Device Control   Device: 2. etg Stue Ovn TV, Switch to Off (0) by/from: CAPI Control Handler
apr-29 22:25:16      Device Control   Device: 2. etg Stue Ovn Vindu, Switch to Off (0) by/from: CAPI Control Handler
apr-29 22:25:14      Event   Running script statement immediately: &hs.setDeviceValueByRef(141,hs.DeviceValueEx(17),True)
apr-29 22:25:14      Event   Running script statement immediately: &hs.setDeviceValueByRef(124,hs.DeviceValueEx(17),True)
apr-29 22:25:14      Event   Event Trigger "Varmekontroll Stue_temp_RFXCOM"
apr-29 22:25:14      Event   Event Varmekontroll Stue_temp_RFXCOM triggered by the event page 'Run' button.
apr-29 22:24:59      Event   Running script statement immediately: &hs.setDeviceValueByRef(141,hs.DeviceValueEx(17),True)
apr-29 22:24:59      Event   Running script statement immediately: &hs.setDeviceValueByRef(124,hs.DeviceValueEx(17),True)
apr-29 22:24:59      Event   Event Trigger "Varmekontroll Stue_temp_RFXCOM"
apr-29 22:24:59      Event   Event Varmekontroll Stue_temp_RFXCOM triggered by the event page 'Run' button.
apr-29 22:22:53      RFXCOM Error:   36 (AddVirtualDeviceParam) no VirDV1 present!
apr-29 22:20:31      Z-Wave   Device: Node 8 Z-Wave Volts Set to 233,03 (233,03 Volts)
apr-29 22:20:22      Z-Wave   Device: Node 6 Z-Wave Volts Set to 233,13 (233,13 Volts)
apr-29 22:20:16      Device Control   Device: 2. etg Stue Ovn Vindu, Switch to Off (0) by/from: CAPI Control Handler
apr-29 22:19:16      Buienradar   Too many consecutive errors detected, error logging interval reduced to every 15 minutes...
apr-29 22:19:16      Buienradar   Incorrect amount of data received from Buienradar:
apr-29 22:18:46      Buienradar   Incorrect amount of data received from Buienradar:
apr-29 22:18:16      Buienradar   Incorrect amount of data received from Buienradar:
apr-29 22:18:14      Z-Wave   Device: Node 6 Z-Wave Volts Set to 232,26 (232,26 Volts)
apr-29 22:18:08      Z-Wave   Device: 2. etg Stue Ovn Vindu, Switch Set to 0
apr-29 22:18:08      Device Control   Device: 2. etg Stue Ovn Vindu, Switch to Off (0) by/from: CAPI Control Handler
apr-29 22:18:08      Device Control   Device: 2. etg Stue Set point to 5 °C (23,5) by/from: CAPI Control Handler
apr-29 22:18:00      Z-Wave   Device: Node 6 Z-Wave Volts Set to 233,7 (233,7 Volts)
apr-29 22:17:55      Z-Wave   Device: 2. etg Stue Ovn Vindu, Switch Set to 255
apr-29 22:17:54      Device Control   Device: 2. etg Stue Ovn Vindu, Switch to On (255) by/from: CAPI Control Handler
apr-29 22:17:54      Device Control   Device: 2. etg Stue Set point to 5 °C (27) by/from: CAPI Control Handler
apr-29 22:17:47      TTS   Speak ():Welcome to Home-Seer
apr-29 22:17:47      Z-Wave   Starting Z-Wave Polling for Network C9FECFB9...
apr-29 22:17:46      Buienradar   Incorrect amount of data received from Buienradar:
apr-29 22:17:21      Z-Wave   *******************************************************************************
apr-29 22:17:21      Z-Wave   STARTUP COMPLETE: All configured interfaces were successfully initialized.
apr-29 22:17:21      Z-Wave   *******************************************************************************
apr-29 22:17:20      Z-Wave   Aeotec Z-wave stick: ......................................................................
apr-29 22:17:20      Z-Wave   Aeotec Z-wave stick: .............................. FINISHED ..............................
apr-29 22:17:20      Z-Wave   Aeotec Z-wave stick: ......................................................................
apr-29 22:17:20      Z-Wave   Aeotec Z-wave stick is the SIS for the network.
apr-29 22:17:20      Z-Wave   Aeotec Z-wave stick There is a SUC/SIS in the network.
apr-29 22:17:20      Z-Wave   Aeotec Z-wave stick Controller is static lib.
apr-29 22:17:20      Z-Wave   Aeotec Z-wave stick Controller chip type is ZW050x.
apr-29 22:17:19      Z-Wave   The interface's security support has been set.
apr-29 22:17:19      Z-Wave   Aeotec Z-wave stick: Found 9 Z-Wave nodes in interface node ID 1 (Aeotec Z-wave stick)
apr-29 22:17:19      Z-Wave   Aeotec Z-wave stick: Z-Wave interface node ID: 1, Home ID: C9FECFB9
apr-29 22:17:19      Z-Wave   Aeotec Z-wave stick: Z-Wave Serial API version: 5
apr-29 22:17:19      Z-Wave   Aeotec Z-wave stick: Z-Wave services for the SECURITY COMMAND CLASS were successfully started.
apr-29 22:17:19      Z-Wave   Aeotec Z-wave stick: Controller firmware version: 1.0
apr-29 22:17:19      Z-Wave   Aeotec Z-wave stick: Controller Manufacturer: Aeon Labs, ID=0x5A, Type=0x1
apr-29 22:17:17      Z-Wave   Aeotec Z-wave stick: Getting node information from controller...
apr-29 22:17:17      Z-Wave   Aeotec Z-wave stick: The Z-Wave API Execution Thread was Started or Restarted.
apr-29 22:17:17      Z-Wave   Aeotec Z-wave stick: The Z-Wave Command Execution Thread was Started or Restarted.
apr-29 22:17:17      Z-Wave   465 Simple AV Control Command Class Control Commands have been loaded successfully.
apr-29 22:17:17      Z-Wave   Aeotec Z-wave stick: ----------------------------------------------------------------------
apr-29 22:17:17      Z-Wave   Initializing Z-Wave interface Aeotec Z-wave stick (Aeon Labs Aeotec Z-Stick) on COM5
apr-29 22:17:17      Z-Wave   Aeotec Z-wave stick: ----------------------------------------------------------------------
apr-29 22:17:17      Z-Wave   Aeotec Z-wave stick: ======================================================================
apr-29 22:17:17      Z-Wave   0 event triggers were loaded from HomeSeer.
apr-29 22:17:17      Z-Wave   0 event actions were loaded from HomeSeer.
apr-29 22:17:17      Starting Plug-In   Plugin Z-Wave started successfully in 505 milliseconds
apr-29 22:17:17      Info   System connected to MyHS Service successfully with license ID 112304.
apr-29 22:17:16      Z-Wave   47 total Z-Wave Data Objects loaded.
apr-29 22:17:16      Z-Wave   Network C9FECFB9 has 47 device data elements.
apr-29 22:17:16      Z-Wave   1 Networks were restored from the data in the database... Building data connections.
apr-29 22:17:16      Z-Wave   Loading Z-Wave Data Objects...
apr-29 22:17:16      Z-Wave   1 total Z-Wave Network Objects loaded.
apr-29 22:17:16      Z-Wave   Loading Z-Wave Network Objects...
apr-29 22:17:16      Info   System connected to MyHS Service, waiting for acknowledge...
apr-29 22:17:16      Z-Wave   Database: Opening (Mode=Read Only) up HomeSeer database C:\Program Files (x86)\HomeSeer HS3\Data\Z-Wave\Z-Wave2.db
apr-29 22:17:16      Startup   Start up complete.
apr-29 22:17:16      Startup   HSSentry is disabled in Setup, sentry will not be started.
apr-29 22:17:16      Startup   (Startup.vb script) No speaker clients detected, waiting up to 30 seconds for any to connect...
apr-29 22:17:16      Startup   (Startup.vb script) Scripting is OK and is now running Startup.vb
apr-29 22:17:16      Z-Wave   InitIO called, plug-in version 3.0.1.190 is being initialized...
apr-29 22:17:16      Startup   Starting Event Scheduler...
apr-29 22:17:16      Starting Plug-In   Initializing plugin Z-Wave ...
apr-29 22:17:16      Starting Plug-In   Plugin EasyTrigger started successfully in 104 milliseconds
apr-29 22:17:16      EasyTrigger   INFO Found 0 device group value triggers
apr-29 22:17:16      EasyTrigger   INFO Refreshing list of device group value triggers to monitor
apr-29 22:17:16      EasyTrigger   INFO Found 0 random triggers
apr-29 22:17:16      EasyTrigger   INFO Refreshing list of random triggers to monitor
apr-29 22:17:16      EasyTrigger   INFO Found 0 schedule triggers
apr-29 22:17:16      EasyTrigger   INFO Refreshing list of schedule triggers to monitor
apr-29 22:17:16      EasyTrigger   INFO Found 0 device's value conditions that need monitoring
apr-29 22:17:16      EasyTrigger   INFO Found 0 device's value triggers
apr-29 22:17:16      EasyTrigger   INFO Refreshing list of device's value triggers to monitor
apr-29 22:17:16      EasyTrigger   INFO Found 0 device's string triggers
apr-29 22:17:16      EasyTrigger   INFO Refreshing list of device's string triggers to monitor
apr-29 22:17:16      EasyTrigger   INFO EasyTrigger version 3.0.0.46
apr-29 22:17:16      Starting Plug-In   Initializing plugin EasyTrigger ...
apr-29 22:17:16      Starting Plug-In   Plugin RFXCOM started successfully in 198 milliseconds
apr-29 22:17:16      RFXCOM   36 (InitIO) RFXCOM version is:30.0.0.36
apr-29 22:17:16      Startup   Running the startup script Startup.vb
apr-29 22:17:16      Startup   Starting Find service...
apr-29 22:17:16      Startup   Updater services starting...
apr-29 22:17:16      Web Server   Web Server authorized local login successful from: 192.168.1.6 User: Henrik
apr-29 22:17:16      Starting Plug-In   Initializing plugin RFXCOM ...
apr-29 22:17:16      Starting Plug-In   Plugin Buienradar started successfully in 447 milliseconds
apr-29 22:17:16      Buienradar   Incorrect amount of data received from Buienradar:
apr-29 22:17:16      Database   Opening (Mode=Read/Write) up HomeSeer Energy database C:\Program Files (x86)\HomeSeer HS3\Data\Energy\Energy.hsd
apr-29 22:17:16      Speech   Listening for remote speaker connections on port 10401
apr-29 22:17:16      Startup   Initializing Speaker Client Interface
apr-29 22:17:16      Startup   Start automation engine...
apr-29 22:17:15      Buienradar   Initializing plugin Buienradar version 3.0.0.21
apr-29 22:17:15      Starting Plug-In   Initializing plugin Buienradar ...
apr-29 22:17:15      Startup   Creating ASP.NET application host...
apr-29 22:17:15      Info   Plugin Z-Wave has connected. IP:127.0.0.1:49429
apr-29 22:17:15      Web Server   Web Server started on port 80
apr-29 22:17:15      Web Server   Local IP address (subnet) is: 192.168.1.152 (255.255.255.0)
apr-29 22:17:15      Info   Plugin RFXCOM has connected. IP:127.0.0.1:49427
apr-29 22:17:15      Info   Plugin Buienradar has connected. IP:127.0.0.1:49423
apr-29 22:17:15      Info   Plugin EasyTrigger has connected. IP:127.0.0.1:49424
apr-29 22:17:15      Startup   HStouch server started, waiting for clients to connect.
apr-29 22:17:15      HSTouch Server   Server started on port 10200
apr-29 22:17:15      Plug-In   Finished initializing plug-in Z-Wave
apr-29 22:17:15      Plug-In   Finished initializing plug-in EasyTrigger
apr-29 22:17:15      Plug-In   Interface EasyTrigger is running as a trial, 30 days remaining.
apr-29 22:17:15      Plug-In   Finished initializing plug-in RFXCOM
apr-29 22:17:15      Plug-In   Interface RFXCOM is running as a trial, 30 days remaining.
apr-29 22:17:15      Plug-In   Finished initializing plug-in Buienradar
apr-29 22:17:15      Startup   Initializing Plug-Ins
apr-29 22:17:15      Plug-In   Found plug-in: Z-Wave, version: 3.0.1.190
apr-29 22:17:15      Plug-In   Found plug-in: RFXCOM, version: 30.0.0.36
apr-29 22:17:15      Plug-In   Found plug-in: HAI OmniStat, version: 3.0.1.4
apr-29 22:17:15      Plug-In   Found plug-in: EasyTrigger, version: 3.0.0.46
apr-29 22:17:15      Plug-In   Found plug-in: Buienradar, version: 3.0.0.21
apr-29 22:17:15      Startup   Checking for available plug-ins
apr-29 22:17:15      Info   Remote plug-in API interface started on port 10400
apr-29 22:17:15      Startup   This version of HomeSeer is registered as a HS3PRO version.
apr-29 22:17:15      Startup   Creating Speaker Client Interface Object...
apr-29 22:17:15      Startup   HomeSeer version is: 3.0.0.435
apr-29 22:17:15      Load Config   Loading TIMERS...
apr-29 22:17:15      Load Config   Loading COUNTERS...
apr-29 22:17:15      Load Config   5 total events loaded.
apr-29 22:17:15      Load Config   Loading Events...
apr-29 22:17:15      Load Config   Loading Event Groups...
apr-29 22:17:15      Load Config   60 total devices loaded.
apr-29 22:17:15      Database   Loading Devices...
apr-29 22:17:15      Database   Opening (Mode=Read Only) up HomeSeer database C:\Program Files (x86)\HomeSeer HS3\Data\HomeSeerData.hsd
apr-29 22:17:15      Startup   Loading configuration file ...
apr-29 22:17:15      Startup   Database SAVE process started.
apr-29 22:17:15      Startup   Local voice recognition class started.
apr-29 22:17:15      Startup   HSPhone external interface class started.
apr-29 22:17:15      Startup   Plug-In Interface class started.
apr-29 22:17:15      Startup   E-Mail RECEIVE class started.
apr-29 22:17:15      Startup   E-Mail SEND class started.
apr-29 22:17:15      Startup   Web server class started.
apr-29 22:17:15      Startup   Application interface class started.
apr-29 22:17:15      Startup   COM port classes started.
apr-29 22:17:15      Startup   Creating Class Objects...
apr-29 22:17:15      Startup
apr-29 22:17:15      Startup   ********************************************************************************
apr-29 22:17:15      Startup   HomeSeer version 3.0.0.435 Edition: HS3 Pro Starting Now
apr-29 22:17:15      Startup   ********************************************************************************
apr-29 22:17:15      Startup
apr-29 22:17:15      Startup   Settings Loaded.
apr-29 22:38:53      Device Control   Device: 1. etg Gang Set point VARMEKABLER to 18 °C (18)
apr-29 22:38:53      Device Control   Device: 2. etg Stue Set point VINDU to 18 °C (18)
apr-29 22:38:53      Device Control   Device: 2. etg Stue Set point TV to 18 °C (18)
apr-29 22:38:53      Event   Event Trigger "Varmekontroll Varme-bryter senk"
apr-29 22:38:53      Device Control   Device: Hus Hus Varme, Virtual to Off (0) by/from: CAPI Control Handler
apr-29 22:38:43      Z-Wave   Device: Node 6 Z-Wave Volts Set to 234,77 (234,77 Volts)
apr-29 22:38:37      Z-Wave   Device: 1. etg Gang Varmekabler, Switch Set to 0
apr-29 22:38:36      Z-Wave   Device: 2. etg Stue Ovn Vindu, Switch Set to 0
apr-29 22:38:36      Z-Wave   Device: 2. etg Stue Ovn TV, Switch Set to 0
apr-29 22:38:35      Device Control   Device: 1. etg Gang Varmekabler, Switch to Off (0) by/from: CAPI Control Handler
apr-29 22:38:35      Device Control   Device: 2. etg Stue Ovn Vindu, Switch to Off (0) by/from: CAPI Control Handler
apr-29 22:38:35      Device Control   Device: 2. etg Stue Ovn TV, Switch to Off (0) by/from: CAPI Control Handler
apr-29 22:38:35      Device Control   Device: 1. etg Gang Set point VARMEKABLER to 23 °C (23)
apr-29 22:38:35      Device Control   Device: 2. etg Stue Set point VINDU to 23 °C (23)
apr-29 22:38:35      Device Control   Device: 2. etg Stue Set point TV to 23 °C (23)
apr-29 22:38:35      Event   Event Trigger "Varmekontroll Varme-bryter hev"
apr-29 22:38:35      Device Control   Device: Hus Hus Varme, Virtual to On (100) by/from: CAPI Control Handler
apr-29 22:38:28      Z-Wave   Device: Node 6 Z-Wave Amperes Set to 0 (0 Amperes)
apr-29 22:38:27      Z-Wave   Device: Node 6 Z-Wave Volts Set to 233,94 (233,94 Volts)
apr-29 22:38:26      Z-Wave   Device: Node 6 Z-Wave Watts Set to 0 (0 Watts)
apr-29 22:38:20      Z-Wave   Device: Node 6 Z-Wave Amperes Set to 0,06 (0,06 Amperes)
apr-29 22:38:19      Z-Wave   Device: Node 6 Z-Wave Volts Set to 233,61 (233,61 Volts)
apr-29 22:38:18      Z-Wave   Device: Node 6 Z-Wave Watts Set to 1 (1 Watts)
apr-29 22:38:03      Z-Wave   Device: Node 6 Z-Wave Volts Set to 234,03 (234,03 Volts)
apr-29 22:37:57      Z-Wave   Device: 2. etg Stue Ovn Vindu, Switch Set to 255
apr-29 22:37:57      Device Control   Device: 2. etg Stue Ovn Vindu, Switch to On (255) by/from: CAPI Control Handler
apr-29 22:37:57      Device Control   Device: 2. etg Stue Set point VINDU to 5 °C (36,5) by/from: CAPI Control Handler
apr-29 22:37:55      Z-Wave   Device: 2. etg Stue Ovn TV, Switch Set to 255
apr-29 22:37:55      Device Control   Device: 2. etg Stue Ovn TV, Switch to On (255) by/from: CAPI Control Handler
apr-29 22:37:55      Device Control   Device: 2. etg Stue Set point TV to 5 °C (35) by/from: CAPI Control Handler
apr-29 22:36:55      Z-Wave   Device: 1. etg Gang Varmekabler, Switch Set to 255
apr-29 22:36:55      Device Control   Device: 1. etg Gang Varmekabler, Switch to On (255) by/from: CAPI Control Handler
apr-29 22:36:55      Device Control   Device: 1. etg Gang Set point VARMEKABLER to 5 °C (24,5) by/from: CAPI Control Handler
apr-29 22:36:51      Device Control   Device: 1. etg Gang Varmekabler, Switch to Off (0) by/from: CAPI Control Handler
apr-29 22:36:51      Device Control   Device: 1. etg Gang Set point VARMEKABLER to 5 °C (24) by/from: CAPI Control Handler
apr-29 22:36:41      Z-Wave   Device: 1. etg Gang Varmekabler, Switch Set to 0
apr-29 22:36:41      Device Control   Device: 1. etg Gang Varmekabler, Switch to Off (0) by/from: CAPI Control Handler
apr-29 22:36:41      Device Control   Device: 1. etg Gang Set point VARMEKABLER to 5 °C (19) by/from: CAPI Control Handler
apr-29 22:36:29      Event   Running script statement immediately: &hs.setDeviceValueByRef(145,hs.DeviceValueEx(9),True)
apr-29 22:36:29      Event   Event Trigger "Varmekontroll Gang_temp_RFXCOM"
apr-29 22:36:29      Event   Event Varmekontroll Gang_temp_RFXCOM triggered by the event page 'Run' button.
apr-29 22:35:32      Z-Wave   Device: Node 8 Z-Wave Volts Set to 231,65 (231,65 Volts)
apr-29 22:35:23      Z-Wave   Device: Node 6 Z-Wave Volts Set to 232,04 (232,04 Volts)
apr-29 22:35:16      Z-Wave   Device: 1. etg Gang Varmekabler, Switch Set to 255
apr-29 22:35:16      Device Control   Device: 1. etg Gang Varmekabler, Switch to On (255) by/from: CAPI Control Handler
apr-29 22:35:16      Device Control   Device: 2. etg Stue Ovn TV, Switch to Off (0) by/from: CAPI Control Handler
apr-29 22:35:16      Device Control   Device: 2. etg Stue Ovn Vindu, Switch to Off (0) by/from: CAPI Control Handler
apr-29 22:35:16      Device Control   Device: 1. etg Gang Varmekabler, Switch to On (255) by/from: CAPI Control Handler
apr-29 22:35:16      Device Control   Device: 1. etg Gang Set point VARMEKABLER to 5 °C (20) by/from: CAPI Control Handler
apr-29 22:34:20      Buienradar   Incorrect amount of data received from Buienradar: (since 29.04.2018 22:17:16)
apr-29 22:33:31      RFXCOM Error:   36 (AddVirtualDeviceParam) no VirDV1 present!
apr-29 22:31:46      RFXCOM Error:   36 (AddVirtualDeviceParam) no VirDV1 present!
apr-29 22:31:06      Z-Wave   Device: Node 6 Z-Wave Volts Set to 234,14 (234,14 Volts)
apr-29 22:30:59      Device Control   Device: 2. etg Stue Ovn Vindu, Switch to Off (0) by/from: CAPI Control Handler
apr-29 22:30:59      Device Control   Device: 2. etg Stue Ovn TV, Switch to Off (0) by/from: CAPI Control Handler
apr-29 22:30:59      Device Control   Device: 2. etg Stue Set point VINDU to 18 °C (18)
apr-29 22:30:59      Device Control   Device: 2. etg Stue Set point TV to 18 °C (18)
apr-29 22:30:59      Event   Event Trigger "Varmekontroll Varme-bryter senk"
apr-29 22:30:59      Device Control   Device: Hus Hus Varme, Virtual to Off (0) by/from: CAPI Control Handler
apr-29 22:30:34      Error   Exception in post processing (Events-0) of the Events page: Elementet er allerede lagt til. Nøkkel i katalog: varme-bryter senk. Nøkkelen som legges til: varme-bryter senk
apr-29 22:30:32      Z-Wave   Device: Node 8 Z-Wave Volts Set to 233,82 (233,82 Volts)
apr-29 22:30:22      Z-Wave   Device: Node 6 Z-Wave Volts Set to 234,6 (234,6 Volts)
apr-29 22:30:16      Device Control   Device: 2. etg Stue Ovn TV, Switch to Off (0) by/from: CAPI Control Handler
apr-29 22:30:16      Device Control   Device: 2. etg Stue Ovn Vindu, Switch to Off (0) by/from: CAPI Control Handler
apr-29 22:30:05      Z-Wave   Device: Node 6 Z-Wave Volts Set to 234,68 (234,68 Volts)
apr-29 22:29:58      Device Control   Device: 2. etg Stue Ovn Vindu, Switch to Off (0) by/from: CAPI Control Handler
apr-29 22:29:58      Device Control   Device: 2. etg Stue Ovn TV, Switch to Off (0) by/from: CAPI Control Handler
apr-29 22:29:58      Device Control   Device: 2. etg Stue Set point VINDU to 23 °C (23)
apr-29 22:29:58      Device Control   Device: 2. etg Stue Set point TV to 23 °C (23)
apr-29 22:29:58      Event   Event Trigger "Varmekontroll Varme-bryter senk"
apr-29 22:29:58      Device Control   Device: Hus Hus Varme, Virtual to On (100) by/from: CAPI Control Handler
apr-29 22:29:29      Device Control   Device: 2. etg Stue Ovn TV, Switch to Off (0) by/from: CAPI Control Handler
apr-29 22:29:29      Device Control   Device: 2. etg Stue Set point TV to 5 °C (18,5) by/from: CAPI Control Handler
apr-29 22:29:27      Z-Wave   Device: Node 6 Z-Wave Volts Set to 234,86 (234,86 Volts)
apr-29 22:29:21      Device Control   Device: 2. etg Stue Ovn Vindu, Switch to Off (0) by/from: CAPI Control Handler
apr-29 22:29:21      Device Control   Device: 2. etg Stue Set point VINDU to 5 °C (21,5) by/from: CAPI Control Handler
apr-29 22:27:22      Z-Wave   Device: Node 2 Z-Wave Luminance Set to 1 (Lux)
apr-29 22:26:12      Z-Wave   Device: Node 6 Z-Wave Volts Set to 233,08 (233,08 Volts)
apr-29 22:26:06      Device Control   Device: 2. etg Stue Ovn Vindu, Switch to Off (0) by/from: CAPI Control Handler
apr-29 22:26:06      Device Control   Device: 2. etg Stue Set point to 5 °C (23) by/from: CAPI Control Handler
apr-29 22:26:03      Device Control   Device: 2. etg Stue Ovn TV, Switch to Off (0) by/from: CAPI Control Handler
apr-29 22:26:03      Device Control   Device: 2. etg Stue Set point to 5 °C (23) by/from: CAPI Control Handler
apr-29 22:25:54      Z-Wave   Device: 2. etg Stue Ovn TV, Switch Set to 0
apr-29 22:25:53      Device Control   Device: 2. etg Stue Ovn TV, Switch to Off (0) by/from: CAPI Control Handler
apr-29 22:25:53      Device Control   Device: 2. etg Stue Set point to 5 °C (21,5) by/from: CAPI Control Handler
apr-29 22:25:39      Z-Wave   Device: 2. etg Stue Ovn TV, Switch Set to 255
apr-29 22:25:39      Device Control   Device: 2. etg Stue Ovn TV, Switch to On (255) by/from: CAPI Control Handler
apr-29 22:25:39      Device Control   Device: 2. etg Stue Set point to 5 °C (32,5) by/from: CAPI Control Handler
apr-29 22:25:32      Z-Wave   Device: Node 8 Z-Wave Volts Set to 232,83 (232,83 Volts)
apr-29 22:25:22      Z-Wave   Device: Node 6 Z-Wave Volts Set to 233,1 (233,1 Volts)
apr-29 22:25:19      Device Control   Device: 2. etg Stue Ovn TV, Switch to Off (0) by/from: CAPI Control Handler
apr-29 22:25:19      Device Control   Device: 2. etg Stue Set point to 5 °C (7,5) by/from: CAPI Control Handler
apr-29 22:25:16      Device Control   Device: 2. etg Stue Ovn TV, Switch to Off (0) by/from: CAPI Control Handler
apr-29 22:25:16      Device Control   Device: 2. etg Stue Ovn Vindu, Switch to Off (0) by/from: CAPI Control Handler
apr-29 22:25:14      Event   Running script statement immediately: &hs.setDeviceValueByRef(141,hs.DeviceValueEx(17),True)
apr-29 22:25:14      Event   Running script statement immediately: &hs.setDeviceValueByRef(124,hs.DeviceValueEx(17),True)
apr-29 22:25:14      Event   Event Trigger "Varmekontroll Stue_temp_RFXCOM"
apr-29 22:25:14      Event   Event Varmekontroll Stue_temp_RFXCOM triggered by the event page 'Run' button.
apr-29 22:24:59      Event   Running script statement immediately: &hs.setDeviceValueByRef(141,hs.DeviceValueEx(17),True)
apr-29 22:24:59      Event   Running script statement immediately: &hs.setDeviceValueByRef(124,hs.DeviceValueEx(17),True)
apr-29 22:24:59      Event   Event Trigger "Varmekontroll Stue_temp_RFXCOM"
apr-29 22:24:59      Event   Event Varmekontroll Stue_temp_RFXCOM triggered by the event page 'Run' button.
apr-29 22:22:53      RFXCOM Error:   36 (AddVirtualDeviceParam) no VirDV1 present!
apr-29 22:20:31      Z-Wave   Device: Node 8 Z-Wave Volts Set to 233,03 (233,03 Volts)
apr-29 22:20:22      Z-Wave   Device: Node 6 Z-Wave Volts Set to 233,13 (233,13 Volts)
apr-29 22:20:16      Device Control   Device: 2. etg Stue Ovn Vindu, Switch to Off (0) by/from: CAPI Control Handler
apr-29 22:19:16      Buienradar   Too many consecutive errors detected, error logging interval reduced to every 15 minutes...
apr-29 22:19:16      Buienradar   Incorrect amount of data received from Buienradar:
apr-29 22:18:46      Buienradar   Incorrect amount of data received from Buienradar:
apr-29 22:18:16      Buienradar   Incorrect amount of data received from Buienradar:
apr-29 22:18:14      Z-Wave   Device: Node 6 Z-Wave Volts Set to 232,26 (232,26 Volts)
apr-29 22:18:08      Z-Wave   Device: 2. etg Stue Ovn Vindu, Switch Set to 0
apr-29 22:18:08      Device Control   Device: 2. etg Stue Ovn Vindu, Switch to Off (0) by/from: CAPI Control Handler
apr-29 22:18:08      Device Control   Device: 2. etg Stue Set point to 5 °C (23,5) by/from: CAPI Control Handler
apr-29 22:18:00      Z-Wave   Device: Node 6 Z-Wave Volts Set to 233,7 (233,7 Volts)
apr-29 22:17:55      Z-Wave   Device: 2. etg Stue Ovn Vindu, Switch Set to 255
apr-29 22:17:54      Device Control   Device: 2. etg Stue Ovn Vindu, Switch to On (255) by/from: CAPI Control Handler
apr-29 22:17:54      Device Control   Device: 2. etg Stue Set point to 5 °C (27) by/from: CAPI Control Handler
apr-29 22:17:47      TTS   Speak ():Welcome to Home-Seer
apr-29 22:17:47      Z-Wave   Starting Z-Wave Polling for Network C9FECFB9...
apr-29 22:17:46      Buienradar   Incorrect amount of data received from Buienradar:
apr-29 22:17:21      Z-Wave   *******************************************************************************
apr-29 22:17:21      Z-Wave   STARTUP COMPLETE: All configured interfaces were successfully initialized.
apr-29 22:17:21      Z-Wave   *******************************************************************************
apr-29 22:17:20      Z-Wave   Aeotec Z-wave stick: ......................................................................
apr-29 22:17:20      Z-Wave   Aeotec Z-wave stick: .............................. FINISHED ..............................
apr-29 22:17:20      Z-Wave   Aeotec Z-wave stick: ......................................................................
apr-29 22:17:20      Z-Wave   Aeotec Z-wave stick is the SIS for the network.
apr-29 22:17:20      Z-Wave   Aeotec Z-wave stick There is a SUC/SIS in the network.
apr-29 22:17:20      Z-Wave   Aeotec Z-wave stick Controller is static lib.
apr-29 22:17:20      Z-Wave   Aeotec Z-wave stick Controller chip type is ZW050x.
apr-29 22:17:19      Z-Wave   The interface's security support has been set.
apr-29 22:17:19      Z-Wave   Aeotec Z-wave stick: Found 9 Z-Wave nodes in interface node ID 1 (Aeotec Z-wave stick)
apr-29 22:17:19      Z-Wave   Aeotec Z-wave stick: Z-Wave interface node ID: 1, Home ID: C9FECFB9
apr-29 22:17:19      Z-Wave   Aeotec Z-wave stick: Z-Wave Serial API version: 5
apr-29 22:17:19      Z-Wave   Aeotec Z-wave stick: Z-Wave services for the SECURITY COMMAND CLASS were successfully started.
apr-29 22:17:19      Z-Wave   Aeotec Z-wave stick: Controller firmware version: 1.0
apr-29 22:17:19      Z-Wave   Aeotec Z-wave stick: Controller Manufacturer: Aeon Labs, ID=0x5A, Type=0x1
apr-29 22:17:17      Z-Wave   Aeotec Z-wave stick: Getting node information from controller...
apr-29 22:17:17      Z-Wave   Aeotec Z-wave stick: The Z-Wave API Execution Thread was Started or Restarted.
apr-29 22:17:17      Z-Wave   Aeotec Z-wave stick: The Z-Wave Command Execution Thread was Started or Restarted.
apr-29 22:17:17      Z-Wave   465 Simple AV Control Command Class Control Commands have been loaded successfully.
apr-29 22:17:17      Z-Wave   Aeotec Z-wave stick: ----------------------------------------------------------------------
apr-29 22:17:17      Z-Wave   Initializing Z-Wave interface Aeotec Z-wave stick (Aeon Labs Aeotec Z-Stick) on COM5
apr-29 22:17:17      Z-Wave   Aeotec Z-wave stick: ----------------------------------------------------------------------
apr-29 22:17:17      Z-Wave   Aeotec Z-wave stick: ======================================================================
apr-29 22:17:17      Z-Wave   0 event triggers were loaded from HomeSeer.
apr-29 22:17:17      Z-Wave   0 event actions were loaded from HomeSeer.
apr-29 22:17:17      Starting Plug-In   Plugin Z-Wave started successfully in 505 milliseconds
apr-29 22:17:17      Info   System connected to MyHS Service successfully with license ID 112304.
apr-29 22:17:16      Z-Wave   47 total Z-Wave Data Objects loaded.
apr-29 22:17:16      Z-Wave   Network C9FECFB9 has 47 device data elements.
apr-29 22:17:16      Z-Wave   1 Networks were restored from the data in the database... Building data connections.
apr-29 22:17:16      Z-Wave   Loading Z-Wave Data Objects...
apr-29 22:17:16      Z-Wave   1 total Z-Wave Network Objects loaded.
apr-29 22:17:16      Z-Wave   Loading Z-Wave Network Objects...
apr-29 22:17:16      Info   System connected to MyHS Service, waiting for acknowledge...
apr-29 22:17:16      Z-Wave   Database: Opening (Mode=Read Only) up HomeSeer database C:\Program Files (x86)\HomeSeer HS3\Data\Z-Wave\Z-Wave2.db
apr-29 22:17:16      Startup   Start up complete.
apr-29 22:17:16      Startup   HSSentry is disabled in Setup, sentry will not be started.
apr-29 22:17:16      Startup   (Startup.vb script) No speaker clients detected, waiting up to 30 seconds for any to connect...
apr-29 22:17:16      Startup   (Startup.vb script) Scripting is OK and is now running Startup.vb
apr-29 22:17:16      Z-Wave   InitIO called, plug-in version 3.0.1.190 is being initialized...
apr-29 22:17:16      Startup   Starting Event Scheduler...
apr-29 22:17:16      Starting Plug-In   Initializing plugin Z-Wave ...
apr-29 22:17:16      Starting Plug-In   Plugin EasyTrigger started successfully in 104 milliseconds
apr-29 22:17:16      EasyTrigger   INFO Found 0 device group value triggers
apr-29 22:17:16      EasyTrigger   INFO Refreshing list of device group value triggers to monitor
apr-29 22:17:16      EasyTrigger   INFO Found 0 random triggers
apr-29 22:17:16      EasyTrigger   INFO Refreshing list of random triggers to monitor
apr-29 22:17:16      EasyTrigger   INFO Found 0 schedule triggers
apr-29 22:17:16      EasyTrigger   INFO Refreshing list of schedule triggers to monitor
apr-29 22:17:16      EasyTrigger   INFO Found 0 device's value conditions that need monitoring
apr-29 22:17:16      EasyTrigger   INFO Found 0 device's value triggers
apr-29 22:17:16      EasyTrigger   INFO Refreshing list of device's value triggers to monitor
apr-29 22:17:16      EasyTrigger   INFO Found 0 device's string triggers
apr-29 22:17:16      EasyTrigger   INFO Refreshing list of device's string triggers to monitor
apr-29 22:17:16      EasyTrigger   INFO EasyTrigger version 3.0.0.46
apr-29 22:17:16      Starting Plug-In   Initializing plugin EasyTrigger ...
apr-29 22:17:16      Starting Plug-In   Plugin RFXCOM started successfully in 198 milliseconds
apr-29 22:17:16      RFXCOM   36 (InitIO) RFXCOM version is:30.0.0.36
apr-29 22:17:16      Startup   Running the startup script Startup.vb
apr-29 22:17:16      Startup   Starting Find service...
apr-29 22:17:16      Startup   Updater services starting...
apr-29 22:17:16      Web Server   Web Server authorized local login successful from: 192.168.1.6 User: Henrik
apr-29 22:17:16      Starting Plug-In   Initializing plugin RFXCOM ...
apr-29 22:17:16      Starting Plug-In   Plugin Buienradar started successfully in 447 milliseconds
apr-29 22:17:16      Buienradar   Incorrect amount of data received from Buienradar:
apr-29 22:17:16      Database   Opening (Mode=Read/Write) up HomeSeer Energy database C:\Program Files (x86)\HomeSeer HS3\Data\Energy\Energy.hsd
apr-29 22:17:16      Speech   Listening for remote speaker connections on port 10401
apr-29 22:17:16      Startup   Initializing Speaker Client Interface
apr-29 22:17:16      Startup   Start automation engine...
apr-29 22:17:15      Buienradar   Initializing plugin Buienradar version 3.0.0.21
apr-29 22:17:15      Starting Plug-In   Initializing plugin Buienradar ...
apr-29 22:17:15      Startup   Creating ASP.NET application host...
apr-29 22:17:15      Info   Plugin Z-Wave has connected. IP:127.0.0.1:49429
apr-29 22:17:15      Web Server   Web Server started on port 80
apr-29 22:17:15      Web Server   Local IP address (subnet) is: 192.168.1.152 (255.255.255.0)
apr-29 22:17:15      Info   Plugin RFXCOM has connected. IP:127.0.0.1:49427
apr-29 22:17:15      Info   Plugin Buienradar has connected. IP:127.0.0.1:49423
apr-29 22:17:15      Info   Plugin EasyTrigger has connected. IP:127.0.0.1:49424
apr-29 22:17:15      Startup   HStouch server started, waiting for clients to connect.
apr-29 22:17:15      HSTouch Server   Server started on port 10200
apr-29 22:17:15      Plug-In   Finished initializing plug-in Z-Wave
apr-29 22:17:15      Plug-In   Finished initializing plug-in EasyTrigger
apr-29 22:17:15      Plug-In   Interface EasyTrigger is running as a trial, 30 days remaining.
apr-29 22:17:15      Plug-In   Finished initializing plug-in RFXCOM
apr-29 22:17:15      Plug-In   Interface RFXCOM is running as a trial, 30 days remaining.
apr-29 22:17:15      Plug-In   Finished initializing plug-in Buienradar
apr-29 22:17:15      Startup   Initializing Plug-Ins
apr-29 22:17:15      Plug-In   Found plug-in: Z-Wave, version: 3.0.1.190
apr-29 22:17:15      Plug-In   Found plug-in: RFXCOM, version: 30.0.0.36
apr-29 22:17:15      Plug-In   Found plug-in: HAI OmniStat, version: 3.0.1.4
apr-29 22:17:15      Plug-In   Found plug-in: EasyTrigger, version: 3.0.0.46
apr-29 22:17:15      Plug-In   Found plug-in: Buienradar, version: 3.0.0.21
apr-29 22:17:15      Startup   Checking for available plug-ins
apr-29 22:17:15      Info   Remote plug-in API interface started on port 10400
apr-29 22:17:15      Startup   This version of HomeSeer is registered as a HS3PRO version.
apr-29 22:17:15      Startup   Creating Speaker Client Interface Object...
apr-29 22:17:15      Startup   HomeSeer version is: 3.0.0.435
apr-29 22:17:15      Load Config   Loading TIMERS...
apr-29 22:17:15      Load Config   Loading COUNTERS...
apr-29 22:17:15      Load Config   5 total events loaded.
apr-29 22:17:15      Load Config   Loading Events...
apr-29 22:17:15      Load Config   Loading Event Groups...
apr-29 22:17:15      Load Config   60 total devices loaded.
apr-29 22:17:15      Database   Loading Devices...
apr-29 22:17:15      Database   Opening (Mode=Read Only) up HomeSeer database C:\Program Files (x86)\HomeSeer HS3\Data\HomeSeerData.hsd
apr-29 22:17:15      Startup   Loading configuration file ...
apr-29 22:17:15      Startup   Database SAVE process started.
apr-29 22:17:15      Startup   Local voice recognition class started.
apr-29 22:17:15      Startup   HSPhone external interface class started.
apr-29 22:17:15      Startup   Plug-In Interface class started.
apr-29 22:17:15      Startup   E-Mail RECEIVE class started.
apr-29 22:17:15      Startup   E-Mail SEND class started.
apr-29 22:17:15      Startup   Web server class started.
apr-29 22:17:15      Startup   Application interface class started.
apr-29 22:17:15      Startup   COM port classes started.
apr-29 22:17:15      Startup   Creating Class Objects...
apr-29 22:17:15      Startup
apr-29 22:17:15      Startup   ********************************************************************************
apr-29 22:17:15      Startup   HomeSeer version 3.0.0.435 Edition: HS3 Pro Starting Now
apr-29 22:17:15      Startup   ********************************************************************************
apr-29 22:17:15      Startup
apr-29 22:17:15      Startup   Settings Loaded.

Endret 30. april 2018 av jhenrikb

Logg inn

script SCRIPT: VirtualThermostat.vb (beta) - En virtuell termostat med programfunksjon

Anbefalte innlegg

Lenke til kommentar

Del på andre sider

Mest aktive i denne tråden

Populære dager

Mest aktive i denne tråden

Populære dager

Populære innlegg

Moskus

Chris

Moskus

Postede bilder

Lenke til kommentar

Del på andre sider

Lenke til kommentar

Del på andre sider

Lenke til kommentar

Del på andre sider

Lenke til kommentar

Del på andre sider

Lenke til kommentar

Del på andre sider

Lenke til kommentar

Del på andre sider

Lenke til kommentar

Del på andre sider

Lenke til kommentar

Del på andre sider

Lenke til kommentar

Del på andre sider

Lenke til kommentar

Del på andre sider

Lenke til kommentar

Del på andre sider

Lenke til kommentar

Del på andre sider

Lenke til kommentar

Del på andre sider

Lenke til kommentar

Del på andre sider

Lenke til kommentar

Del på andre sider

Lenke til kommentar

Del på andre sider

Lenke til kommentar

Del på andre sider

Lenke til kommentar

Del på andre sider

Lenke til kommentar

Del på andre sider

Lenke til kommentar

Del på andre sider

Lenke til kommentar

Del på andre sider

Lenke til kommentar

Del på andre sider

Lenke til kommentar

Del på andre sider

Lenke til kommentar

Del på andre sider

Bli med i samtalen

Lignende innhold

Viktig informasjon