Mill ovn og UniFi og viktig info i Automasjonskaféen Skrevet 9. november 2023 Hello, I have mill wifi generation3. So far I've found out that: gpio 19 is i2c sda gpio 18 is i2c scl GPIO 4 and GPIO 17 must be turned on together for the heater to heat GPIO 32 is an NTC temperature sensor I have a problem with calibrating the NTC sensor. Any ideas? Sitat - platform: ntc sensor: resistance_sensor unit_of_measurement: "°C" accuracy_decimals: 1 icon: "mdi:thermometer" calibration: b_constant: 5950 reference_temperature: 25°C reference_resistance: 10kOhm name: NTC Temperature - platform: resistance id: resistance_sensor sensor: source_sensor configuration: DOWNSTREAM resistor: 10kOhm #reference_voltage: 3.6V name: Resistance Sensor - platform: adc id: source_sensor unit_of_measurement: "°C" accuracy_decimals: 1 pin: A4 icon: mdi:thermometer filters: - multiply: 3.0 2
Mill ovn og UniFi og viktig info
i Automasjonskaféen
Skrevet
Hello, I have mill wifi generation3. So far I've found out that:
gpio 19 is i2c sda
gpio 18 is i2c scl
GPIO 4 and GPIO 17 must be turned on together for the heater to heat
GPIO 32 is an NTC temperature sensor
I have a problem with calibrating the NTC sensor. Any ideas?