jhenrikb
-
Innlegg
51 -
Ble med
-
Besøkte siden sist
-
Dager vunnet
1
Innholdstype
Profiler
Forum
Blogger
Nedlastninger
Artikler
Regler
Hendelser
Galleri
Store
Innlegg skrevet av jhenrikb
-
-
20 minutter siden, ZoRaC skrev:
Flere opplever samme problem med den dimmeren:
Tror jeg ville prøvde f.eks Fibaro Dimmer 2 i stedet.
Her står det forresten at det er en «leading edge»: https://www.bauhaus.se/mottagare-nexa-ad-146-z-wave-inbyggnadsdimmer.html
mens det på bildet ditt står at det trengs «trailing edge».
Ah!
Kanskje det som gjør problemet da.
Det som er artig er at når jeg dimmer Stue lyset, så flimrer det i trappelyset. Hvis alle lysa står på samme % dimming går det fint.
Men hvis feks stuelyset er 20% og trappelyset 100% blir det full party mode.
-
redigert tråden
-
Ah smart!
Må testes ut takk takk!
-
-
Hei
Jeg har 2 stk Hank 4 key scene controller (vedlegg dokumentasjon).
Disse funka plettfritt i domoticz som laget 1 switch ut av hver knapp på bryteren, samt en bråta med andre devicer jeg ikke brukte. Gikk også ganske lett å binde en knapp til en scene eller tilfeldig av/på device.
Men i Homeseer så får jeg ikke Z-wave scener til å fungere. Det kommer ikke opp noen devicer i drop-down listen.
Videre på Hank scene-kontrolleren får jeg bare valgt fysiske noder som jeg kan styre. Dette var jo litt dumt fordi jeg vil styre virtuelle knapper som trigger eventer som Natt, Kino-mode osv.
Er det noe mulighet for å programmere de i homeseer?
Håper det er håp
mvh
-
Jeg er tjukk i huet ikke kødd. Smarte på mange ting, men utrolig dum noen ganger på sånne "rett frem" ting.
-
På 29.4.2018 den 20.16, ZoRaC skrev:
Jeg ville lastet ned plugin SDJ-VStat.
Fiks ferdig virtuell termostat med mange muligheter!
Ellers er svaret på muligheten for å sjekke om en deviceverdi er mindre enn en annen deviceverdi, plugin EasyTrigger.
Kult den var jo gratis også
takk
evt, vet du hva toleransen er for switch av/på?
Feks vi target temp er 22°C, skrur den seg av da, så på igjen på 21.9°C?
jeg programerte termostaten i Domoticz til +- 0.2°C for å hindre devicene i å skru seg av og på for mange ganger. Da ble effektiv temp range 0.4°C.
Eller var det jo klikkefest i bryterne mine.
-
1 time siden, Moskus skrev:
Tror uansett du burde sjekket at du ikke har laget en haug med termostater som du ikke ser, og følgelig kan skape problemer for deg senere...
Dessuten hadde du jo hjulpet meg hvis du så en feilmelding i loggen.
Kan ikke finne noen termostater som er ekstra. Ingen ting i device list, ellers vet jeg ikke vhordan jeg skal lete etter devicer.
Ser stort sett ut som det bare var Buienradar som ikke fungerer helt for meg.
Spoilerapr-30 16:10:29 Z-Wave Device: Node 6 Z-Wave Volts Set to 232,94 (232,94 Volts)
apr-30 16:10:23 Device Control Device: 1. etg Gang Varmekabler, Switch to Off (0) by/from: CAPI Control Handler
apr-30 16:10:23 Device Control Device: 2. etg Stue Ovn TV, Switch to Off (0) by/from: CAPI Control Handler
apr-30 16:10:23 Device Control Device: 2. etg Stue Ovn Vindu, Switch to Off (0) by/from: CAPI Control Handler
apr-30 16:10:20 Z-Wave Device: Node 8 Z-Wave Volts Set to 232,52 (232,52 Volts)
apr-30 16:10:19 Z-Wave Device: Node 8 Z-Wave Watts Set to 6,1 (6,1 Watts)
apr-30 16:09:40 Z-Wave Device: Node 3 Z-Wave Luminance Set to 31 (Lux)
apr-30 16:09:39 Z-Wave Device: 2. etg Stue Luftfuktighet, Sensor Set to 27 (%)
apr-30 16:07:28 Info Plugin Buienradar with instance: has disconnected
apr-30 16:07:28 Plug-In Shutting down Plug-In: Buienradar
apr-30 16:05:29 Z-Wave Device: Node 6 Z-Wave Volts Set to 229,97 (229,97 Volts)
apr-30 16:05:23 Device Control Device: 1. etg Gang Varmekabler, Switch to Off (0) by/from: CAPI Control Handler
apr-30 16:05:23 Device Control Device: 2. etg Stue Ovn TV, Switch to Off (0) by/from: CAPI Control Handler
apr-30 16:05:23 Device Control Device: 2. etg Stue Ovn Vindu, Switch to Off (0) by/from: CAPI Control Handler
apr-30 16:05:19 Z-Wave Device: Node 8 Z-Wave Volts Set to 229,59 (229,59 Volts)
apr-30 16:05:17 Z-Wave Device: Node 8 Z-Wave Watts Set to 6,02 (6,02 Watts)
apr-30 16:03:03 Z-Wave Device: Node 8 Z-Wave Volts Set to 231,33 (231,33 Volts)
apr-30 16:03:02 Z-Wave Device: Node 8 Z-Wave Watts Set to 6,1 (6,1 Watts)
apr-30 16:00:29 Z-Wave Device: Node 6 Z-Wave Volts Set to 231,54 (231,54 Volts)
apr-30 16:00:23 Device Control Device: 1. etg Gang Varmekabler, Switch to Off (0) by/from: CAPI Control Handler
apr-30 16:00:23 Device Control Device: 2. etg Stue Ovn TV, Switch to Off (0) by/from: CAPI Control Handler
apr-30 16:00:23 Device Control Device: 2. etg Stue Ovn Vindu, Switch to Off (0) by/from: CAPI Control Handler
apr-30 15:58:04 Z-Wave Device: Node 8 Z-Wave Volts Set to 230,39 (230,39 Volts)
apr-30 15:58:02 Z-Wave Device: Node 8 Z-Wave Watts Set to 6,2 (6,2 Watts)
apr-30 15:55:47 Buienradar Incorrect amount of data received from Buienradar: (since 29.04.2018 22:17:16)
apr-30 15:55:29 Z-Wave Device: Node 6 Z-Wave Volts Set to 231,22 (231,22 Volts)
apr-30 15:55:23 Device Control Device: 1. etg Gang Varmekabler, Switch to Off (0) by/from: CAPI Control Handler
apr-30 15:55:23 Device Control Device: 2. etg Stue Ovn TV, Switch to Off (0) by/from: CAPI Control Handler
apr-30 15:55:23 Device Control Device: 2. etg Stue Ovn Vindu, Switch to Off (0) by/from: CAPI Control Handler
apr-30 15:53:04 Z-Wave Device: Node 8 Z-Wave Volts Set to 230,21 (230,21 Volts)
apr-30 15:53:02 Z-Wave Device: Node 8 Z-Wave Watts Set to 6,19 (6,19 Watts)
apr-30 15:50:29 Z-Wave Device: Node 6 Z-Wave Volts Set to 230,15 (230,15 Volts)
apr-30 15:50:23 Device Control Device: 1. etg Gang Varmekabler, Switch to Off (0) by/from: CAPI Control Handler
apr-30 15:50:23 Device Control Device: 2. etg Stue Ovn TV, Switch to Off (0) by/from: CAPI Control Handler
apr-30 15:50:23 Device Control Device: 2. etg Stue Ovn Vindu, Switch to Off (0) by/from: CAPI Control Handler
apr-30 15:49:41 Z-Wave Device: Node 8 Z-Wave Amperes Set to 0,04 (0,04 Amperes)
apr-30 15:49:41 Z-Wave Device: Node 8 Z-Wave Volts Set to 229,43 (229,43 Volts)
apr-30 15:49:39 Z-Wave Device: Node 8 Z-Wave Watts Set to 6,16 (6,16 Watts)
apr-30 15:49:35 Z-Wave Device: Node 8 Z-Wave Amperes Set to 0,05 (0,05 Amperes)
apr-30 15:49:35 Z-Wave Device: Node 8 Z-Wave Volts Set to 229,8 (229,8 Volts)
apr-30 15:49:33 Z-Wave Device: Node 8 Z-Wave Watts Set to 6,24 (6,24 Watts)
apr-30 15:48:53 Z-Wave Device: Node 8 Z-Wave Volts Set to 229,58 (229,58 Volts)
apr-30 15:48:51 Z-Wave Device: Node 8 Z-Wave Watts Set to 6,19 (6,19 Watts)
apr-30 15:48:36 Z-Wave Device: Node 8 Z-Wave Volts Set to 229,66 (229,66 Volts)
apr-30 15:48:34 Z-Wave Device: Node 8 Z-Wave Watts Set to 6,22 (6,22 Watts)
apr-30 15:48:10 Z-Wave Device: Node 8 Z-Wave Amperes Set to 0,04 (0,04 Amperes)
apr-30 15:48:10 Z-Wave Device: Node 8 Z-Wave Volts Set to 228,87 (228,87 Volts)
apr-30 15:48:08 Z-Wave Device: Node 8 Z-Wave Watts Set to 6,25 (6,25 Watts)
apr-30 15:48:04 Z-Wave Device: Node 8 Z-Wave Amperes Set to 0,05 (0,05 Amperes)
apr-30 15:48:04 Z-Wave Device: Node 8 Z-Wave Volts Set to 229,81 (229,81 Volts)
apr-30 15:48:02 Z-Wave Device: Node 8 Z-Wave Watts Set to 6,24 (6,24 Watts)
apr-30 15:47:12 Z-Wave Device: Node 8 Z-Wave Amperes Set to 0,04 (0,04 Amperes)
apr-30 15:47:12 Z-Wave Device: Node 8 Z-Wave Volts Set to 229,51 (229,51 Volts)
apr-30 15:47:10 Z-Wave Device: Node 8 Z-Wave Watts Set to 6,26 (6,26 Watts)
apr-30 15:47:06 Z-Wave Device: Node 8 Z-Wave Volts Set to 230,14 (230,14 Volts)
apr-30 15:46:53 Z-Wave Device: Node 8 Z-Wave Volts Set to 229,89 (229,89 Volts)
apr-30 15:46:51 Z-Wave Device: Node 8 Z-Wave Watts Set to 6,27 (6,27 Watts)
apr-30 15:46:19 Z-Wave Device: Node 8 Z-Wave Amperes Set to 0,05 (0,05 Amperes)
apr-30 15:46:18 Z-Wave Device: Node 8 Z-Wave Volts Set to 229,61 (229,61 Volts)
apr-30 15:46:17 Z-Wave Device: Node 8 Z-Wave Watts Set to 6,33 (6,33 Watts)
apr-30 15:45:57 Z-Wave Device: Node 8 Z-Wave Amperes Set to 0,04 (0,04 Amperes)
apr-30 15:45:56 Z-Wave Device: Node 8 Z-Wave Volts Set to 230,02 (230,02 Volts)
apr-30 15:45:55 Z-Wave Device: Node 8 Z-Wave Watts Set to 6,24 (6,24 Watts)
apr-30 15:45:49 Z-Wave Device: Node 8 Z-Wave Amperes Set to 0,05 (0,05 Amperes)
apr-30 15:45:49 Z-Wave Device: Node 8 Z-Wave Volts Set to 230,12 (230,12 Volts)
apr-30 15:45:47 Z-Wave Device: Node 8 Z-Wave Watts Set to 6,21 (6,21 Watts)
apr-30 15:45:29 Z-Wave Device: Node 6 Z-Wave Volts Set to 231,42 (231,42 Volts)
apr-30 15:45:27 Z-Wave Device: Node 8 Z-Wave Volts Set to 230,76 (230,76 Volts)
apr-30 15:45:25 Z-Wave Device: Node 8 Z-Wave Watts Set to 6,22 (6,22 Watts)
apr-30 15:45:23 Device Control Device: 1. etg Gang Varmekabler, Switch to Off (0) by/from: CAPI Control Handler
apr-30 15:45:23 Device Control Device: 2. etg Stue Ovn TV, Switch to Off (0) by/from: CAPI Control Handler
apr-30 15:45:23 Device Control Device: 2. etg Stue Ovn Vindu, Switch to Off (0) by/from: CAPI Control Handler
apr-30 15:45:15 Z-Wave Device: Node 8 Z-Wave Volts Set to 230,8 (230,8 Volts)
apr-30 15:44:45 Z-Wave Device: Node 8 Z-Wave Amperes Set to 0,04 (0,04 Amperes)
apr-30 15:44:45 Z-Wave Device: Node 8 Z-Wave Volts Set to 230,62 (230,62 Volts)
apr-30 15:44:43 Z-Wave Device: Node 8 Z-Wave Watts Set to 6,2 (6,2 Watts)
apr-30 15:44:30 Z-Wave Device: Node 8 Z-Wave Amperes Set to 0,05 (0,05 Amperes)
apr-30 15:44:29 Z-Wave Device: Node 8 Z-Wave Volts Set to 230,33 (230,33 Volts)
apr-30 15:44:28 Z-Wave Device: Node 8 Z-Wave Watts Set to 6,32 (6,32 Watts)
apr-30 15:44:14 Z-Wave Device: Node 8 Z-Wave Amperes Set to 0,04 (0,04 Amperes)
apr-30 15:44:13 Z-Wave Device: Node 8 Z-Wave Volts Set to 230,65 (230,65 Volts)
apr-30 15:44:12 Z-Wave Device: Node 8 Z-Wave Watts Set to 6,3 (6,3 Watts)
apr-30 15:43:58 Z-Wave Device: Node 8 Z-Wave Amperes Set to 0,05 (0,05 Amperes)
apr-30 15:43:57 Z-Wave Device: Node 8 Z-Wave Volts Set to 230,88 (230,88 Volts)
apr-30 15:43:56 Z-Wave Device: Node 8 Z-Wave Watts Set to 6,32 (6,32 Watts)
apr-30 15:43:45 Z-Wave Device: Node 8 Z-Wave Volts Set to 229,78 (229,78 Volts)
apr-30 15:43:44 Z-Wave Device: Node 8 Z-Wave Watts Set to 6,29 (6,29 Watts)
apr-30 15:43:31 Z-Wave Device: Node 8 Z-Wave Amperes Set to 0,04 (0,04 Amperes)
apr-30 15:43:30 Z-Wave Device: Node 8 Z-Wave Volts Set to 230,77 (230,77 Volts)
apr-30 15:43:29 Z-Wave Device: Node 8 Z-Wave Watts Set to 6,22 (6,22 Watts)
apr-30 15:43:24 Z-Wave Device: Node 8 Z-Wave Amperes Set to 0,05 (0,05 Amperes)
apr-30 15:43:23 Z-Wave Device: Node 8 Z-Wave Volts Set to 230,94 (230,94 Volts)
apr-30 15:43:22 Z-Wave Device: Node 8 Z-Wave Watts Set to 6,32 (6,32 Watts)
apr-30 15:43:11 Z-Wave Device: Node 8 Z-Wave Volts Set to 230,21 (230,21 Volts)
apr-30 15:43:10 Z-Wave Device: Node 8 Z-Wave Watts Set to 6,29 (6,29 Watts)
apr-30 15:43:03 Z-Wave Device: Node 8 Z-Wave Amperes Set to 0,04 (0,04 Amperes)
apr-30 15:43:01 Z-Wave Device: Node 8 Z-Wave Watts Set to 6,3 (6,3 Watts)
apr-30 15:42:51 Z-Wave Device: Node 8 Z-Wave Amperes Set to 0,05 (0,05 Amperes)
apr-30 15:42:51 Z-Wave Device: Node 8 Z-Wave Volts Set to 231,02 (231,02 Volts)
apr-30 15:42:49 Z-Wave Device: Node 8 Z-Wave Watts Set to 6,33 (6,33 Watts)
apr-30 15:42:34 Z-Wave Device: Node 8 Z-Wave Amperes Set to 0,04 (0,04 Amperes)
apr-30 15:42:33 Z-Wave Device: Node 8 Z-Wave Volts Set to 231,21 (231,21 Volts)
apr-30 15:42:32 Z-Wave Device: Node 8 Z-Wave Watts Set to 6,34 (6,34 Watts)
apr-30 15:42:12 Z-Wave Device: Node 8 Z-Wave Amperes Set to 0,05 (0,05 Amperes)
apr-30 15:42:11 Z-Wave Device: Node 8 Z-Wave Volts Set to 230,96 (230,96 Volts)
apr-30 15:42:10 Z-Wave Device: Node 8 Z-Wave Watts Set to 6,41 (6,41 Watts)
apr-30 15:41:45 Z-Wave Device: Node 8 Z-Wave Volts Set to 232,16 (232,16 Volts)
apr-30 15:41:43 Z-Wave Device: Node 8 Z-Wave Watts Set to 6,33 (6,33 Watts)
apr-30 15:41:33 Z-Wave Device: Node 6 Z-Wave Volts Set to 232,83 (232,83 Volts)
apr-30 15:41:32 Z-Wave Device: Node 8 Z-Wave Volts Set to 233,13 (233,13 Volts)
apr-30 15:41:30 Z-Wave Device: Node 8 Z-Wave Watts Set to 6,32 (6,32 Watts)
apr-30 15:41:26 Z-Wave Device: 1. etg Gang Taklys, Dimmer Set to 50
apr-30 15:41:26 Device Control Device: 1. etg Gang Varmekabler, Switch to Off (0) by/from: CAPI Control Handler
apr-30 15:41:26 Device Control Device: 2. etg Stue Ovn Vindu, Switch to Off (0) by/from: CAPI Control Handler
apr-30 15:41:26 Device Control Device: 2. etg Stue Ovn TV, Switch to Off (0) by/from: CAPI Control Handler
apr-30 15:41:26 Device Control Device: 1. etg Gang Set point VARMEKABLER to 23 °C (23)
apr-30 15:41:26 Device Control Device: 2. etg Stue Set point VINDU to 23 °C (23)
apr-30 15:41:26 Device Control Device: 2. etg Stue Set point TV to 23 °C (23)
apr-30 15:41:26 Device Control Device: Hus Hus Borte, Virtual to Off (0)
apr-30 15:41:26 Device Control Device: 1. etg Gang Taklys, Dimmer to Dim 50% (50)
apr-30 15:41:26 Event Event Trigger "Varmekontroll Varme-bryter hev"
apr-30 15:41:26 Device Control Device: Hus Hus Varme, Virtual to On (100)
apr-30 15:41:26 Device Control Device: Hus Hus Natt Alt, Virtual to Off (0)
apr-30 15:41:26 Device Control Device: Hus Hus Hovedbryter, Virtuel to On (100)
apr-30 15:41:26 Device Control Device: Hus Hus Borte, Virtual to Off (0)
apr-30 15:41:26 Event Event Trigger "Hus Hjemme"
apr-30 15:41:26 Device Control Device: Hus Hus Hjemme, Virtual to On (100) by/from: CAPI Control Handler
apr-30 15:41:26 Device Control Device: 2. etg Stue Taklys spisebord, Switch to On (255) by/from: CAPI Control Handler
apr-30 15:41:20 Z-Wave Device: Node 6 Z-Wave Volts Set to 233 (233 Volts)
apr-30 15:41:13 Z-Wave Error Failed sending Z-Wave command to device: 2. etg Stue Taklys spisebord, Switch
apr-30 15:41:08 Z-Wave Device: 1. etg Gang Taklys, Dimmer Set to 0
apr-30 15:41:08 Device Control Device: 1. etg Gang Varmekabler, Switch to Off (0) by/from: CAPI Control Handler
apr-30 15:41:08 Device Control Device: 2. etg Stue Ovn Vindu, Switch to Off (0) by/from: CAPI Control Handler
apr-30 15:41:08 Device Control Device: 2. etg Stue Ovn TV, Switch to Off (0) by/from: CAPI Control Handler
apr-30 15:41:08 Device Control Device: 1. etg Gang Set point VARMEKABLER to 18 °C (18)
apr-30 15:41:08 Device Control Device: 2. etg Stue Set point VINDU to 18 °C (18)
apr-30 15:41:08 Device Control Device: 2. etg Stue Set point TV to 18 °C (18)
apr-30 15:41:08 Event Event Trigger "Varmekontroll Varme-bryter senk"
apr-30 15:41:08 Device Control Device: 2. etg Stue Taklys spisebord, Switch to Off (0)
apr-30 15:41:08 Device Control Device: Hus Hus Varme, Virtual to Off (0)
apr-30 15:41:08 Device Control Device: 1. etg Gang Taklys, Dimmer to Off (0)
apr-30 15:41:08 Event Event Trigger "Hus Natt alt"
apr-30 15:41:08 Device Control Device: Hus Hus Natt Alt, Virtual to On (100) by/from: CAPI Control Handler
apr-30 15:40:55 Z-Wave Error Failed sending Z-Wave command to device: 2. etg Stue Taklys spisebord, Switch
apr-30 15:40:50 Device Control Device: 2. etg Stue Taklys spisebord, Switch to On (255) by/from: CAPI Control Handler
apr-30 15:40:44 Buienradar Incorrect amount of data received from Buienradar: (since 29.04.2018 22:17:16)
apr-30 15:40:34 Z-Wave Error Failed sending Z-Wave command to device: 2. etg Stue Taklys spisebord, Switch
apr-30 15:40:29 Z-Wave Device: Node 6 Z-Wave Volts Set to 231,67 (231,67 Volts)
apr-30 15:40:28 Device Control Device: 2. etg Stue Taklys spisebord, Switch to On (255) by/from: CAPI Control Handler
apr-30 15:40:28 Device Control Device: Hus Hus Borte, Virtual to Off (0)
apr-30 15:40:28 Device Control Device: 1. etg Gang Taklys, Dimmer to Dim 50% (50)
apr-30 15:40:28 Device Control Device: Hus Hus Varme, Virtual to On (100)
apr-30 15:40:28 Device Control Device: Hus Hus Natt Alt, Virtual to Off (0)
apr-30 15:40:28 Device Control Device: Hus Hus Hovedbryter, Virtuel to On (100)
apr-30 15:40:28 Device Control Device: Hus Hus Borte, Virtual to Off (0)
apr-30 15:40:28 Event Event Trigger "Hus Hjemme"
apr-30 15:40:28 Device Control Device: Hus Hus Hjemme, Virtual to On (100) by/from: CAPI Control Handler
apr-30 15:40:23 Device Control Device: 1. etg Gang Varmekabler, Switch to Off (0) by/from: CAPI Control Handler
apr-30 15:40:23 Device Control Device: 2. etg Stue Ovn TV, Switch to Off (0) by/from: CAPI Control Handler
apr-30 15:40:23 Device Control Device: 2. etg Stue Ovn Vindu, Switch to Off (0) by/from: CAPI Control Handler
apr-30 15:38:43 Z-Wave Device: Node 2 Z-Wave Home Security Set to NOTIFICATION for type Home Security, Event: No Event
apr-30 15:38:43 Z-Wave Device: 1. etg Gang Motion, Sensor Set to Off/Closed/No Motion
apr-30 15:37:34 Z-Wave Device: Node 2 Z-Wave Home Security Set to NOTIFICATION for type Home Security, Event: Motion Detected
apr-30 15:37:34 Z-Wave Device: 1. etg Gang Motion, Sensor Set to On/Open/Motion
apr-30 15:37:23 Z-Wave Device: 1. etg Gang Inngangsdør, Sensor Set to Off/Closed/No Motion
apr-30 15:37:23 Z-Wave Device: 1. etg Gang Inngangsdør, Notification Set to NOTIFICATION for type Access Control Notification, Event: Closed
apr-30 15:36:20 Z-Wave Device: Node 2 Z-Wave Home Security Set to NOTIFICATION for type Home Security, Event: No Event
apr-30 15:36:20 Z-Wave Device: 1. etg Gang Motion, Sensor Set to Off/Closed/No Motion
apr-30 15:35:28 Z-Wave Device: Node 6 Z-Wave Volts Set to 232,28 (232,28 Volts)
apr-30 15:35:23 Device Control Device: 1. etg Gang Varmekabler, Switch to Off (0) by/from: CAPI Control Handler
apr-30 15:35:23 Device Control Device: 2. etg Stue Ovn TV, Switch to Off (0) by/from: CAPI Control Handler
apr-30 15:35:23 Device Control Device: 2. etg Stue Ovn Vindu, Switch to Off (0) by/from: CAPI Control Handler
apr-30 15:34:08 Z-Wave Device: Node 2 Z-Wave Home Security Set to NOTIFICATION for type Home Security, Event: Motion Detected
apr-30 15:34:08 Z-Wave Device: 1. etg Gang Motion, Sensor Set to On/Open/Motion
apr-30 15:33:14 Z-Wave Device: 1. etg Gang Inngangsdør, Sensor Set to On/Open/Motion
apr-30 15:33:13 Z-Wave Device: 1. etg Gang Inngangsdør, Notification Set to NOTIFICATION for type Access Control Notification, Event: Open
apr-30 15:30:28 Z-Wave Device: Node 6 Z-Wave Volts Set to 231,76 (231,76 Volts)
apr-30 15:30:23 Device Control Device: 1. etg Gang Varmekabler, Switch to Off (0) by/from: CAPI Control Handler
apr-30 15:30:23 Device Control Device: 2. etg Stue Ovn TV, Switch to Off (0) by/from: CAPI Control Handler
apr-30 15:30:23 Device Control Device: 2. etg Stue Ovn Vindu, Switch to Off (0) by/from: CAPI Control Handler
apr-30 15:27:48 Z-Wave Device: Node 2 Z-Wave Luminance Set to 5 (Lux)
apr-30 15:27:46 Event Running script statement immediately: &hs.setDeviceValueByRef(145,hs.DeviceValueEx(9),True)
apr-30 15:27:46 Event Event Trigger "Varmekontroll Gang_temp_RFXCOM"
apr-30 15:27:46 Z-Wave Device: 1. etg Gang Temp, Sensor Set to 23,9 (C)
apr-30 15:25:41 Buienradar Incorrect amount of data received from Buienradar: (since 29.04.2018 22:17:16)
apr-30 15:25:28 Z-Wave Device: Node 6 Z-Wave Volts Set to 232,38 (232,38 Volts)
apr-30 15:25:23 Device Control Device: 1. etg Gang Varmekabler, Switch to Off (0) by/from: CAPI Control Handler
apr-30 15:25:23 Device Control Device: 2. etg Stue Ovn TV, Switch to Off (0) by/from: CAPI Control Handler
apr-30 15:25:23 Device Control Device: 2. etg Stue Ovn Vindu, Switch to Off (0) by/from: CAPI Control Handler
apr-30 15:20:28 Z-Wave Device: Node 6 Z-Wave Volts Set to 232,79 (232,79 Volts)
apr-30 15:20:23 Device Control Device: 1. etg Gang Varmekabler, Switch to Off (0) by/from: CAPI Control Handler
apr-30 15:20:23 Device Control Device: 2. etg Stue Ovn TV, Switch to Off (0) by/from: CAPI Control Handler
apr-30 15:20:23 Device Control Device: 2. etg Stue Ovn Vindu, Switch to Off (0) by/from: CAPI Control Handler
apr-30 15:15:28 Z-Wave Device: Node 6 Z-Wave Volts Set to 232,03 (232,03 Volts)
apr-30 15:15:23 Device Control Device: 1. etg Gang Varmekabler, Switch to Off (0) by/from: CAPI Control Handler
apr-30 15:15:23 Device Control Device: 2. etg Stue Ovn TV, Switch to Off (0) by/from: CAPI Control Handler
apr-30 15:15:23 Device Control Device: 2. etg Stue Ovn Vindu, Switch to Off (0) by/from: CAPI Control Handler
apr-30 15:10:38 Buienradar Incorrect amount of data received from Buienradar: (since 29.04.2018 22:17:16)
apr-30 15:10:28 Z-Wave Device: Node 6 Z-Wave Volts Set to 233,38 (233,38 Volts)
apr-30 15:10:23 Device Control Device: 1. etg Gang Varmekabler, Switch to Off (0) by/from: CAPI Control Handler
apr-30 15:10:23 Device Control Device: 2. etg Stue Ovn TV, Switch to Off (0) by/from: CAPI Control Handler
apr-30 15:10:23 Device Control Device: 2. etg Stue Ovn Vindu, Switch to Off (0) by/from: CAPI Control Handler
apr-30 15:09:38 Z-Wave Device: Node 3 Z-Wave Luminance Set to 42 (Lux)
apr-30 15:09:37 Event Running script statement immediately: &hs.setDeviceValueByRef(141,hs.DeviceValueEx(17),True)
apr-30 15:09:37 Event Running script statement immediately: &hs.setDeviceValueByRef(124,hs.DeviceValueEx(17),True)
apr-30 15:09:37 Event Event Trigger "Varmekontroll Stue_temp_RFXCOM"
apr-30 15:09:37 Z-Wave Device: 2. etg Stue Temp, Sensor Set to 23,8 (C)
apr-30 15:05:28 Z-Wave Device: Node 6 Z-Wave Volts Set to 232,71 (232,71 Volts)
apr-30 15:05:23 Device Control Device: 1. etg Gang Varmekabler, Switch to Off (0) by/from: CAPI Control Handler
apr-30 15:05:23 Device Control Device: 2. etg Stue Ovn TV, Switch to Off (0) by/from: CAPI Control Handler
apr-30 15:05:22 Device Control Device: 2. etg Stue Ovn Vindu, Switch to Off (0) by/from: CAPI Control Handler
apr-30 15:00:28 Z-Wave Device: Node 6 Z-Wave Volts Set to 233,17 (233,17 Volts)
apr-30 15:00:22 Device Control Device: 1. etg Gang Varmekabler, Switch to Off (0) by/from: CAPI Control Handler
apr-30 15:00:22 Device Control Device: 2. etg Stue Ovn TV, Switch to Off (0) by/from: CAPI Control Handler
apr-30 15:00:22 Device Control Device: 2. etg Stue Ovn Vindu, Switch to Off (0) by/from: CAPI Control Handler
apr-30 14:55:35 Buienradar Incorrect amount of data received from Buienradar: (since 29.04.2018 22:17:16)
apr-30 14:55:28 Z-Wave Device: Node 6 Z-Wave Volts Set to 232,87 (232,87 Volts)
apr-30 14:55:22 Device Control Device: 1. etg Gang Varmekabler, Switch to Off (0) by/from: CAPI Control Handler
apr-30 14:55:22 Device Control Device: 2. etg Stue Ovn TV, Switch to Off (0) by/from: CAPI Control Handler
apr-30 14:55:22 Device Control Device: 2. etg Stue Ovn Vindu, Switch to Off (0) by/from: CAPI Control Handler
apr-30 14:50:28 Z-Wave Device: Node 6 Z-Wave Volts Set to 231,39 (231,39 Volts)
apr-30 14:50:22 Device Control Device: 1. etg Gang Varmekabler, Switch to Off (0) by/from: CAPI Control Handler
apr-30 14:50:22 Device Control Device: 2. etg Stue Ovn TV, Switch to Off (0) by/from: CAPI Control Handler
apr-30 14:50:22 Device Control Device: 2. etg Stue Ovn Vindu, Switch to Off (0) by/from: CAPI Control Handler
apr-30 14:45:28 Z-Wave Device: Node 6 Z-Wave Volts Set to 231,63 (231,63 Volts)
apr-30 14:45:22 Device Control Device: 1. etg Gang Varmekabler, Switch to Off (0) by/from: CAPI Control Handler
apr-30 14:45:22 Device Control Device: 2. etg Stue Ovn TV, Switch to Off (0) by/from: CAPI Control Handler
apr-30 14:45:22 Device Control Device: 2. etg Stue Ovn Vindu, Switch to Off (0) by/from: CAPI Control Handler
apr-30 14:40:32 Buienradar Incorrect amount of data received from Buienradar: (since 29.04.2018 22:17:16)
apr-30 14:40:28 Z-Wave Device: Node 6 Z-Wave Volts Set to 233,26 (233,26 Volts)
apr-30 14:40:22 Device Control Device: 1. etg Gang Varmekabler, Switch to Off (0) by/from: CAPI Control Handler
apr-30 14:40:22 Device Control Device: 2. etg Stue Ovn TV, Switch to Off (0) by/from: CAPI Control Handler
apr-30 14:40:22 Device Control Device: 2. etg Stue Ovn Vindu, Switch to Off (0) by/from: CAPI Control Handler
apr-30 14:35:28 Z-Wave Device: Node 6 Z-Wave Volts Set to 232,37 (232,37 Volts)
apr-30 14:35:22 Device Control Device: 1. etg Gang Varmekabler, Switch to Off (0) by/from: CAPI Control Handler
apr-30 14:35:22 Device Control Device: 2. etg Stue Ovn TV, Switch to Off (0) by/from: CAPI Control Handler
apr-30 14:35:22 Device Control Device: 2. etg Stue Ovn Vindu, Switch to Off (0) by/from: CAPI Control Handler
apr-30 14:30:28 Z-Wave Device: Node 6 Z-Wave Volts Set to 233,28 (233,28 Volts)
apr-30 14:30:22 Device Control Device: 1. etg Gang Varmekabler, Switch to Off (0) by/from: CAPI Control Handler
apr-30 14:30:22 Device Control Device: 2. etg Stue Ovn TV, Switch to Off (0) by/from: CAPI Control Handler
apr-30 14:30:22 Device Control Device: 2. etg Stue Ovn Vindu, Switch to Off (0) by/from: CAPI Control Handler
apr-30 14:27:46 Z-Wave Device: Node 2 Z-Wave Luminance Set to 2 (Lux)
apr-30 14:27:45 Event Running script statement immediately: &hs.setDeviceValueByRef(145,hs.DeviceValueEx(9),True)
apr-30 14:27:45 Event Event Trigger "Varmekontroll Gang_temp_RFXCOM"
apr-30 14:27:45 Z-Wave Device: 1. etg Gang Temp, Sensor Set to 24 (C)
apr-30 14:25:30 Buienradar Incorrect amount of data received from Buienradar: (since 29.04.2018 22:17:16)
apr-30 14:25:28 Z-Wave Device: Node 6 Z-Wave Volts Set to 233,12 (233,12 Volts)
apr-30 14:25:22 Device Control Device: 1. etg Gang Varmekabler, Switch to Off (0) by/from: CAPI Control Handler
apr-30 14:25:22 Device Control Device: 2. etg Stue Ovn TV, Switch to Off (0) by/from: CAPI Control Handler
apr-30 14:25:22 Device Control Device: 2. etg Stue Ovn Vindu, Switch to Off (0) by/from: CAPI Control Handler
apr-30 14:20:28 Z-Wave Device: Node 6 Z-Wave Volts Set to 233,87 (233,87 Volts)
apr-30 14:20:22 Device Control Device: 1. etg Gang Varmekabler, Switch to Off (0) by/from: CAPI Control Handler
apr-30 14:20:22 Device Control Device: 2. etg Stue Ovn TV, Switch to Off (0) by/from: CAPI Control Handler
apr-30 14:20:22 Device Control Device: 2. etg Stue Ovn Vindu, Switch to Off (0) by/from: CAPI Control Handler
apr-30 14:18:50 Z-Wave Device: Node 2 Z-Wave Home Security Set to NOTIFICATION for type Home Security, Event: No Event
apr-30 14:18:50 Z-Wave Device: 1. etg Gang Motion, Sensor Set to Off/Closed/No Motion
apr-30 14:18:41 Z-Wave Device: 1. etg Gang Inngangsdør, Sensor Set to Off/Closed/No Motion
apr-30 14:18:41 Z-Wave Device: 1. etg Gang Inngangsdør, Notification Set to NOTIFICATION for type Access Control Notification, Event: Closed
apr-30 14:18:36 Z-Wave Device: 1. etg Gang Inngangsdør, Sensor Set to On/Open/Motion
apr-30 14:18:36 Z-Wave Device: 1. etg Gang Inngangsdør, Notification Set to NOTIFICATION for type Access Control Notification, Event: Open
apr-30 14:17:41 Z-Wave Device: Node 2 Z-Wave Home Security Set to NOTIFICATION for type Home Security, Event: Motion Detected
apr-30 14:17:41 Z-Wave Device: 1. etg Gang Motion, Sensor Set to On/Open/Motion
apr-30 14:15:28 Z-Wave Device: Node 6 Z-Wave Volts Set to 233,02 (233,02 Volts)
apr-30 14:15:22 Device Control Device: 1. etg Gang Varmekabler, Switch to Off (0) by/from: CAPI Control Handler
apr-30 14:15:22 Device Control Device: 2. etg Stue Ovn TV, Switch to Off (0) by/from: CAPI Control Handler
apr-30 14:15:22 Device Control Device: 2. etg Stue Ovn Vindu, Switch to Off (0) by/from: CAPI Control Handler
apr-30 14:11:14 Z-Wave Device: Node 2 Z-Wave Home Security Set to NOTIFICATION for type Home Security, Event: No Event
apr-30 14:11:14 Z-Wave Device: 1. etg Gang Motion, Sensor Set to Off/Closed/No Motion
apr-30 14:10:28 Z-Wave Device: Node 6 Z-Wave Volts Set to 234,35 (234,35 Volts)
apr-30 14:10:27 Buienradar Incorrect amount of data received from Buienradar: (since 29.04.2018 22:17:16)
apr-30 14:10:22 Device Control Device: 1. etg Gang Varmekabler, Switch to Off (0) by/from: CAPI Control Handler
apr-30 14:10:22 Device Control Device: 2. etg Stue Ovn TV, Switch to Off (0) by/from: CAPI Control Handler
apr-30 14:10:22 Device Control Device: 2. etg Stue Ovn Vindu, Switch to Off (0) by/from: CAPI Control Handler
apr-30 14:09:37 Z-Wave Device: Node 3 Z-Wave Luminance Set to 97 (Lux)
apr-30 14:09:35 Event Running script statement immediately: &hs.setDeviceValueByRef(141,hs.DeviceValueEx(17),True)
apr-30 14:09:35 Event Running script statement immediately: &hs.setDeviceValueByRef(124,hs.DeviceValueEx(17),True)
apr-30 14:09:35 Event Event Trigger "Varmekontroll Stue_temp_RFXCOM"
apr-30 14:09:35 Z-Wave Device: 2. etg Stue Temp, Sensor Set to 23,9 (C)
apr-30 14:09:19 Z-Wave Device: Node 2 Z-Wave Home Security Set to NOTIFICATION for type Home Security, Event: Motion Detected
apr-30 14:09:19 Z-Wave Device: 1. etg Gang Motion, Sensor Set to On/Open/Motion
apr-30 14:05:28 Z-Wave Device: Node 6 Z-Wave Volts Set to 233,39 (233,39 Volts)
apr-30 14:05:22 Device Control Device: 1. etg Gang Varmekabler, Switch to Off (0) by/from: CAPI Control Handler
apr-30 14:05:22 Device Control Device: 2. etg Stue Ovn TV, Switch to Off (0) by/from: CAPI Control Handler
apr-30 14:05:22 Device Control Device: 2. etg Stue Ovn Vindu, Switch to Off (0) by/from: CAPI Control Handler
apr-30 14:05:05 Z-Wave Device: Node 8 Z-Wave Volts Set to 233,1 (233,1 Volts)
apr-30 14:05:04 Z-Wave Device: Node 8 Z-Wave Watts Set to 6,01 (6,01 Watts)
apr-30 14:00:28 Z-Wave Device: Node 6 Z-Wave Volts Set to 233,77 (233,77 Volts)
apr-30 14:00:22 Device Control Device: 1. etg Gang Varmekabler, Switch to Off (0) by/from: CAPI Control Handler
apr-30 14:00:22 Device Control Device: 2. etg Stue Ovn TV, Switch to Off (0) by/from: CAPI Control Handler
apr-30 14:00:22 Device Control Device: 2. etg Stue Ovn Vindu, Switch to Off (0) by/from: CAPI Control Handler
apr-30 14:00:04 Z-Wave Device: Node 8 Z-Wave Volts Set to 233,36 (233,36 Volts)
apr-30 14:00:02 Z-Wave Device: Node 8 Z-Wave Watts Set to 6,12 (6,12 Watts)
apr-30 13:55:28 Z-Wave Device: Node 6 Z-Wave Volts Set to 233,92 (233,92 Volts)
apr-30 13:55:24 Buienradar Incorrect amount of data received from Buienradar: (since 29.04.2018 22:17:16)
apr-30 13:55:22 Device Control Device: 1. etg Gang Varmekabler, Switch to Off (0) by/from: CAPI Control Handler
apr-30 13:55:22 Device Control Device: 2. etg Stue Ovn TV, Switch to Off (0) by/from: CAPI Control Handler
apr-30 13:55:22 Device Control Device: 2. etg Stue Ovn Vindu, Switch to Off (0) by/from: CAPI Control Handler
apr-30 13:55:04 Z-Wave Device: Node 8 Z-Wave Volts Set to 234,04 (234,04 Volts)
apr-30 13:55:03 Z-Wave Device: Node 8 Z-Wave Watts Set to 6,05 (6,05 Watts)
apr-30 13:50:28 Z-Wave Device: Node 6 Z-Wave Volts Set to 232,86 (232,86 Volts)
apr-30 13:50:22 Device Control Device: 1. etg Gang Varmekabler, Switch to Off (0) by/from: CAPI Control Handler
apr-30 13:50:22 Device Control Device: 2. etg Stue Ovn TV, Switch to Off (0) by/from: CAPI Control Handler
apr-30 13:50:22 Device Control Device: 2. etg Stue Ovn Vindu, Switch to Off (0) by/from: CAPI Control Handler
apr-30 13:50:04 Z-Wave Device: Node 8 Z-Wave Volts Set to 232,69 (232,69 Volts)
apr-30 13:50:02 Z-Wave Device: Node 8 Z-Wave Watts Set to 6,07 (6,07 Watts)
apr-30 13:45:28 Z-Wave Device: Node 6 Z-Wave Volts Set to 233,3 (233,3 Volts)
apr-30 13:45:22 Device Control Device: 1. etg Gang Varmekabler, Switch to Off (0) by/from: CAPI Control Handler
apr-30 13:45:22 Device Control Device: 2. etg Stue Ovn TV, Switch to Off (0) by/from: CAPI Control Handler
apr-30 13:45:22 Device Control Device: 2. etg Stue Ovn Vindu, Switch to Off (0) by/from: CAPI Control Handler
apr-30 13:45:03 Z-Wave Device: Node 8 Z-Wave Volts Set to 231,78 (231,78 Volts)
apr-30 13:45:02 Z-Wave Device: Node 8 Z-Wave Watts Set to 6,09 (6,09 Watts)
apr-30 13:40:28 Z-Wave Device: Node 6 Z-Wave Volts Set to 232,62 (232,62 Volts)
apr-30 13:40:22 Device Control Device: 1. etg Gang Varmekabler, Switch to Off (0) by/from: CAPI Control Handler
apr-30 13:40:22 Device Control Device: 2. etg Stue Ovn TV, Switch to Off (0) by/from: CAPI Control Handler
apr-30 13:40:22 Device Control Device: 2. etg Stue Ovn Vindu, Switch to Off (0) by/from: CAPI Control Handler
apr-30 13:40:21 Buienradar Incorrect amount of data received from Buienradar: (since 29.04.2018 22:17:16)
apr-30 13:40:03 Z-Wave Device: Node 8 Z-Wave Volts Set to 231,92 (231,92 Volts)
apr-30 13:40:02 Z-Wave Device: Node 8 Z-Wave Watts Set to 6,01 (6,01 Watts)
apr-30 13:35:28 Z-Wave Device: Node 6 Z-Wave Volts Set to 233,6 (233,6 Volts)
apr-30 13:35:22 Device Control Device: 1. etg Gang Varmekabler, Switch to Off (0) by/from: CAPI Control Handler
apr-30 13:35:22 Device Control Device: 2. etg Stue Ovn TV, Switch to Off (0) by/from: CAPI Control Handler
apr-30 13:35:22 Device Control Device: 2. etg Stue Ovn Vindu, Switch to Off (0) by/from: CAPI Control Handler
apr-30 13:35:01 Z-Wave Device: Node 8 Z-Wave Volts Set to 233,19 (233,19 Volts)
apr-30 13:35:00 Z-Wave Device: Node 8 Z-Wave Watts Set to 6,06 (6,06 Watts)
apr-30 13:30:28 Z-Wave Device: Node 6 Z-Wave Volts Set to 232,88 (232,88 Volts)
apr-30 13:30:22 Device Control Device: 1. etg Gang Varmekabler, Switch to Off (0) by/from: CAPI Control Handler
apr-30 13:30:22 Device Control Device: 2. etg Stue Ovn TV, Switch to Off (0) by/from: CAPI Control Handler
apr-30 13:30:22 Device Control Device: 2. etg Stue Ovn Vindu, Switch to Off (0) by/from: CAPI Control Handler
apr-30 13:30:02 Z-Wave Device: Node 8 Z-Wave Amperes Set to 0,04 (0,04 Amperes)
apr-30 13:30:01 Z-Wave Device: Node 8 Z-Wave Volts Set to 232,31 (232,31 Volts)
apr-30 13:30:00 Z-Wave Device: Node 8 Z-Wave Watts Set to 6,01 (6,01 Watts)
apr-30 13:29:56 Z-Wave Device: Node 8 Z-Wave Amperes Set to 0,05 (0,05 Amperes)
apr-30 13:29:55 Z-Wave Device: Node 8 Z-Wave Volts Set to 232,29 (232,29 Volts)
apr-30 13:29:54 Z-Wave Device: Node 8 Z-Wave Watts Set to 6,04 (6,04 Watts)
apr-30 13:29:17 Z-Wave Device: Node 8 Z-Wave Volts Set to 232,4 (232,4 Volts)
apr-30 13:29:16 Z-Wave Device: Node 8 Z-Wave Watts Set to 6,12 (6,12 Watts)
apr-30 13:27:45 Z-Wave Device: Node 2 Z-Wave Luminance Set to 5 (Lux)
apr-30 13:27:44 Z-Wave Device: 1. etg Gang Luftfuktighet, Sensor Set to 26 (%)
apr-30 13:27:43 Event Running script statement immediately: &hs.setDeviceValueByRef(145,hs.DeviceValueEx(9),True)
apr-30 13:27:43 Event Event Trigger "Varmekontroll Gang_temp_RFXCOM"
apr-30 13:27:43 Z-Wave Device: 1. etg Gang Temp, Sensor Set to 23,9 (C)
apr-30 13:25:28 Z-Wave Device: Node 6 Z-Wave Volts Set to 233,19 (233,19 Volts)
apr-30 13:25:22 Device Control Device: 1. etg Gang Varmekabler, Switch to Off (0) by/from: CAPI Control Handler
apr-30 13:25:22 Device Control Device: 2. etg Stue Ovn TV, Switch to Off (0) by/from: CAPI Control Handler
apr-30 13:25:22 Device Control Device: 2. etg Stue Ovn Vindu, Switch to Off (0) by/from: CAPI Control Handler
apr-30 13:25:19 Buienradar Incorrect amount of data received from Buienradar: (since 29.04.2018 22:17:16)
apr-30 13:24:15 Z-Wave Device: Node 8 Z-Wave Volts Set to 232,92 (232,92 Volts)
apr-30 13:24:14 Z-Wave Device: Node 8 Z-Wave Watts Set to 6,16 (6,16 Watts)
apr-30 13:20:29 Z-Wave Device: Node 6 Z-Wave Volts Set to 231,9 (231,9 Volts)
apr-30 13:20:22 Device Control Device: 1. etg Gang Varmekabler, Switch to Off (0) by/from: CAPI Control Handler
apr-30 13:20:22 Device Control Device: 2. etg Stue Ovn TV, Switch to Off (0) by/from: CAPI Control Handler
apr-30 13:20:22 Device Control Device: 2. etg Stue Ovn Vindu, Switch to Off (0) by/from: CAPI Control Handler
apr-30 13:19:14 Z-Wave Device: Node 8 Z-Wave Volts Set to 231,68 (231,68 Volts)
apr-30 13:19:13 Z-Wave Device: Node 8 Z-Wave Watts Set to 6,11 (6,11 Watts)
apr-30 13:15:29 Z-Wave Device: Node 6 Z-Wave Volts Set to 233,31 (233,31 Volts)
apr-30 13:15:22 Device Control Device: 1. etg Gang Varmekabler, Switch to Off (0) by/from: CAPI Control Handler
apr-30 13:15:22 Device Control Device: 2. etg Stue Ovn TV, Switch to Off (0) by/from: CAPI Control Handler
apr-30 13:15:22 Device Control Device: 2. etg Stue Ovn Vindu, Switch to Off (0) by/from: CAPI Control Handler
apr-30 13:15:00 Log Info The log database is currently 2,17MB in size.
apr-30 13:14:15 Z-Wave Device: Node 8 Z-Wave Amperes Set to 0,04 (0,04 Amperes)
apr-30 13:14:14 Z-Wave Device: Node 8 Z-Wave Volts Set to 233,67 (233,67 Volts)
apr-30 13:14:13 Z-Wave Device: Node 8 Z-Wave Watts Set to 6,14 (6,14 Watts)
apr-30 13:14:08 Z-Wave Device: Node 8 Z-Wave Amperes Set to 0,05 (0,05 Amperes)
apr-30 13:14:07 Z-Wave Device: Node 8 Z-Wave Volts Set to 232,78 (232,78 Volts)
apr-30 13:14:06 Z-Wave Device: Node 8 Z-Wave Watts Set to 6,25 (6,25 Watts)
apr-30 13:11:23 Z-Wave Device: Node 8 Z-Wave Volts Set to 232,21 (232,21 Volts)
apr-30 13:11:22 Z-Wave Device: Node 8 Z-Wave Watts Set to 6,12 (6,12 Watts)
apr-30 13:10:29 Z-Wave Device: Node 6 Z-Wave Volts Set to 233,38 (233,38 Volts)
apr-30 13:10:22 Device Control Device: 1. etg Gang Varmekabler, Switch to Off (0) by/from: CAPI Control Handler
apr-30 13:10:22 Device Control Device: 2. etg Stue Ovn TV, Switch to Off (0) by/from: CAPI Control Handler
apr-30 13:10:22 Device Control Device: 2. etg Stue Ovn Vindu, Switch to Off (0) by/from: CAPI Control Handler
apr-30 13:10:16 Buienradar Incorrect amount of data received from Buienradar: (since 29.04.2018 22:17:16)
apr-30 13:09:35 Z-Wave Device: Node 3 Z-Wave Luminance Set to 95 (Lux)
apr-30 13:09:34 Event Running script statement immediately: &hs.setDeviceValueByRef(141,hs.DeviceValueEx(17),True)
apr-30 13:09:34 Event Running script statement immediately: &hs.setDeviceValueByRef(124,hs.DeviceValueEx(17),True)
apr-30 13:09:34 Event Event Trigger "Varmekontroll Stue_temp_RFXCOM"
apr-30 13:09:34 Z-Wave Device: 2. etg Stue Temp, Sensor Set to 23,8 (C)
apr-30 13:06:22 Z-Wave Device: Node 8 Z-Wave Volts Set to 233,35 (233,35 Volts)
apr-30 13:06:21 Z-Wave Device: Node 8 Z-Wave Watts Set to 6,14 (6,14 Watts)
apr-30 13:06:00 Energy DB Info All energy database compacting routines completed.
apr-30 13:06:00 Energy DB Database is 0,1689453 MB in size. No further compaction needed.
apr-30 13:06:00 Energy DB Info Compacting remaining data...
apr-30 13:06:00 Energy DB Info Compacting data older than 4 months...
apr-30 13:06:00 Energy DB Info Compacting data older than 1 year...
apr-30 13:06:00 Energy DB Info Compacting data older than 3 years...
apr-30 13:06:00 Energy DB Info Compacting data older than 5 years...
apr-30 13:06:00 Energy DB Info Compacting data older than 10 years...
apr-30 13:06:00 Energy DB Info Energy database compaction initiated.
apr-30 13:05:29 Z-Wave Device: Node 6 Z-Wave Volts Set to 234,06 (234,06 Volts)
apr-30 13:05:22 Device Control Device: 1. etg Gang Varmekabler, Switch to Off (0) by/from: CAPI Control Handler
apr-30 13:05:22 Device Control Device: 2. etg Stue Ovn TV, Switch to Off (0) by/from: CAPI Control Handler
apr-30 13:05:22 Device Control Device: 2. etg Stue Ovn Vindu, Switch to Off (0) by/from: CAPI Control Handler
apr-30 13:04:15 Z-Wave Device: 1. etg Gang Taklys, Dimmer Set to 50
apr-30 13:04:15 Device Control Device: Hus Hus Borte, Virtual to Off (0)
apr-30 13:04:15 Device Control Device: 1. etg Gang Taklys, Dimmer to Dim 50% (50)
apr-30 13:04:15 Device Control Device: Hus Hus Varme, Virtual to On (100)
apr-30 13:04:15 Device Control Device: Hus Hus Natt Alt, Virtual to Off (0)
apr-30 13:04:15 Device Control Device: Hus Hus Hovedbryter, Virtuel to On (100)
apr-30 13:04:15 Device Control Device: Hus Hus Borte, Virtual to Off (0)
apr-30 13:04:15 Event Event Trigger "Hus Hjemme"
apr-30 13:04:15 Device Control Device: Hus Hus Hjemme, Virtual to On (100) by/from: CAPI Control Handler
apr-30 13:03:45 Z-Wave Device: 1. etg Gang Taklys, Dimmer Set to 56
apr-30 13:03:45 Device Control Device: 1. etg Gang Taklys, Dimmer to Dim 56% (56) by/from: CAPI Control Handler
apr-30 13:03:42 Z-Wave Device: 1. etg Gang Taklys, Dimmer Set to 28
apr-30 13:03:42 Device Control Device: 1. etg Gang Taklys, Dimmer to Dim 28% (28) by/from: CAPI Control Handler
apr-30 13:03:26 Z-Wave Device: 1. etg Gang Taklys, Dimmer Set to 99
apr-30 13:03:26 Device Control Device: 1. etg Gang Taklys, Dimmer to On (99) by/from: CAPI Control Handler
apr-30 13:01:22 Z-Wave Device: Node 8 Z-Wave Volts Set to 232,14 (232,14 Volts)
apr-30 13:01:21 Z-Wave Device: Node 8 Z-Wave Watts Set to 6,17 (6,17 Watts)
apr-30 13:00:29 Z-Wave Device: Node 6 Z-Wave Volts Set to 234,43 (234,43 Volts)
apr-30 13:00:22 Device Control Device: 1. etg Gang Varmekabler, Switch to Off (0) by/from: CAPI Control Handler
apr-30 13:00:22 Device Control Device: 2. etg Stue Ovn TV, Switch to Off (0) by/from: CAPI Control Handler
apr-30 13:00:22 Device Control Device: 2. etg Stue Ovn Vindu, Switch to Off (0) by/from: CAPI Control Handler
apr-30 12:56:58 Z-Wave Device: Node 8 Z-Wave Volts Set to 234,22 (234,22 Volts)
apr-30 12:56:58 Z-Wave Device: Node 6 Z-Wave Volts Set to 234,47 (234,47 Volts)
apr-30 12:56:57 Z-Wave Device: Node 8 Z-Wave Watts Set to 6,25 (6,25 Watts)
apr-30 12:56:56 Z-Wave Device: Node 8 Z-Wave Amperes Set to 0,04 (0,04 Amperes)
apr-30 12:56:55 Z-Wave Device: Node 8 Z-Wave Volts Set to 234,32 (234,32 Volts)
apr-30 12:56:54 Z-Wave Device: Node 8 Z-Wave Watts Set to 6,34 (6,34 Watts)
apr-30 12:56:51 Z-Wave Device: 2. etg Stue Taklys spisebord, Switch Set to 255
apr-30 12:56:50 Z-Wave Device: 1. etg Gang Taklys, Dimmer Set to 50
apr-30 12:56:50 Device Control Device: 2. etg Stue Taklys spisebord, Switch to On (255) by/from: CAPI Control Handler
apr-30 12:56:50 Device Control Device: 1. etg Gang Varmekabler, Switch to Off (0) by/from: CAPI Control Handler
apr-30 12:56:50 Device Control Device: 2. etg Stue Ovn Vindu, Switch to Off (0) by/from: CAPI Control Handler
apr-30 12:56:50 Device Control Device: 2. etg Stue Ovn TV, Switch to Off (0) by/from: CAPI Control Handler
apr-30 12:56:50 Device Control Device: 1. etg Gang Set point VARMEKABLER to 23 °C (23)
apr-30 12:56:50 Device Control Device: 2. etg Stue Set point VINDU to 23 °C (23)
apr-30 12:56:50 Device Control Device: 2. etg Stue Set point TV to 23 °C (23)
apr-30 12:56:50 Device Control Device: Hus Hus Borte, Virtual to Off (0)
apr-30 12:56:50 Device Control Device: 1. etg Gang Taklys, Dimmer to Dim 50% (50)
apr-30 12:56:50 Event Event Trigger "Varmekontroll Varme-bryter hev"
apr-30 12:56:50 Device Control Device: Hus Hus Varme, Virtual to On (100)
apr-30 12:56:50 Device Control Device: Hus Hus Natt Alt, Virtual to Off (0)
apr-30 12:56:50 Device Control Device: Hus Hus Hovedbryter, Virtuel to On (100)
apr-30 12:56:50 Device Control Device: Hus Hus Borte, Virtual to Off (0)
apr-30 12:56:50 Event Event Trigger "Hus Hjemme"
apr-30 12:56:50 Device Control Device: Hus Hus Hjemme, Virtual to On (100) by/from: CAPI Control Handler
apr-30 12:55:29 Z-Wave Device: Node 6 Z-Wave Volts Set to 233 (233 Volts)
apr-30 12:55:22 Device Control Device: 1. etg Gang Varmekabler, Switch to Off (0) by/from: CAPI Control Handler
apr-30 12:55:22 Device Control Device: 2. etg Stue Ovn TV, Switch to Off (0) by/from: CAPI Control Handler
apr-30 12:55:22 Device Control Device: 2. etg Stue Ovn Vindu, Switch to Off (0) by/from: CAPI Control Handler
apr-30 12:55:11 Buienradar Incorrect amount of data received from Buienradar: (since 29.04.2018 22:17:16)
apr-30 12:54:22 Z-Wave Device: Node 8 Z-Wave Volts Set to 234,89 (234,89 Volts)
apr-30 12:50:29 Z-Wave Device: Node 6 Z-Wave Volts Set to 233,13 (233,13 Volts)
apr-30 12:50:22 Device Control Device: 1. etg Gang Varmekabler, Switch to Off (0) by/from: CAPI Control Handler
apr-30 12:50:22 Device Control Device: 2. etg Stue Ovn TV, Switch to Off (0) by/from: CAPI Control Handler
apr-30 12:50:22 Device Control Device: 2. etg Stue Ovn Vindu, Switch to Off (0) by/from: CAPI Control Handler
apr-30 12:49:22 Z-Wave Device: Node 8 Z-Wave Volts Set to 233,58 (233,58 Volts)
apr-30 12:45:29 Z-Wave Device: Node 6 Z-Wave Volts Set to 234,06 (234,06 Volts)
apr-30 12:45:22 Device Control Device: 1. etg Gang Varmekabler, Switch to Off (0) by/from: CAPI Control Handler
apr-30 12:45:22 Device Control Device: 2. etg Stue Ovn TV, Switch to Off (0) by/from: CAPI Control Handler
apr-30 12:45:22 Device Control Device: 2. etg Stue Ovn Vindu, Switch to Off (0) by/from: CAPI Control Handler
apr-30 12:44:22 Z-Wave Device: Node 8 Z-Wave Volts Set to 232,59 (232,59 Volts)
apr-30 12:40:29 Z-Wave Device: Node 6 Z-Wave Volts Set to 233,87 (233,87 Volts)
apr-30 12:40:22 Device Control Device: 1. etg Gang Varmekabler, Switch to Off (0) by/from: CAPI Control Handler
apr-30 12:40:22 Device Control Device: 2. etg Stue Ovn TV, Switch to Off (0) by/from: CAPI Control Handler
apr-30 12:40:22 Device Control Device: 2. etg Stue Ovn Vindu, Switch to Off (0) by/from: CAPI Control Handler
apr-30 12:40:00 Buienradar Incorrect amount of data received from Buienradar: (since 29.04.2018 22:17:16)
apr-30 12:39:22 Z-Wave Device: Node 8 Z-Wave Volts Set to 232,98 (232,98 Volts)
apr-30 12:35:29 Z-Wave Device: Node 6 Z-Wave Volts Set to 233,69 (233,69 Volts)
apr-30 12:35:22 Device Control Device: 1. etg Gang Varmekabler, Switch to Off (0) by/from: CAPI Control Handler
apr-30 12:35:22 Device Control Device: 2. etg Stue Ovn TV, Switch to Off (0) by/from: CAPI Control Handler
apr-30 12:35:22 Device Control Device: 2. etg Stue Ovn Vindu, Switch to Off (0) by/from: CAPI Control Handler
apr-30 12:34:22 Z-Wave Device: Node 8 Z-Wave Volts Set to 233,89 (233,89 Volts)
apr-30 12:30:29 Z-Wave Device: Node 6 Z-Wave Volts Set to 232,51 (232,51 Volts)
apr-30 12:30:22 Device Control Device: 1. etg Gang Varmekabler, Switch to Off (0) by/from: CAPI Control Handler
apr-30 12:30:22 Device Control Device: 2. etg Stue Ovn TV, Switch to Off (0) by/from: CAPI Control Handler
apr-30 12:30:22 Device Control Device: 2. etg Stue Ovn Vindu, Switch to Off (0) by/from: CAPI Control Handler
apr-30 12:29:22 Z-Wave Device: Node 8 Z-Wave Volts Set to 233,14 (233,14 Volts)
apr-30 12:25:29 Z-Wave Device: Node 6 Z-Wave Volts Set to 233,17 (233,17 Volts)
apr-30 12:25:26 Z-Wave Device: Node 6 Z-Wave Volts Set to 233,42 (233,42 Volts)
apr-30 12:25:22 Device Control Device: 1. etg Gang Varmekabler, Switch to Off (0) by/from: CAPI Control Handler
apr-30 12:25:21 Device Control Device: 2. etg Stue Ovn TV, Switch to Off (0) by/from: CAPI Control Handler
apr-30 12:25:21 Device Control Device: 2. etg Stue Ovn Vindu, Switch to Off (0) by/from: CAPI Control Handler
apr-30 12:24:58 Buienradar Incorrect amount of data received from Buienradar: (since 29.04.2018 22:17:16)
apr-30 12:24:22 Z-Wave Device: Node 8 Z-Wave Volts Set to 234,09 (234,09 Volts)
apr-30 12:20:26 Z-Wave Device: Node 6 Z-Wave Volts Set to 233,59 (233,59 Volts)
apr-30 12:20:21 Device Control Device: 1. etg Gang Varmekabler, Switch to Off (0) by/from: CAPI Control Handler
apr-30 12:20:21 Device Control Device: 2. etg Stue Ovn TV, Switch to Off (0) by/from: CAPI Control Handler
apr-30 12:20:21 Device Control Device: 2. etg Stue Ovn Vindu, Switch to Off (0) by/from: CAPI Control Handler
apr-30 12:19:21 Z-Wave Device: Node 8 Z-Wave Volts Set to 233,14 (233,14 Volts)
apr-30 12:15:26 Z-Wave Device: Node 6 Z-Wave Volts Set to 231,55 (231,55 Volts)
apr-30 12:15:21 Device Control Device: 1. etg Gang Varmekabler, Switch to Off (0) by/from: CAPI Control Handler
apr-30 12:15:21 Device Control Device: 2. etg Stue Ovn TV, Switch to Off (0) by/from: CAPI Control Handler
apr-30 12:15:21 Device Control Device: 2. etg Stue Ovn Vindu, Switch to Off (0) by/from: CAPI Control Handler
apr-30 12:14:21 Z-Wave Device: Node 8 Z-Wave Volts Set to 231,99 (231,99 Volts)
apr-30 12:10:26 Z-Wave Device: Node 6 Z-Wave Volts Set to 232,16 (232,16 Volts)
apr-30 12:10:21 Device Control Device: 1. etg Gang Varmekabler, Switch to Off (0) by/from: CAPI Control Handler
apr-30 12:10:21 Device Control Device: 2. etg Stue Ovn TV, Switch to Off (0) by/from: CAPI Control Handler
apr-30 12:10:21 Device Control Device: 2. etg Stue Ovn Vindu, Switch to Off (0) by/from: CAPI Control Handler
apr-30 12:09:55 Buienradar Incorrect amount of data received from Buienradar: (since 29.04.2018 22:17:16)
apr-30 12:09:34 Z-Wave Device: Node 3 Z-Wave Luminance Set to 100 (Lux)
apr-30 12:09:32 Event Running script statement immediately: &hs.setDeviceValueByRef(141,hs.DeviceValueEx(17),True)
apr-30 12:09:32 Event Running script statement immediately: &hs.setDeviceValueByRef(124,hs.DeviceValueEx(17),True)
apr-30 12:09:32 Event Event Trigger "Varmekontroll Stue_temp_RFXCOM"
apr-30 12:09:32 Z-Wave Device: 2. etg Stue Temp, Sensor Set to 23,2 (C)
apr-30 12:09:21 Z-Wave Device: Node 8 Z-Wave Volts Set to 232,35 (232,35 Volts)
apr-30 12:06:49 Z-Wave Device: Node 2 Z-Wave Home Security Set to NOTIFICATION for type Home Security, Event: No Event
apr-30 12:06:49 Z-Wave Device: 1. etg Gang Taklys, Dimmer Set to 0
apr-30 12:06:49 Device Control Device: 1. etg Gang Taklys, Dimmer to Off (0)
apr-30 12:06:49 Event Event Trigger "Gang Lys Gang av - Natt"
apr-30 12:06:49 Z-Wave Device: 1. etg Gang Motion, Sensor Set to Off/Closed/No Motion
apr-30 12:05:40 Z-Wave Device: Node 2 Z-Wave Home Security Set to NOTIFICATION for type Home Security, Event: Motion Detected
apr-30 12:05:40 Z-Wave Device: 1. etg Gang Taklys, Dimmer Set to 10
apr-30 12:05:40 Device Control Device: 1. etg Gang Taklys, Dimmer to Dim 10% (10)
apr-30 12:05:40 Event Event Trigger "Gang Lys Gang på - Natt"
apr-30 12:05:40 Z-Wave Device: 1. etg Gang Motion, Sensor Set to On/Open/Motion
apr-30 12:05:26 Z-Wave Device: Node 6 Z-Wave Volts Set to 232,95 (232,95 Volts)
apr-30 12:05:21 Device Control Device: 1. etg Gang Varmekabler, Switch to Off (0) by/from: CAPI Control Handler
apr-30 12:05:21 Device Control Device: 2. etg Stue Ovn TV, Switch to Off (0) by/from: CAPI Control Handler
apr-30 12:05:21 Device Control Device: 2. etg Stue Ovn Vindu, Switch to Off (0) by/from: CAPI Control Handler
apr-30 12:05:10 Z-Wave Device: 1. etg Gang Inngangsdør, Sensor Set to Off/Closed/No Motion
apr-30 12:05:10 Z-Wave Device: 1. etg Gang Inngangsdør, Notification Set to NOTIFICATION for type Access Control Notification, Event: Closed
apr-30 12:04:21 Z-Wave Device: Node 8 Z-Wave Volts Set to 232,53 (232,53 Volts)
apr-30 12:02:25 Z-Wave Device: 1. etg Gang Inngangsdør, Sensor Set to On/Open/Motion
apr-30 12:02:25 Z-Wave Device: 1. etg Gang Inngangsdør, Notification Set to NOTIFICATION for type Access Control Notification, Event: Open
apr-30 12:00:26 Z-Wave Device: Node 6 Z-Wave Volts Set to 233,41 (233,41 Volts)
apr-30 12:00:21 Device Control Device: 1. etg Gang Varmekabler, Switch to Off (0) by/from: CAPI Control Handler
apr-30 12:00:21 Device Control Device: 2. etg Stue Ovn TV, Switch to Off (0) by/from: CAPI Control Handler
apr-30 12:00:21 Device Control Device: 2. etg Stue Ovn Vindu, Switch to Off (0) by/from: CAPI Control Handler
apr-30 11:59:21 Z-Wave Device: Node 8 Z-Wave Volts Set to 233,38 (233,38 Volts)
apr-30 11:55:26 Z-Wave Device: Node 6 Z-Wave Volts Set to 232,72 (232,72 Volts)
apr-30 11:55:21 Device Control Device: 1. etg Gang Varmekabler, Switch to Off (0) by/from: CAPI Control Handler
apr-30 11:55:21 Device Control Device: 2. etg Stue Ovn TV, Switch to Off (0) by/from: CAPI Control Handler
apr-30 11:55:21 Device Control Device: 2. etg Stue Ovn Vindu, Switch to Off (0) by/from: CAPI Control Handler
apr-30 11:54:52 Buienradar Incorrect amount of data received from Buienradar: (since 29.04.2018 22:17:16)
apr-30 11:54:21 Z-Wave Device: Node 8 Z-Wave Volts Set to 231,99 (231,99 Volts)
apr-30 11:53:34 Z-Wave Device: Node 2 Z-Wave Home Security Set to NOTIFICATION for type Home Security, Event: No Event
apr-30 11:53:34 Z-Wave Device: 1. etg Gang Taklys, Dimmer Set to 0
apr-30 11:53:34 Device Control Device: 1. etg Gang Taklys, Dimmer to Off (0)
apr-30 11:53:34 Event Event Trigger "Gang Lys Gang av - Natt"
apr-30 11:53:34 Z-Wave Device: 1. etg Gang Motion, Sensor Set to Off/Closed/No Motion
apr-30 11:52:25 Z-Wave Device: Node 2 Z-Wave Home Security Set to NOTIFICATION for type Home Security, Event: Motion Detected
apr-30 11:52:25 Z-Wave Device: 1. etg Gang Taklys, Dimmer Set to 10
apr-30 11:52:25 Device Control Device: 1. etg Gang Taklys, Dimmer to Dim 10% (10)
apr-30 11:52:25 Event Event Trigger "Gang Lys Gang på - Natt"
apr-30 11:52:25 Z-Wave Device: 1. etg Gang Motion, Sensor Set to On/Open/Motion
apr-30 11:50:26 Z-Wave Device: Node 6 Z-Wave Volts Set to 231,34 (231,34 Volts)
apr-30 11:50:21 Device Control Device: 1. etg Gang Varmekabler, Switch to Off (0) by/from: CAPI Control Handler
apr-30 11:50:21 Device Control Device: 2. etg Stue Ovn TV, Switch to Off (0) by/from: CAPI Control Handler
apr-30 11:50:21 Device Control Device: 2. etg Stue Ovn Vindu, Switch to Off (0) by/from: CAPI Control Handler
apr-30 11:49:21 Z-Wave Device: Node 8 Z-Wave Volts Set to 232,77 (232,77 Volts)
apr-30 11:45:26 Z-Wave Device: Node 6 Z-Wave Volts Set to 233,66 (233,66 Volts)
apr-30 11:45:21 Device Control Device: 1. etg Gang Varmekabler, Switch to Off (0) by/from: CAPI Control Handler
apr-30 11:45:21 Device Control Device: 2. etg Stue Ovn TV, Switch to Off (0) by/from: CAPI Control Handler
apr-30 11:45:21 Device Control Device: 2. etg Stue Ovn Vindu, Switch to Off (0) by/from: CAPI Control Handler
apr-30 11:44:21 Z-Wave Device: Node 8 Z-Wave Volts Set to 232,75 (232,75 Volts)
apr-30 11:40:26 Z-Wave Device: Node 6 Z-Wave Volts Set to 234 (234 Volts)
apr-30 11:40:21 Device Control Device: 1. etg Gang Varmekabler, Switch to Off (0) by/from: CAPI Control Handler
apr-30 11:40:21 Device Control Device: 2. etg Stue Ovn TV, Switch to Off (0) by/from: CAPI Control Handler
apr-30 11:40:21 Device Control Device: 2. etg Stue Ovn Vindu, Switch to Off (0) by/from: CAPI Control Handler
apr-30 11:39:50 Buienradar Incorrect amount of data received from Buienradar: (since 29.04.2018 22:17:16)
apr-30 11:39:21 Z-Wave Device: Node 8 Z-Wave Volts Set to 231,95 (231,95 Volts)
apr-30 11:35:26 Z-Wave Device: Node 6 Z-Wave Volts Set to 233,28 (233,28 Volts)
apr-30 11:35:21 Device Control Device: 1. etg Gang Varmekabler, Switch to Off (0) by/from: CAPI Control Handler
apr-30 11:35:21 Device Control Device: 2. etg Stue Ovn TV, Switch to Off (0) by/from: CAPI Control Handler
apr-30 11:35:21 Device Control Device: 2. etg Stue Ovn Vindu, Switch to Off (0) by/from: CAPI Control Handler
apr-30 11:34:21 Z-Wave Device: Node 8 Z-Wave Volts Set to 232,89 (232,89 Volts)
apr-30 11:30:26 Z-Wave Device: Node 6 Z-Wave Volts Set to 232,92 (232,92 Volts)
apr-30 11:30:21 Device Control Device: 1. etg Gang Varmekabler, Switch to Off (0) by/from: CAPI Control Handler
apr-30 11:30:21 Device Control Device: 2. etg Stue Ovn TV, Switch to Off (0) by/from: CAPI Control Handler
apr-30 11:30:21 Device Control Device: 2. etg Stue Ovn Vindu, Switch to Off (0) by/from: CAPI Control Handler
apr-30 11:29:21 Z-Wave Device: Node 8 Z-Wave Volts Set to 234,29 (234,29 Volts)
apr-30 11:27:42 Z-Wave Device: Node 2 Z-Wave Luminance Set to 4 (Lux)
apr-30 11:27:40 Event Running script statement immediately: &hs.setDeviceValueByRef(145,hs.DeviceValueEx(9),True)
apr-30 11:27:40 Event Event Trigger "Varmekontroll Gang_temp_RFXCOM"
apr-30 11:27:40 Z-Wave Device: 1. etg Gang Temp, Sensor Set to 23,7 (C)
apr-30 11:25:26 Z-Wave Device: Node 6 Z-Wave Volts Set to 233,6 (233,6 Volts)
apr-30 11:25:21 Device Control Device: 1. etg Gang Varmekabler, Switch to Off (0) by/from: CAPI Control Handler
apr-30 11:25:21 Device Control Device: 2. etg Stue Ovn TV, Switch to Off (0) by/from: CAPI Control Handler
apr-30 11:25:21 Device Control Device: 2. etg Stue Ovn Vindu, Switch to Off (0) by/from: CAPI Control Handler
apr-30 11:24:47 Buienradar Incorrect amount of data received from Buienradar: (since 29.04.2018 22:17:16)
apr-30 11:24:21 Z-Wave Device: Node 8 Z-Wave Volts Set to 233,83 (233,83 Volts)
apr-30 11:20:26 Z-Wave Device: Node 6 Z-Wave Volts Set to 233,11 (233,11 Volts)
apr-30 11:20:21 Device Control Device: 1. etg Gang Varmekabler, Switch to Off (0) by/from: CAPI Control Handler
apr-30 11:20:21 Device Control Device: 2. etg Stue Ovn TV, Switch to Off (0) by/from: CAPI Control Handler
apr-30 11:20:21 Device Control Device: 2. etg Stue Ovn Vindu, Switch to Off (0) by/from: CAPI Control Handler
apr-30 11:19:21 Z-Wave Device: Node 8 Z-Wave Volts Set to 232,13 (232,13 Volts)
apr-30 11:15:26 Z-Wave Device: Node 6 Z-Wave Volts Set to 231,25 (231,25 Volts)
apr-30 11:15:21 Device Control Device: 1. etg Gang Varmekabler, Switch to Off (0) by/from: CAPI Control Handler
apr-30 11:15:21 Device Control Device: 2. etg Stue Ovn TV, Switch to Off (0) by/from: CAPI Control Handler
apr-30 11:15:21 Device Control Device: 2. etg Stue Ovn Vindu, Switch to Off (0) by/from: CAPI Control Handler
apr-30 11:14:21 Z-Wave Device: Node 8 Z-Wave Volts Set to 231,97 (231,97 Volts)
apr-30 11:10:26 Z-Wave Device: Node 6 Z-Wave Volts Set to 232,52 (232,52 Volts)
apr-30 11:10:21 Device Control Device: 1. etg Gang Varmekabler, Switch to Off (0) by/from: CAPI Control Handler
apr-30 11:10:21 Device Control Device: 2. etg Stue Ovn TV, Switch to Off (0) by/from: CAPI Control Handler
apr-30 11:10:21 Device Control Device: 2. etg Stue Ovn Vindu, Switch to Off (0) by/from: CAPI Control Handler
apr-30 11:09:44 Buienradar Incorrect amount of data received from Buienradar: (since 29.04.2018 22:17:16)
apr-30 11:09:32 Z-Wave Device: Node 3 Z-Wave Luminance Set to 107 (Lux)
apr-30 11:09:21 Z-Wave Device: Node 8 Z-Wave Volts Set to 233,79 (233,79 Volts)
apr-30 11:05:26 Z-Wave Device: Node 6 Z-Wave Volts Set to 232,71 (232,71 Volts)
apr-30 11:05:21 Device Control Device: 1. etg Gang Varmekabler, Switch to Off (0) by/from: CAPI Control Handler
apr-30 11:05:21 Device Control Device: 2. etg Stue Ovn TV, Switch to Off (0) by/from: CAPI Control Handler
apr-30 11:05:21 Device Control Device: 2. etg Stue Ovn Vindu, Switch to Off (0) by/from: CAPI Control Handler
apr-30 11:04:20 Z-Wave Device: Node 8 Z-Wave Volts Set to 232,13 (232,13 Volts)
apr-30 11:00:26 Z-Wave Device: Node 6 Z-Wave Volts Set to 233,32 (233,32 Volts)
apr-30 11:00:21 Device Control Device: 1. etg Gang Varmekabler, Switch to Off (0) by/from: CAPI Control Handler
apr-30 11:00:21 Device Control Device: 2. etg Stue Ovn TV, Switch to Off (0) by/from: CAPI Control Handler
apr-30 11:00:21 Device Control Device: 2. etg Stue Ovn Vindu, Switch to Off (0) by/from: CAPI Control Handler
apr-30 10:59:20 Z-Wave Device: Node 8 Z-Wave Volts Set to 233,02 (233,02 Volts)
apr-30 10:55:26 Z-Wave Device: Node 6 Z-Wave Volts Set to 233,83 (233,83 Volts)
apr-30 10:55:21 Device Control Device: 1. etg Gang Varmekabler, Switch to Off (0) by/from: CAPI Control Handler
apr-30 10:55:21 Device Control Device: 2. etg Stue Ovn TV, Switch to Off (0) by/from: CAPI Control Handler
apr-30 10:55:21 Device Control Device: 2. etg Stue Ovn Vindu, Switch to Off (0) by/from: CAPI Control Handler
apr-30 10:54:42 Buienradar Incorrect amount of data received from Buienradar: (since 29.04.2018 22:17:16)
apr-30 10:54:20 Z-Wave Device: Node 8 Z-Wave Volts Set to 232,6 (232,6 Volts)
apr-30 10:50:26 Z-Wave Device: Node 6 Z-Wave Volts Set to 232,67 (232,67 Volts)
apr-30 10:50:21 Device Control Device: 1. etg Gang Varmekabler, Switch to Off (0) by/from: CAPI Control Handler
apr-30 10:50:21 Device Control Device: 2. etg Stue Ovn TV, Switch to Off (0) by/from: CAPI Control Handler
apr-30 10:50:21 Device Control Device: 2. etg Stue Ovn Vindu, Switch to Off (0) by/from: CAPI Control Handler
apr-30 10:49:20 Z-Wave Device: Node 8 Z-Wave Volts Set to 231,45 (231,45 Volts)
apr-30 10:45:26 Z-Wave Device: Node 6 Z-Wave Volts Set to 232,75 (232,75 Volts)
apr-30 10:45:21 Device Control Device: 1. etg Gang Varmekabler, Switch to Off (0) by/from: CAPI Control Handler
apr-30 10:45:21 Device Control Device: 2. etg Stue Ovn TV, Switch to Off (0) by/from: CAPI Control Handler
apr-30 10:45:21 Device Control Device: 2. etg Stue Ovn Vindu, Switch to Off (0) by/from: CAPI Control Handler
apr-30 10:44:20 Z-Wave Device: Node 8 Z-Wave Volts Set to 233,54 (233,54 Volts)
apr-30 10:40:26 Z-Wave Device: Node 6 Z-Wave Volts Set to 232,61 (232,61 Volts)
apr-30 10:40:21 Device Control Device: 1. etg Gang Varmekabler, Switch to Off (0) by/from: CAPI Control Handler
apr-30 10:40:21 Device Control Device: 2. etg Stue Ovn TV, Switch to Off (0) by/from: CAPI Control Handler
apr-30 10:40:21 Device Control Device: 2. etg Stue Ovn Vindu, Switch to Off (0) by/from: CAPI Control Handler
apr-30 10:39:39 Buienradar Incorrect amount of data received from Buienradar: (since 29.04.2018 22:17:16)
apr-30 10:39:20 Z-Wave Device: Node 8 Z-Wave Volts Set to 231,76 (231,76 Volts)
apr-30 10:35:26 Z-Wave Device: Node 6 Z-Wave Volts Set to 231,39 (231,39 Volts)
apr-30 10:35:21 Device Control Device: 1. etg Gang Varmekabler, Switch to Off (0) by/from: CAPI Control Handler
apr-30 10:35:21 Device Control Device: 2. etg Stue Ovn TV, Switch to Off (0) by/from: CAPI Control Handler
apr-30 10:35:21 Device Control Device: 2. etg Stue Ovn Vindu, Switch to Off (0) by/from: CAPI Control Handler
apr-30 10:34:19 Z-Wave Device: Node 8 Z-Wave Volts Set to 233,77 (233,77 Volts)
apr-30 10:30:26 Z-Wave Device: Node 6 Z-Wave Volts Set to 233,66 (233,66 Volts)
apr-30 10:30:21 Device Control Device: 1. etg Gang Varmekabler, Switch to Off (0) by/from: CAPI Control Handler
apr-30 10:30:21 Device Control Device: 2. etg Stue Ovn TV, Switch to Off (0) by/from: CAPI Control Handler
apr-30 10:30:21 Device Control Device: 2. etg Stue Ovn Vindu, Switch to Off (0) by/from: CAPI Control Handler
apr-30 10:29:19 Z-Wave Device: Node 8 Z-Wave Volts Set to 232,89 (232,89 Volts)
apr-30 10:25:26 Z-Wave Device: Node 6 Z-Wave Volts Set to 233,41 (233,41 Volts)
apr-30 10:25:21 Device Control Device: 1. etg Gang Varmekabler, Switch to Off (0) by/from: CAPI Control Handler
apr-30 10:25:21 Device Control Device: 2. etg Stue Ovn TV, Switch to Off (0) by/from: CAPI Control Handler
apr-30 10:25:21 Device Control Device: 2. etg Stue Ovn Vindu, Switch to Off (0) by/from: CAPI Control Handler
apr-30 10:24:36 Buienradar Incorrect amount of data received from Buienradar: (since 29.04.2018 22:17:16)
apr-30 10:24:19 Z-Wave Device: Node 8 Z-Wave Volts Set to 233,33 (233,33 Volts)
apr-30 10:20:26 Z-Wave Device: Node 6 Z-Wave Volts Set to 231,92 (231,92 Volts)
apr-30 10:20:21 Device Control Device: 1. etg Gang Varmekabler, Switch to Off (0) by/from: CAPI Control Handler
apr-30 10:20:21 Device Control Device: 2. etg Stue Ovn TV, Switch to Off (0) by/from: CAPI Control Handler
apr-30 10:20:21 Device Control Device: 2. etg Stue Ovn Vindu, Switch to Off (0) by/from: CAPI Control Handler
apr-30 10:19:19 Z-Wave Device: Node 8 Z-Wave Volts Set to 232,12 (232,12 Volts)
apr-30 10:15:26 Z-Wave Device: Node 6 Z-Wave Volts Set to 233,69 (233,69 Volts)
apr-30 10:15:21 Device Control Device: 1. etg Gang Varmekabler, Switch to Off (0) by/from: CAPI Control Handler
apr-30 10:15:21 Device Control Device: 2. etg Stue Ovn TV, Switch to Off (0) by/from: CAPI Control Handler
apr-30 10:15:21 Device Control Device: 2. etg Stue Ovn Vindu, Switch to Off (0) by/from: CAPI Control Handler
apr-30 10:15:00 Log Info The log database is currently 2,03MB in size.
apr-30 10:14:19 Z-Wave Device: Node 8 Z-Wave Volts Set to 233,24 (233,24 Volts)
apr-30 10:10:26 Z-Wave Device: Node 6 Z-Wave Volts Set to 231,8 (231,8 Volts)
apr-30 10:10:21 Device Control Device: 1. etg Gang Varmekabler, Switch to Off (0) by/from: CAPI Control Handler
apr-30 10:10:21 Device Control Device: 2. etg Stue Ovn TV, Switch to Off (0) by/from: CAPI Control Handler
apr-30 10:10:21 Device Control Device: 2. etg Stue Ovn Vindu, Switch to Off (0) by/from: CAPI Control Handler
apr-30 10:09:34 Buienradar Incorrect amount of data received from Buienradar: (since 29.04.2018 22:17:16)
apr-30 10:09:31 Z-Wave Device: Node 3 Z-Wave Luminance Set to 90 (Lux)
apr-30 10:09:29 Event Running script statement immediately: &hs.setDeviceValueByRef(141,hs.DeviceValueEx(17),True)
apr-30 10:09:29 Event Running script statement immediately: &hs.setDeviceValueByRef(124,hs.DeviceValueEx(17),True)
apr-30 10:09:29 Event Event Trigger "Varmekontroll Stue_temp_RFXCOM"
apr-30 10:09:29 Z-Wave Device: 2. etg Stue Temp, Sensor Set to 23,1 (C)
apr-30 10:09:19 Z-Wave Device: Node 8 Z-Wave Volts Set to 231,36 (231,36 Volts)
apr-30 10:05:26 Z-Wave Device: Node 6 Z-Wave Volts Set to 232,44 (232,44 Volts)
apr-30 10:05:21 Device Control Device: 1. etg Gang Varmekabler, Switch to Off (0) by/from: CAPI Control Handler
apr-30 10:05:21 Device Control Device: 2. etg Stue Ovn TV, Switch to Off (0) by/from: CAPI Control Handler
apr-30 10:05:21 Device Control Device: 2. etg Stue Ovn Vindu, Switch to Off (0) by/from: CAPI Control Handler
apr-30 10:04:19 Z-Wave Device: Node 8 Z-Wave Volts Set to 232,92 (232,92 Volts)
apr-30 10:00:26 Z-Wave Device: Node 6 Z-Wave Volts Set to 233,96 (233,96 Volts)
apr-30 10:00:21 Device Control Device: 1. etg Gang Varmekabler, Switch to Off (0) by/from: CAPI Control Handler
apr-30 10:00:21 Device Control Device: 2. etg Stue Ovn TV, Switch to Off (0) by/from: CAPI Control Handler
apr-30 10:00:21 Device Control Device: 2. etg Stue Ovn Vindu, Switch to Off (0) by/from: CAPI Control Handler
apr-30 09:59:19 Z-Wave Device: Node 8 Z-Wave Volts Set to 233,85 (233,85 Volts)
apr-30 09:55:26 Z-Wave Device: Node 6 Z-Wave Volts Set to 236,04 (236,04 Volts)
apr-30 09:55:21 Device Control Device: 1. etg Gang Varmekabler, Switch to Off (0) by/from: CAPI Control Handler
apr-30 09:55:21 Device Control Device: 2. etg Stue Ovn TV, Switch to Off (0) by/from: CAPI Control Handler
apr-30 09:55:21 Device Control Device: 2. etg Stue Ovn Vindu, Switch to Off (0) by/from: CAPI Control Handler
apr-30 09:54:31 Buienradar Incorrect amount of data received from Buienradar: (since 29.04.2018 22:17:16)
apr-30 09:54:19 Z-Wave Device: Node 8 Z-Wave Volts Set to 237,43 (237,43 Volts)
apr-30 09:50:26 Z-Wave Device: Node 6 Z-Wave Volts Set to 236,24 (236,24 Volts)
apr-30 09:50:21 Device Control Device: 1. etg Gang Varmekabler, Switch to Off (0) by/from: CAPI Control Handler
apr-30 09:50:20 Device Control Device: 2. etg Stue Ovn TV, Switch to Off (0) by/from: CAPI Control Handler
apr-30 09:50:20 Device Control Device: 2. etg Stue Ovn Vindu, Switch to Off (0) by/from: CAPI Control Handler
apr-30 09:49:19 Z-Wave Device: Node 8 Z-Wave Volts Set to 236,29 (236,29 Volts)
apr-30 09:45:26 Z-Wave Device: Node 6 Z-Wave Volts Set to 236,18 (236,18 Volts)
apr-30 09:45:20 Device Control Device: 1. etg Gang Varmekabler, Switch to Off (0) by/from: CAPI Control Handler
apr-30 09:45:20 Device Control Device: 2. etg Stue Ovn TV, Switch to Off (0) by/from: CAPI Control Handler
apr-30 09:45:20 Device Control Device: 2. etg Stue Ovn Vindu, Switch to Off (0) by/from: CAPI Control Handler
apr-30 09:44:19 Z-Wave Device: Node 8 Z-Wave Volts Set to 234,9 (234,9 Volts)
apr-30 09:40:26 Z-Wave Device: Node 6 Z-Wave Volts Set to 235,2 (235,2 Volts)
apr-30 09:40:20 Device Control Device: 1. etg Gang Varmekabler, Switch to Off (0) by/from: CAPI Control Handler
apr-30 09:40:20 Device Control Device: 2. etg Stue Ovn TV, Switch to Off (0) by/from: CAPI Control Handler
apr-30 09:40:20 Device Control Device: 2. etg Stue Ovn Vindu, Switch to Off (0) by/from: CAPI Control Handler
apr-30 09:39:28 Buienradar Incorrect amount of data received from Buienradar: (since 29.04.2018 22:17:16)
apr-30 09:39:19 Z-Wave Device: Node 8 Z-Wave Volts Set to 234,63 (234,63 Volts)
apr-30 09:35:26 Z-Wave Device: Node 6 Z-Wave Volts Set to 234,58 (234,58 Volts)
apr-30 09:35:20 Device Control Device: 1. etg Gang Varmekabler, Switch to Off (0) by/from: CAPI Control Handler
apr-30 09:35:20 Device Control Device: 2. etg Stue Ovn TV, Switch to Off (0) by/from: CAPI Control Handler
apr-30 09:35:20 Device Control Device: 2. etg Stue Ovn Vindu, Switch to Off (0) by/from: CAPI Control Handler
apr-30 09:34:18 Z-Wave Device: Node 8 Z-Wave Volts Set to 234,82 (234,82 Volts)
apr-30 09:30:26 Z-Wave Device: Node 6 Z-Wave Volts Set to 236,27 (236,27 Volts)
apr-30 09:30:20 Device Control Device: 1. etg Gang Varmekabler, Switch to Off (0) by/from: CAPI Control Handler
apr-30 09:30:20 Device Control Device: 2. etg Stue Ovn TV, Switch to Off (0) by/from: CAPI Control Handler
apr-30 09:30:20 Device Control Device: 2. etg Stue Ovn Vindu, Switch to Off (0) by/from: CAPI Control Handler
apr-30 09:29:19 Z-Wave Device: Node 8 Z-Wave Volts Set to 235,57 (235,57 Volts)
apr-30 09:27:39 Z-Wave Device: Node 2 Z-Wave Luminance Set to 3 (Lux)
apr-30 09:27:38 Z-Wave Device: 1. etg Gang Luftfuktighet, Sensor Set to 25 (%)
apr-30 09:25:26 Z-Wave Device: Node 6 Z-Wave Volts Set to 233,32 (233,32 Volts)
apr-30 09:25:20 Device Control Device: 1. etg Gang Varmekabler, Switch to Off (0) by/from: CAPI Control Handler
apr-30 09:25:20 Device Control Device: 2. etg Stue Ovn TV, Switch to Off (0) by/from: CAPI Control Handler
apr-30 09:25:20 Device Control Device: 2. etg Stue Ovn Vindu, Switch to Off (0) by/from: CAPI Control Handler
apr-30 09:24:26 Buienradar Incorrect amount of data received from Buienradar: (since 29.04.2018 22:17:16)
apr-30 09:24:19 Z-Wave Device: Node 8 Z-Wave Volts Set to 234,67 (234,67 Volts)
apr-30 09:20:26 Z-Wave Device: Node 6 Z-Wave Volts Set to 236,38 (236,38 Volts)
apr-30 09:20:20 Device Control Device: 1. etg Gang Varmekabler, Switch to Off (0) by/from: CAPI Control Handler
apr-30 09:20:20 Device Control Device: 2. etg Stue Ovn TV, Switch to Off (0) by/from: CAPI Control Handler
apr-30 09:20:20 Device Control Device: 2. etg Stue Ovn Vindu, Switch to Off (0) by/from: CAPI Control Handler
apr-30 09:19:19 Z-Wave Device: Node 8 Z-Wave Volts Set to 235,09 (235,09 Volts)
apr-30 09:15:26 Z-Wave Device: Node 6 Z-Wave Volts Set to 235,84 (235,84 Volts)
apr-30 09:15:20 Device Control Device: 1. etg Gang Varmekabler, Switch to Off (0) by/from: CAPI Control Handler
apr-30 09:15:20 Device Control Device: 2. etg Stue Ovn TV, Switch to Off (0) by/from: CAPI Control Handler
apr-30 09:15:20 Device Control Device: 2. etg Stue Ovn Vindu, Switch to Off (0) by/from: CAPI Control Handler
apr-30 09:14:19 Z-Wave Device: Node 8 Z-Wave Volts Set to 235,38 (235,38 Volts)
apr-30 09:10:26 Z-Wave Device: Node 6 Z-Wave Volts Set to 234,63 (234,63 Volts)
apr-30 09:10:20 Device Control Device: 1. etg Gang Varmekabler, Switch to Off (0) by/from: CAPI Control Handler
apr-30 09:10:20 Device Control Device: 2. etg Stue Ovn TV, Switch to Off (0) by/from: CAPI Control Handler
apr-30 09:10:20 Device Control Device: 2. etg Stue Ovn Vindu, Switch to Off (0) by/from: CAPI Control Handler
apr-30 09:09:29 Z-Wave Device: Node 3 Z-Wave Luminance Set to 123 (Lux)
apr-30 09:09:23 Buienradar Incorrect amount of data received from Buienradar: (since 29.04.2018 22:17:16)
apr-30 09:09:19 Z-Wave Device: Node 8 Z-Wave Volts Set to 235,18 (235,18 Volts)
apr-30 09:06:00 Energy DB Info All energy database compacting routines completed.
apr-30 09:06:00 Energy DB Database is 0,1494141 MB in size. No further compaction needed.
apr-30 09:06:00 Energy DB Info Compacting remaining data...
apr-30 09:06:00 Energy DB Info Compacting data older than 4 months...
apr-30 09:06:00 Energy DB Info Compacting data older than 1 year...
apr-30 09:06:00 Energy DB Info Compacting data older than 3 years...
apr-30 09:06:00 Energy DB Info Compacting data older than 5 years...
apr-30 09:06:00 Energy DB Info Compacting data older than 10 years...
apr-30 09:06:00 Energy DB Info Energy database compaction initiated.
apr-30 09:05:26 Z-Wave Device: Node 6 Z-Wave Volts Set to 234,41 (234,41 Volts)
apr-30 09:05:20 Device Control Device: 1. etg Gang Varmekabler, Switch to Off (0) by/from: CAPI Control Handler
apr-30 09:05:20 Device Control Device: 2. etg Stue Ovn TV, Switch to Off (0) by/from: CAPI Control Handler
apr-30 09:05:20 Device Control Device: 2. etg Stue Ovn Vindu, Switch to Off (0) by/from: CAPI Control Handler
apr-30 09:04:19 Z-Wave Device: Node 8 Z-Wave Volts Set to 234,9 (234,9 Volts)
apr-30 09:00:26 Z-Wave Device: Node 6 Z-Wave Volts Set to 236,24 (236,24 Volts)
apr-30 09:00:20 Device Control Device: 1. etg Gang Varmekabler, Switch to Off (0) by/from: CAPI Control Handler
apr-30 09:00:20 Device Control Device: 2. etg Stue Ovn TV, Switch to Off (0) by/from: CAPI Control Handler
apr-30 09:00:20 Device Control Device: 2. etg Stue Ovn Vindu, Switch to Off (0) by/from: CAPI Control Handler
apr-30 08:59:19 Z-Wave Device: Node 8 Z-Wave Volts Set to 234,84 (234,84 Volts)
apr-30 08:55:26 Z-Wave Device: Node 6 Z-Wave Volts Set to 235,22 (235,22 Volts)
apr-30 08:55:20 Device Control Device: 1. etg Gang Varmekabler, Switch to Off (0) by/from: CAPI Control Handler
apr-30 08:55:20 Device Control Device: 2. etg Stue Ovn TV, Switch to Off (0) by/from: CAPI Control Handler
apr-30 08:55:20 Device Control Device: 2. etg Stue Ovn Vindu, Switch to Off (0) by/from: CAPI Control Handler
apr-30 08:54:20 Buienradar Incorrect amount of data received from Buienradar: (since 29.04.2018 22:17:16)
apr-30 08:54:19 Z-Wave Device: Node 8 Z-Wave Volts Set to 233,85 (233,85 Volts)
apr-30 08:50:26 Z-Wave Device: Node 6 Z-Wave Volts Set to 233,08 (233,08 Volts)
apr-30 08:50:20 Device Control Device: 1. etg Gang Varmekabler, Switch to Off (0) by/from: CAPI Control Handler
apr-30 08:50:20 Device Control Device: 2. etg Stue Ovn TV, Switch to Off (0) by/from: CAPI Control Handler
apr-30 08:50:20 Device Control Device: 2. etg Stue Ovn Vindu, Switch to Off (0) by/from: CAPI Control Handler
apr-30 08:49:18 Z-Wave Device: Node 8 Z-Wave Volts Set to 233,84 (233,84 Volts)
apr-30 08:45:26 Z-Wave Device: Node 6 Z-Wave Volts Set to 234,13 (234,13 Volts)
apr-30 08:45:20 Device Control Device: 1. etg Gang Varmekabler, Switch to Off (0) by/from: CAPI Control Handler
apr-30 08:45:20 Device Control Device: 2. etg Stue Ovn TV, Switch to Off (0) by/from: CAPI Control Handler
apr-30 08:45:20 Device Control Device: 2. etg Stue Ovn Vindu, Switch to Off (0) by/from: CAPI Control Handler
apr-30 08:44:18 Z-Wave Device: Node 8 Z-Wave Volts Set to 232,39 (232,39 Volts)
apr-30 08:40:26 Z-Wave Device: Node 6 Z-Wave Volts Set to 236,27 (236,27 Volts)
apr-30 08:40:20 Device Control Device: 1. etg Gang Varmekabler, Switch to Off (0) by/from: CAPI Control Handler
apr-30 08:40:20 Device Control Device: 2. etg Stue Ovn TV, Switch to Off (0) by/from: CAPI Control Handler
apr-30 08:40:20 Device Control Device: 2. etg Stue Ovn Vindu, Switch to Off (0) by/from: CAPI Control Handler
apr-30 08:39:18 Z-Wave Device: Node 8 Z-Wave Volts Set to 233,37 (233,37 Volts)
apr-30 08:39:18 Buienradar Incorrect amount of data received from Buienradar: (since 29.04.2018 22:17:16)
apr-30 08:35:26 Z-Wave Device: Node 6 Z-Wave Volts Set to 233,26 (233,26 Volts)
apr-30 08:35:20 Device Control Device: 1. etg Gang Varmekabler, Switch to Off (0) by/from: CAPI Control Handler
apr-30 08:35:20 Device Control Device: 2. etg Stue Ovn TV, Switch to Off (0) by/from: CAPI Control Handler
apr-30 08:35:20 Device Control Device: 2. etg Stue Ovn Vindu, Switch to Off (0) by/from: CAPI Control Handler
apr-30 08:34:18 Z-Wave Device: Node 8 Z-Wave Volts Set to 234,11 (234,11 Volts)
apr-30 08:30:26 Z-Wave Device: Node 6 Z-Wave Volts Set to 231,16 (231,16 Volts)
apr-30 08:30:20 Device Control Device: 1. etg Gang Varmekabler, Switch to Off (0) by/from: CAPI Control Handler
apr-30 08:30:20 Device Control Device: 2. etg Stue Ovn TV, Switch to Off (0) by/from: CAPI Control Handler
apr-30 08:30:20 Device Control Device: 2. etg Stue Ovn Vindu, Switch to Off (0) by/from: CAPI Control Handler
apr-30 08:29:18 Z-Wave Device: Node 8 Z-Wave Volts Set to 233,14 (233,14 Volts)
apr-30 08:27:37 Z-Wave Device: Node 2 Z-Wave Luminance Set to 4 (Lux)
apr-30 08:25:26 Z-Wave Device: Node 6 Z-Wave Volts Set to 233,48 (233,48 Volts)
apr-30 08:25:20 Device Control Device: 1. etg Gang Varmekabler, Switch to Off (0) by/from: CAPI Control Handler
apr-30 08:25:20 Device Control Device: 2. etg Stue Ovn TV, Switch to Off (0) by/from: CAPI Control Handler
apr-30 08:25:20 Device Control Device: 2. etg Stue Ovn Vindu, Switch to Off (0) by/from: CAPI Control Handler
apr-30 08:24:18 Z-Wave Device: Node 8 Z-Wave Volts Set to 231,42 (231,42 Volts)
apr-30 08:24:14 Buienradar Incorrect amount of data received from Buienradar: (since 29.04.2018 22:17:16)
apr-30 08:20:26 Z-Wave Device: Node 6 Z-Wave Volts Set to 232,03 (232,03 Volts)
apr-30 08:20:20 Device Control Device: 1. etg Gang Varmekabler, Switch to Off (0) by/from: CAPI Control Handler
apr-30 08:20:20 Device Control Device: 2. etg Stue Ovn TV, Switch to Off (0) by/from: CAPI Control Handler
apr-30 08:20:20 Device Control Device: 2. etg Stue Ovn Vindu, Switch to Off (0) by/from: CAPI Control Handler
apr-30 08:19:18 Z-Wave Device: Node 8 Z-Wave Volts Set to 232,42 (232,42 Volts)
apr-30 08:15:26 Z-Wave Device: Node 6 Z-Wave Volts Set to 233,47 (233,47 Volts)
apr-30 08:15:20 Device Control Device: 1. etg Gang Varmekabler, Switch to Off (0) by/from: CAPI Control Handler
apr-30 08:15:20 Device Control Device: 2. etg Stue Ovn TV, Switch to Off (0) by/from: CAPI Control Handler
apr-30 08:15:20 Device Control Device: 2. etg Stue Ovn Vindu, Switch to Off (0) by/from: CAPI Control Handler
apr-30 08:14:18 Z-Wave Device: Node 8 Z-Wave Volts Set to 233,05 (233,05 Volts)
apr-30 08:10:26 Z-Wave Device: Node 6 Z-Wave Volts Set to 231,15 (231,15 Volts)
apr-30 08:10:20 Device Control Device: 1. etg Gang Varmekabler, Switch to Off (0) by/from: CAPI Control Handler
apr-30 08:10:20 Device Control Device: 2. etg Stue Ovn TV, Switch to Off (0) by/from: CAPI Control Handler
apr-30 08:10:20 Device Control Device: 2. etg Stue Ovn Vindu, Switch to Off (0) by/from: CAPI Control Handler
apr-30 08:09:28 Z-Wave Device: Node 3 Z-Wave Luminance Set to 132 (Lux)
apr-30 08:09:18 Z-Wave Device: Node 8 Z-Wave Volts Set to 230,58 (230,58 Volts)
apr-30 08:09:11 Buienradar Incorrect amount of data received from Buienradar: (since 29.04.2018 22:17:16)
apr-30 08:05:26 Z-Wave Device: Node 6 Z-Wave Volts Set to 233,17 (233,17 Volts)
apr-30 08:05:20 Device Control Device: 1. etg Gang Varmekabler, Switch to Off (0) by/from: CAPI Control Handler
apr-30 08:05:20 Device Control Device: 2. etg Stue Ovn TV, Switch to Off (0) by/from: CAPI Control Handler
apr-30 08:05:20 Device Control Device: 2. etg Stue Ovn Vindu, Switch to Off (0) by/from: CAPI Control Handler
apr-30 08:04:17 Z-Wave Device: Node 8 Z-Wave Volts Set to 233,67 (233,67 Volts)
apr-30 08:00:26 Z-Wave Device: Node 6 Z-Wave Volts Set to 230,99 (230,99 Volts)
apr-30 08:00:20 Device Control Device: 1. etg Gang Varmekabler, Switch to Off (0) by/from: CAPI Control Handler
apr-30 08:00:20 Device Control Device: 2. etg Stue Ovn TV, Switch to Off (0) by/from: CAPI Control Handler
apr-30 08:00:20 Device Control Device: 2. etg Stue Ovn Vindu, Switch to Off (0) by/from: CAPI Control Handler
apr-30 07:59:17 Z-Wave Device: Node 8 Z-Wave Volts Set to 230,4 (230,4 Volts)
apr-30 07:55:26 Z-Wave Device: Node 6 Z-Wave Volts Set to 231,24 (231,24 Volts)
apr-30 07:55:20 Device Control Device: 1. etg Gang Varmekabler, Switch to Off (0) by/from: CAPI Control Handler
apr-30 07:55:20 Device Control Device: 2. etg Stue Ovn TV, Switch to Off (0) by/from: CAPI Control Handler
apr-30 07:55:20 Device Control Device: 2. etg Stue Ovn Vindu, Switch to Off (0) by/from: CAPI Control Handler
apr-30 07:54:17 Z-Wave Device: Node 8 Z-Wave Volts Set to 232,91 (232,91 Volts)
apr-30 07:54:09 Buienradar Incorrect amount of data received from Buienradar: (since 29.04.2018 22:17:16)
apr-30 07:50:26 Z-Wave Device: Node 6 Z-Wave Volts Set to 234,28 (234,28 Volts)
apr-30 07:50:20 Device Control Device: 1. etg Gang Varmekabler, Switch to Off (0) by/from: CAPI Control Handler
apr-30 07:50:20 Device Control Device: 2. etg Stue Ovn TV, Switch to Off (0) by/from: CAPI Control Handler
apr-30 07:50:20 Device Control Device: 2. etg Stue Ovn Vindu, Switch to Off (0) by/from: CAPI Control Handler
apr-30 07:49:17 Z-Wave Device: Node 8 Z-Wave Volts Set to 232 (232 Volts)
apr-30 07:45:26 Z-Wave Device: Node 6 Z-Wave Volts Set to 232,49 (232,49 Volts)
apr-30 07:45:20 Device Control Device: 1. etg Gang Varmekabler, Switch to Off (0) by/from: CAPI Control Handler
apr-30 07:45:20 Device Control Device: 2. etg Stue Ovn TV, Switch to Off (0) by/from: CAPI Control Handler
apr-30 07:45:20 Device Control Device: 2. etg Stue Ovn Vindu, Switch to Off (0) by/from: CAPI Control Handler
apr-30 07:44:17 Z-Wave Device: Node 8 Z-Wave Volts Set to 233,77 (233,77 Volts)
apr-30 07:40:26 Z-Wave Device: Node 6 Z-Wave Volts Set to 236,16 (236,16 Volts)
apr-30 07:40:20 Device Control Device: 1. etg Gang Varmekabler, Switch to Off (0) by/from: CAPI Control Handler
apr-30 07:40:20 Device Control Device: 2. etg Stue Ovn TV, Switch to Off (0) by/from: CAPI Control Handler
apr-30 07:40:20 Device Control Device: 2. etg Stue Ovn Vindu, Switch to Off (0) by/from: CAPI Control Handler
apr-30 07:39:17 Z-Wave Device: Node 8 Z-Wave Volts Set to 235,12 (235,12 Volts)
apr-30 07:39:06 Buienradar Incorrect amount of data received from Buienradar: (since 29.04.2018 22:17:16)
apr-30 07:35:26 Z-Wave Device: Node 6 Z-Wave Volts Set to 233,72 (233,72 Volts)
apr-30 07:35:20 Device Control Device: 1. etg Gang Varmekabler, Switch to Off (0) by/from: CAPI Control Handler
apr-30 07:35:20 Device Control Device: 2. etg Stue Ovn TV, Switch to Off (0) by/from: CAPI Control Handler
apr-30 07:35:20 Device Control Device: 2. etg Stue Ovn Vindu, Switch to Off (0) by/from: CAPI Control Handler
apr-30 07:34:17 Z-Wave Device: Node 8 Z-Wave Volts Set to 234,12 (234,12 Volts)
apr-30 07:30:26 Z-Wave Device: Node 6 Z-Wave Volts Set to 234,28 (234,28 Volts)
apr-30 07:30:20 Device Control Device: 1. etg Gang Varmekabler, Switch to Off (0) by/from: CAPI Control Handler
apr-30 07:30:20 Device Control Device: 2. etg Stue Ovn TV, Switch to Off (0) by/from: CAPI Control Handler
apr-30 07:30:20 Device Control Device: 2. etg Stue Ovn Vindu, Switch to Off (0) by/from: CAPI Control Handler
apr-30 07:29:17 Z-Wave Device: Node 8 Z-Wave Volts Set to 234,35 (234,35 Volts)
apr-30 07:27:36 Z-Wave Device: Node 2 Z-Wave Luminance Set to 7 (Lux)
apr-30 07:25:26 Z-Wave Device: Node 6 Z-Wave Volts Set to 236,25 (236,25 Volts)
apr-30 07:25:20 Device Control Device: 1. etg Gang Varmekabler, Switch to Off (0) by/from: CAPI Control Handler
apr-30 07:25:20 Device Control Device: 2. etg Stue Ovn TV, Switch to Off (0) by/from: CAPI Control Handler
apr-30 07:25:20 Device Control Device: 2. etg Stue Ovn Vindu, Switch to Off (0) by/from: CAPI Control Handler
apr-30 07:24:17 Z-Wave Device: Node 8 Z-Wave Volts Set to 232,88 (232,88 Volts)
apr-30 07:24:03 Buienradar Incorrect amount of data received from Buienradar: (since 29.04.2018 22:17:16)
apr-30 07:20:26 Z-Wave Device: Node 6 Z-Wave Volts Set to 233,23 (233,23 Volts)
apr-30 07:20:20 Device Control Device: 1. etg Gang Varmekabler, Switch to Off (0) by/from: CAPI Control Handler
apr-30 07:20:20 Device Control Device: 2. etg Stue Ovn TV, Switch to Off (0) by/from: CAPI Control Handler
apr-30 07:20:20 Device Control Device: 2. etg Stue Ovn Vindu, Switch to Off (0) by/from: CAPI Control Handler
apr-30 07:19:16 Z-Wave Device: Node 8 Z-Wave Volts Set to 231,9 (231,9 Volts)
apr-30 07:15:26 Z-Wave Device: Node 6 Z-Wave Volts Set to 230,62 (230,62 Volts)
apr-30 07:15:20 Device Control Device: 1. etg Gang Varmekabler, Switch to Off (0) by/from: CAPI Control Handler
apr-30 07:15:20 Device Control Device: 2. etg Stue Ovn TV, Switch to Off (0) by/from: CAPI Control Handler
apr-30 07:15:20 Device Control Device: 2. etg Stue Ovn Vindu, Switch to Off (0) by/from: CAPI Control Handler
apr-30 07:15:00 Log Info The log database is currently 1,93MB in size.
apr-30 07:14:16 Z-Wave Device: Node 8 Z-Wave Volts Set to 234,79 (234,79 Volts)
apr-30 07:10:26 Z-Wave Device: Node 6 Z-Wave Volts Set to 237,11 (237,11 Volts)
apr-30 07:10:20 Device Control Device: 1. etg Gang Varmekabler, Switch to Off (0) by/from: CAPI Control Handler
apr-30 07:10:19 Device Control Device: 2. etg Stue Ovn TV, Switch to Off (0) by/from: CAPI Control Handler
apr-30 07:10:19 Device Control Device: 2. etg Stue Ovn Vindu, Switch to Off (0) by/from: CAPI Control Handler
apr-30 07:09:26 Z-Wave Device: Node 3 Z-Wave Luminance Set to 79 (Lux)
apr-30 07:09:25 Z-Wave Device: 2. etg Stue Luftfuktighet, Sensor Set to 24 (%)
apr-30 07:09:25 Event Running script statement immediately: &hs.setDeviceValueByRef(141,hs.DeviceValueEx(17),True)
apr-30 07:09:25 Event Running script statement immediately: &hs.setDeviceValueByRef(124,hs.DeviceValueEx(17),True)
apr-30 07:09:25 Event Event Trigger "Varmekontroll Stue_temp_RFXCOM"
apr-30 07:09:25 Z-Wave Device: 2. etg Stue Temp, Sensor Set to 23 (C)
apr-30 07:09:16 Z-Wave Device: Node 8 Z-Wave Volts Set to 233,6 (233,6 Volts)
apr-30 07:09:00 Buienradar Incorrect amount of data received from Buienradar: (since 29.04.2018 22:17:16)
apr-30 07:05:26 Z-Wave Device: Node 6 Z-Wave Volts Set to 235,46 (235,46 Volts)
apr-30 07:05:19 Device Control Device: 1. etg Gang Varmekabler, Switch to Off (0) by/from: CAPI Control Handler
apr-30 07:05:19 Device Control Device: 2. etg Stue Ovn TV, Switch to Off (0) by/from: CAPI Control Handler
apr-30 07:05:19 Device Control Device: 2. etg Stue Ovn Vindu, Switch to Off (0) by/from: CAPI Control Handler
apr-30 07:04:16 Z-Wave Device: Node 8 Z-Wave Volts Set to 236,3 (236,3 Volts)
apr-30 07:00:26 Z-Wave Device: Node 6 Z-Wave Volts Set to 235,21 (235,21 Volts)
apr-30 07:00:19 Device Control Device: 1. etg Gang Varmekabler, Switch to Off (0) by/from: CAPI Control Handler
apr-30 07:00:19 Device Control Device: 2. etg Stue Ovn TV, Switch to Off (0) by/from: CAPI Control Handler
apr-30 07:00:19 Device Control Device: 2. etg Stue Ovn Vindu, Switch to Off (0) by/from: CAPI Control Handler
apr-30 06:59:16 Z-Wave Device: Node 8 Z-Wave Volts Set to 233,29 (233,29 Volts)
apr-30 06:55:26 Z-Wave Device: Node 6 Z-Wave Volts Set to 231,97 (231,97 Volts)
apr-30 06:55:19 Device Control Device: 1. etg Gang Varmekabler, Switch to Off (0) by/from: CAPI Control Handler
apr-30 06:55:19 Device Control Device: 2. etg Stue Ovn TV, Switch to Off (0) by/from: CAPI Control Handler
apr-30 06:55:19 Device Control Device: 2. etg Stue Ovn Vindu, Switch to Off (0) by/from: CAPI Control Handler
apr-30 06:54:16 Z-Wave Device: Node 8 Z-Wave Volts Set to 233,14 (233,14 Volts)
apr-30 06:53:57 Buienradar Incorrect amount of data received from Buienradar: (since 29.04.2018 22:17:16)
apr-30 06:50:26 Z-Wave Device: Node 6 Z-Wave Volts Set to 232,45 (232,45 Volts)
apr-30 06:50:19 Device Control Device: 1. etg Gang Varmekabler, Switch to Off (0) by/from: CAPI Control Handler
apr-30 06:50:19 Device Control Device: 2. etg Stue Ovn TV, Switch to Off (0) by/from: CAPI Control Handler
apr-30 06:50:19 Device Control Device: 2. etg Stue Ovn Vindu, Switch to Off (0) by/from: CAPI Control Handler
apr-30 06:49:16 Z-Wave Device: Node 8 Z-Wave Volts Set to 230,69 (230,69 Volts)
apr-30 06:45:26 Z-Wave Device: Node 6 Z-Wave Volts Set to 232,52 (232,52 Volts)
apr-30 06:45:19 Device Control Device: 1. etg Gang Varmekabler, Switch to Off (0) by/from: CAPI Control Handler
apr-30 06:45:19 Device Control Device: 2. etg Stue Ovn TV, Switch to Off (0) by/from: CAPI Control Handler
apr-30 06:45:19 Device Control Device: 2. etg Stue Ovn Vindu, Switch to Off (0) by/from: CAPI Control Handler
apr-30 06:44:16 Z-Wave Device: Node 8 Z-Wave Volts Set to 232,23 (232,23 Volts)
apr-30 06:40:26 Z-Wave Device: Node 6 Z-Wave Volts Set to 231,25 (231,25 Volts)
apr-30 06:40:19 Device Control Device: 1. etg Gang Varmekabler, Switch to Off (0) by/from: CAPI Control Handler
apr-30 06:40:19 Device Control Device: 2. etg Stue Ovn TV, Switch to Off (0) by/from: CAPI Control Handler
apr-30 06:40:19 Device Control Device: 2. etg Stue Ovn Vindu, Switch to Off (0) by/from: CAPI Control Handler
apr-30 06:39:16 Z-Wave Device: Node 8 Z-Wave Volts Set to 231,27 (231,27 Volts)
apr-30 06:38:55 Buienradar Incorrect amount of data received from Buienradar: (since 29.04.2018 22:17:16)
apr-30 06:35:26 Z-Wave Device: Node 2 Z-Wave Home Security Set to NOTIFICATION for type Home Security, Event: No Event
apr-30 06:35:26 Z-Wave Device: Node 6 Z-Wave Volts Set to 232,78 (232,78 Volts)
apr-30 06:35:26 Z-Wave Device: 1. etg Gang Taklys, Dimmer Set to 0
apr-30 06:35:26 Device Control Device: 1. etg Gang Taklys, Dimmer to Off (0)
apr-30 06:35:26 Event Event Trigger "Gang Lys Gang av - Natt"
apr-30 06:35:26 Z-Wave Device: 1. etg Gang Motion, Sensor Set to Off/Closed/No Motion
apr-30 06:35:19 Device Control Device: 1. etg Gang Varmekabler, Switch to Off (0) by/from: CAPI Control Handler
apr-30 06:35:19 Device Control Device: 2. etg Stue Ovn TV, Switch to Off (0) by/from: CAPI Control Handler
apr-30 06:35:19 Device Control Device: 2. etg Stue Ovn Vindu, Switch to Off (0) by/from: CAPI Control Handler
apr-30 06:35:17 Z-Wave Device: 1. etg Gang Inngangsdør, Sensor Set to Off/Closed/No Motion
apr-30 06:35:17 Z-Wave Device: 1. etg Gang Inngangsdør, Notification Set to NOTIFICATION for type Access Control Notification, Event: Closed
apr-30 06:35:12 Z-Wave Device: 1. etg Gang Inngangsdør, Sensor Set to On/Open/Motion
apr-30 06:35:12 Z-Wave Device: 1. etg Gang Inngangsdør, Notification Set to NOTIFICATION for type Access Control Notification, Event: Open
apr-30 06:34:17 Z-Wave Device: Node 2 Z-Wave Home Security Set to NOTIFICATION for type Home Security, Event: Motion Detected
apr-30 06:34:17 Z-Wave Device: 1. etg Gang Taklys, Dimmer Set to 10
apr-30 06:34:16 Device Control Device: 1. etg Gang Taklys, Dimmer to Dim 10% (10)
apr-30 06:34:16 Event Event Trigger "Gang Lys Gang på - Natt"
apr-30 06:34:16 Z-Wave Device: 1. etg Gang Motion, Sensor Set to On/Open/Motion
apr-30 06:34:16 Z-Wave Device: Node 8 Z-Wave Volts Set to 233,45 (233,45 Volts)
apr-30 06:30:26 Z-Wave Device: Node 6 Z-Wave Volts Set to 232,91 (232,91 Volts)
apr-30 06:30:19 Device Control Device: 1. etg Gang Varmekabler, Switch to Off (0) by/from: CAPI Control Handler
apr-30 06:30:19 Device Control Device: 2. etg Stue Ovn TV, Switch to Off (0) by/from: CAPI Control Handler
apr-30 06:30:19 Device Control Device: 2. etg Stue Ovn Vindu, Switch to Off (0) by/from: CAPI Control Handler
apr-30 06:29:16 Z-Wave Device: Node 8 Z-Wave Volts Set to 233,96 (233,96 Volts)
apr-30 06:27:33 Event Running script statement immediately: &hs.setDeviceValueByRef(145,hs.DeviceValueEx(9),True)
apr-30 06:27:33 Event Event Trigger "Varmekontroll Gang_temp_RFXCOM"
apr-30 06:27:33 Z-Wave Device: 1. etg Gang Temp, Sensor Set to 23,6 (C)
apr-30 06:25:26 Z-Wave Device: Node 6 Z-Wave Volts Set to 232,37 (232,37 Volts)
apr-30 06:25:19 Device Control Device: 1. etg Gang Varmekabler, Switch to Off (0) by/from: CAPI Control Handler
apr-30 06:25:19 Device Control Device: 2. etg Stue Ovn TV, Switch to Off (0) by/from: CAPI Control Handler
apr-30 06:25:19 Device Control Device: 2. etg Stue Ovn Vindu, Switch to Off (0) by/from: CAPI Control Handler
apr-30 06:24:16 Z-Wave Device: Node 8 Z-Wave Volts Set to 233,56 (233,56 Volts)
apr-30 06:23:52 Buienradar Incorrect amount of data received from Buienradar: (since 29.04.2018 22:17:16)
apr-30 06:20:26 Z-Wave Device: Node 6 Z-Wave Volts Set to 233,02 (233,02 Volts)
apr-30 06:20:19 Device Control Device: 1. etg Gang Varmekabler, Switch to Off (0) by/from: CAPI Control Handler
apr-30 06:20:19 Device Control Device: 2. etg Stue Ovn TV, Switch to Off (0) by/from: CAPI Control Handler
apr-30 06:20:19 Device Control Device: 2. etg Stue Ovn Vindu, Switch to Off (0) by/from: CAPI Control Handler
apr-30 06:19:16 Z-Wave Device: Node 8 Z-Wave Volts Set to 233,84 (233,84 Volts)
apr-30 06:15:26 Z-Wave Device: Node 6 Z-Wave Volts Set to 234,68 (234,68 Volts)
apr-30 06:15:19 Device Control Device: 1. etg Gang Varmekabler, Switch to Off (0) by/from: CAPI Control Handler
apr-30 06:15:19 Device Control Device: 2. etg Stue Ovn TV, Switch to Off (0) by/from: CAPI Control Handler
apr-30 06:15:19 Device Control Device: 2. etg Stue Ovn Vindu, Switch to Off (0) by/from: CAPI Control Handler
apr-30 06:14:16 Z-Wave Device: Node 8 Z-Wave Volts Set to 234,58 (234,58 Volts)
apr-30 06:10:26 Z-Wave Device: Node 6 Z-Wave Volts Set to 234,62 (234,62 Volts)
apr-30 06:10:19 Device Control Device: 1. etg Gang Varmekabler, Switch to Off (0) by/from: CAPI Control Handler
apr-30 06:10:19 Device Control Device: 2. etg Stue Ovn TV, Switch to Off (0) by/from: CAPI Control Handler
apr-30 06:10:19 Device Control Device: 2. etg Stue Ovn Vindu, Switch to Off (0) by/from: CAPI Control Handler
apr-30 06:09:25 Z-Wave Device: Node 3 Z-Wave Luminance Set to 19 (Lux)
apr-30 06:09:24 Z-Wave Device: 2. etg Stue Luftfuktighet, Sensor Set to 25 (%)
apr-30 06:09:24 Event Running script statement immediately: &hs.setDeviceValueByRef(141,hs.DeviceValueEx(17),True)
apr-30 06:09:24 Event Running script statement immediately: &hs.setDeviceValueByRef(124,hs.DeviceValueEx(17),True)
apr-30 06:09:24 Event Event Trigger "Varmekontroll Stue_temp_RFXCOM"
apr-30 06:09:24 Z-Wave Device: 2. etg Stue Temp, Sensor Set to 23,1 (C)
apr-30 06:09:16 Z-Wave Device: Node 8 Z-Wave Volts Set to 234,54 (234,54 Volts)
apr-30 06:08:49 Buienradar Incorrect amount of data received from Buienradar: (since 29.04.2018 22:17:16)
apr-30 06:05:26 Z-Wave Device: Node 6 Z-Wave Volts Set to 230,94 (230,94 Volts)
apr-30 06:05:19 Device Control Device: 1. etg Gang Varmekabler, Switch to Off (0) by/from: CAPI Control Handler
apr-30 06:05:19 Device Control Device: 2. etg Stue Ovn TV, Switch to Off (0) by/from: CAPI Control Handler
apr-30 06:05:19 Device Control Device: 2. etg Stue Ovn Vindu, Switch to Off (0) by/from: CAPI Control Handler
apr-30 06:04:16 Z-Wave Device: Node 8 Z-Wave Volts Set to 231,96 (231,96 Volts)
apr-30 06:00:26 Z-Wave Device: Node 6 Z-Wave Volts Set to 233,35 (233,35 Volts)
apr-30 06:00:19 Device Control Device: 1. etg Gang Varmekabler, Switch to Off (0) by/from: CAPI Control Handler
apr-30 06:00:19 Device Control Device: 2. etg Stue Ovn TV, Switch to Off (0) by/from: CAPI Control Handler
apr-30 06:00:19 Device Control Device: 2. etg Stue Ovn Vindu, Switch to Off (0) by/from: CAPI Control Handler
apr-30 05:59:16 Z-Wave Device: Node 8 Z-Wave Volts Set to 232,89 (232,89 Volts)
apr-30 05:55:26 Z-Wave Device: Node 6 Z-Wave Volts Set to 232,46 (232,46 Volts)
apr-30 05:55:19 Device Control Device: 1. etg Gang Varmekabler, Switch to Off (0) by/from: CAPI Control Handler
apr-30 05:55:19 Device Control Device: 2. etg Stue Ovn TV, Switch to Off (0) by/from: CAPI Control Handler
apr-30 05:55:19 Device Control Device: 2. etg Stue Ovn Vindu, Switch to Off (0) by/from: CAPI Control Handler
apr-30 05:54:16 Z-Wave Device: Node 8 Z-Wave Volts Set to 231,7 (231,7 Volts)
apr-30 05:53:46 Buienradar Incorrect amount of data received from Buienradar: (since 29.04.2018 22:17:16)
apr-30 05:50:26 Z-Wave Device: Node 6 Z-Wave Volts Set to 232,13 (232,13 Volts)
apr-30 05:50:19 Device Control Device: 1. etg Gang Varmekabler, Switch to Off (0) by/from: CAPI Control Handler
apr-30 05:50:19 Device Control Device: 2. etg Stue Ovn TV, Switch to Off (0) by/from: CAPI Control Handler
apr-30 05:50:19 Device Control Device: 2. etg Stue Ovn Vindu, Switch to Off (0) by/from: CAPI Control Handler
apr-30 05:49:15 Z-Wave Device: Node 8 Z-Wave Volts Set to 231,95 (231,95 Volts)
apr-30 05:45:26 Z-Wave Device: Node 6 Z-Wave Volts Set to 232,61 (232,61 Volts)
apr-30 05:45:19 Device Control Device: 1. etg Gang Varmekabler, Switch to Off (0) by/from: CAPI Control Handler
apr-30 05:45:19 Device Control Device: 2. etg Stue Ovn TV, Switch to Off (0) by/from: CAPI Control Handler
apr-30 05:45:19 Device Control Device: 2. etg Stue Ovn Vindu, Switch to Off (0) by/from: CAPI Control Handler
apr-30 05:44:15 Z-Wave Device: Node 8 Z-Wave Volts Set to 231,25 (231,25 Volts)
apr-30 05:40:26 Z-Wave Device: Node 6 Z-Wave Volts Set to 234,37 (234,37 Volts)
apr-30 05:40:19 Device Control Device: 1. etg Gang Varmekabler, Switch to Off (0) by/from: CAPI Control Handler
apr-30 05:40:19 Device Control Device: 2. etg Stue Ovn TV, Switch to Off (0) by/from: CAPI Control Handler
apr-30 05:40:19 Device Control Device: 2. etg Stue Ovn Vindu, Switch to Off (0) by/from: CAPI Control Handler
apr-30 05:39:15 Z-Wave Device: Node 8 Z-Wave Volts Set to 234,13 (234,13 Volts)
apr-30 05:38:43 Buienradar Incorrect amount of data received from Buienradar: (since 29.04.2018 22:17:16)
apr-30 05:35:26 Z-Wave Device: Node 6 Z-Wave Volts Set to 232,85 (232,85 Volts)
apr-30 05:35:19 Device Control Device: 1. etg Gang Varmekabler, Switch to Off (0) by/from: CAPI Control Handler
apr-30 05:35:19 Device Control Device: 2. etg Stue Ovn TV, Switch to Off (0) by/from: CAPI Control Handler
apr-30 05:35:19 Device Control Device: 2. etg Stue Ovn Vindu, Switch to Off (0) by/from: CAPI Control Handler
apr-30 05:34:14 Z-Wave Device: Node 8 Z-Wave Volts Set to 231,78 (231,78 Volts)
apr-30 05:30:26 Z-Wave Device: Node 6 Z-Wave Volts Set to 234,35 (234,35 Volts)
apr-30 05:30:19 Device Control Device: 1. etg Gang Varmekabler, Switch to Off (0) by/from: CAPI Control Handler
apr-29 22:38:53 Device Control Device: 2. etg Stue Set point VINDU to 18 °C (18)
apr-29 22:38:53 Device Control Device: 2. etg Stue Set point TV to 18 °C (18)
apr-29 22:38:53 Event Event Trigger "Varmekontroll Varme-bryter senk"
apr-29 22:38:53 Device Control Device: Hus Hus Varme, Virtual to Off (0) by/from: CAPI Control Handler
apr-29 22:38:43 Z-Wave Device: Node 6 Z-Wave Volts Set to 234,77 (234,77 Volts)
apr-29 22:38:37 Z-Wave Device: 1. etg Gang Varmekabler, Switch Set to 0
apr-29 22:38:36 Z-Wave Device: 2. etg Stue Ovn Vindu, Switch Set to 0
apr-29 22:38:36 Z-Wave Device: 2. etg Stue Ovn TV, Switch Set to 0
apr-29 22:38:35 Device Control Device: 1. etg Gang Varmekabler, Switch to Off (0) by/from: CAPI Control Handler
apr-29 22:38:35 Device Control Device: 2. etg Stue Ovn Vindu, Switch to Off (0) by/from: CAPI Control Handler
apr-29 22:38:35 Device Control Device: 2. etg Stue Ovn TV, Switch to Off (0) by/from: CAPI Control Handler
apr-29 22:38:35 Device Control Device: 1. etg Gang Set point VARMEKABLER to 23 °C (23)
apr-29 22:38:35 Device Control Device: 2. etg Stue Set point VINDU to 23 °C (23)
apr-29 22:38:35 Device Control Device: 2. etg Stue Set point TV to 23 °C (23)
apr-29 22:38:35 Event Event Trigger "Varmekontroll Varme-bryter hev"
apr-29 22:38:35 Device Control Device: Hus Hus Varme, Virtual to On (100) by/from: CAPI Control Handler
apr-29 22:38:28 Z-Wave Device: Node 6 Z-Wave Amperes Set to 0 (0 Amperes)
apr-29 22:38:27 Z-Wave Device: Node 6 Z-Wave Volts Set to 233,94 (233,94 Volts)
apr-29 22:38:26 Z-Wave Device: Node 6 Z-Wave Watts Set to 0 (0 Watts)
apr-29 22:38:20 Z-Wave Device: Node 6 Z-Wave Amperes Set to 0,06 (0,06 Amperes)
apr-29 22:38:19 Z-Wave Device: Node 6 Z-Wave Volts Set to 233,61 (233,61 Volts)
apr-29 22:38:18 Z-Wave Device: Node 6 Z-Wave Watts Set to 1 (1 Watts)
apr-29 22:38:03 Z-Wave Device: Node 6 Z-Wave Volts Set to 234,03 (234,03 Volts)
apr-29 22:37:57 Z-Wave Device: 2. etg Stue Ovn Vindu, Switch Set to 255
apr-29 22:37:57 Device Control Device: 2. etg Stue Ovn Vindu, Switch to On (255) by/from: CAPI Control Handler
apr-29 22:37:57 Device Control Device: 2. etg Stue Set point VINDU to 5 °C (36,5) by/from: CAPI Control Handler
apr-29 22:37:55 Z-Wave Device: 2. etg Stue Ovn TV, Switch Set to 255
apr-29 22:37:55 Device Control Device: 2. etg Stue Ovn TV, Switch to On (255) by/from: CAPI Control Handler
apr-29 22:37:55 Device Control Device: 2. etg Stue Set point TV to 5 °C (35) by/from: CAPI Control Handler
apr-29 22:36:55 Z-Wave Device: 1. etg Gang Varmekabler, Switch Set to 255
apr-29 22:36:55 Device Control Device: 1. etg Gang Varmekabler, Switch to On (255) by/from: CAPI Control Handler
apr-29 22:36:55 Device Control Device: 1. etg Gang Set point VARMEKABLER to 5 °C (24,5) by/from: CAPI Control Handler
apr-29 22:36:51 Device Control Device: 1. etg Gang Varmekabler, Switch to Off (0) by/from: CAPI Control Handler
apr-29 22:36:51 Device Control Device: 1. etg Gang Set point VARMEKABLER to 5 °C (24) by/from: CAPI Control Handler
apr-29 22:36:41 Z-Wave Device: 1. etg Gang Varmekabler, Switch Set to 0
apr-29 22:36:41 Device Control Device: 1. etg Gang Varmekabler, Switch to Off (0) by/from: CAPI Control Handler
apr-29 22:36:41 Device Control Device: 1. etg Gang Set point VARMEKABLER to 5 °C (19) by/from: CAPI Control Handler
apr-29 22:36:29 Event Running script statement immediately: &hs.setDeviceValueByRef(145,hs.DeviceValueEx(9),True)
apr-29 22:36:29 Event Event Trigger "Varmekontroll Gang_temp_RFXCOM"
apr-29 22:36:29 Event Event Varmekontroll Gang_temp_RFXCOM triggered by the event page 'Run' button.
apr-29 22:35:32 Z-Wave Device: Node 8 Z-Wave Volts Set to 231,65 (231,65 Volts)
apr-29 22:35:23 Z-Wave Device: Node 6 Z-Wave Volts Set to 232,04 (232,04 Volts)
apr-29 22:35:16 Z-Wave Device: 1. etg Gang Varmekabler, Switch Set to 255
apr-29 22:35:16 Device Control Device: 1. etg Gang Varmekabler, Switch to On (255) by/from: CAPI Control Handler
apr-29 22:35:16 Device Control Device: 2. etg Stue Ovn TV, Switch to Off (0) by/from: CAPI Control Handler
apr-29 22:35:16 Device Control Device: 2. etg Stue Ovn Vindu, Switch to Off (0) by/from: CAPI Control Handler
apr-29 22:35:16 Device Control Device: 1. etg Gang Varmekabler, Switch to On (255) by/from: CAPI Control Handler
apr-29 22:35:16 Device Control Device: 1. etg Gang Set point VARMEKABLER to 5 °C (20) by/from: CAPI Control Handler
apr-29 22:34:20 Buienradar Incorrect amount of data received from Buienradar: (since 29.04.2018 22:17:16)
apr-29 22:33:31 RFXCOM Error: 36 (AddVirtualDeviceParam) no VirDV1 present!
apr-29 22:31:46 RFXCOM Error: 36 (AddVirtualDeviceParam) no VirDV1 present!
apr-29 22:31:06 Z-Wave Device: Node 6 Z-Wave Volts Set to 234,14 (234,14 Volts)
apr-29 22:30:59 Device Control Device: 2. etg Stue Ovn Vindu, Switch to Off (0) by/from: CAPI Control Handler
apr-29 22:30:59 Device Control Device: 2. etg Stue Ovn TV, Switch to Off (0) by/from: CAPI Control Handler
apr-29 22:30:59 Device Control Device: 2. etg Stue Set point VINDU to 18 °C (18)
apr-29 22:30:59 Device Control Device: 2. etg Stue Set point TV to 18 °C (18)
apr-29 22:30:59 Event Event Trigger "Varmekontroll Varme-bryter senk"
apr-29 22:30:59 Device Control Device: Hus Hus Varme, Virtual to Off (0) by/from: CAPI Control Handler
apr-29 22:30:34 Error Exception in post processing (Events-0) of the Events page: Elementet er allerede lagt til. Nøkkel i katalog: varme-bryter senk. Nøkkelen som legges til: varme-bryter senk
apr-29 22:30:32 Z-Wave Device: Node 8 Z-Wave Volts Set to 233,82 (233,82 Volts)
apr-29 22:30:22 Z-Wave Device: Node 6 Z-Wave Volts Set to 234,6 (234,6 Volts)
apr-29 22:30:16 Device Control Device: 2. etg Stue Ovn TV, Switch to Off (0) by/from: CAPI Control Handler
apr-29 22:30:16 Device Control Device: 2. etg Stue Ovn Vindu, Switch to Off (0) by/from: CAPI Control Handler
apr-29 22:30:05 Z-Wave Device: Node 6 Z-Wave Volts Set to 234,68 (234,68 Volts)
apr-29 22:29:58 Device Control Device: 2. etg Stue Ovn Vindu, Switch to Off (0) by/from: CAPI Control Handler
apr-29 22:29:58 Device Control Device: 2. etg Stue Ovn TV, Switch to Off (0) by/from: CAPI Control Handler
apr-29 22:29:58 Device Control Device: 2. etg Stue Set point VINDU to 23 °C (23)
apr-29 22:29:58 Device Control Device: 2. etg Stue Set point TV to 23 °C (23)
apr-29 22:29:58 Event Event Trigger "Varmekontroll Varme-bryter senk"
apr-29 22:29:58 Device Control Device: Hus Hus Varme, Virtual to On (100) by/from: CAPI Control Handler
apr-29 22:29:29 Device Control Device: 2. etg Stue Ovn TV, Switch to Off (0) by/from: CAPI Control Handler
apr-29 22:29:29 Device Control Device: 2. etg Stue Set point TV to 5 °C (18,5) by/from: CAPI Control Handler
apr-29 22:29:27 Z-Wave Device: Node 6 Z-Wave Volts Set to 234,86 (234,86 Volts)
apr-29 22:29:21 Device Control Device: 2. etg Stue Ovn Vindu, Switch to Off (0) by/from: CAPI Control Handler
apr-29 22:29:21 Device Control Device: 2. etg Stue Set point VINDU to 5 °C (21,5) by/from: CAPI Control Handler
apr-29 22:27:22 Z-Wave Device: Node 2 Z-Wave Luminance Set to 1 (Lux)
apr-29 22:26:12 Z-Wave Device: Node 6 Z-Wave Volts Set to 233,08 (233,08 Volts)
apr-29 22:26:06 Device Control Device: 2. etg Stue Ovn Vindu, Switch to Off (0) by/from: CAPI Control Handler
apr-29 22:26:06 Device Control Device: 2. etg Stue Set point to 5 °C (23) by/from: CAPI Control Handler
apr-29 22:26:03 Device Control Device: 2. etg Stue Ovn TV, Switch to Off (0) by/from: CAPI Control Handler
apr-29 22:26:03 Device Control Device: 2. etg Stue Set point to 5 °C (23) by/from: CAPI Control Handler
apr-29 22:25:54 Z-Wave Device: 2. etg Stue Ovn TV, Switch Set to 0
apr-29 22:25:53 Device Control Device: 2. etg Stue Ovn TV, Switch to Off (0) by/from: CAPI Control Handler
apr-29 22:25:53 Device Control Device: 2. etg Stue Set point to 5 °C (21,5) by/from: CAPI Control Handler
apr-29 22:25:39 Z-Wave Device: 2. etg Stue Ovn TV, Switch Set to 255
apr-29 22:25:39 Device Control Device: 2. etg Stue Ovn TV, Switch to On (255) by/from: CAPI Control Handler
apr-29 22:25:39 Device Control Device: 2. etg Stue Set point to 5 °C (32,5) by/from: CAPI Control Handler
apr-29 22:25:32 Z-Wave Device: Node 8 Z-Wave Volts Set to 232,83 (232,83 Volts)
apr-29 22:25:22 Z-Wave Device: Node 6 Z-Wave Volts Set to 233,1 (233,1 Volts)
apr-29 22:25:19 Device Control Device: 2. etg Stue Ovn TV, Switch to Off (0) by/from: CAPI Control Handler
apr-29 22:25:19 Device Control Device: 2. etg Stue Set point to 5 °C (7,5) by/from: CAPI Control Handler
apr-29 22:25:16 Device Control Device: 2. etg Stue Ovn TV, Switch to Off (0) by/from: CAPI Control Handler
apr-29 22:25:16 Device Control Device: 2. etg Stue Ovn Vindu, Switch to Off (0) by/from: CAPI Control Handler
apr-29 22:25:14 Event Running script statement immediately: &hs.setDeviceValueByRef(141,hs.DeviceValueEx(17),True)
apr-29 22:25:14 Event Running script statement immediately: &hs.setDeviceValueByRef(124,hs.DeviceValueEx(17),True)
apr-29 22:25:14 Event Event Trigger "Varmekontroll Stue_temp_RFXCOM"
apr-29 22:25:14 Event Event Varmekontroll Stue_temp_RFXCOM triggered by the event page 'Run' button.
apr-29 22:24:59 Event Running script statement immediately: &hs.setDeviceValueByRef(141,hs.DeviceValueEx(17),True)
apr-29 22:24:59 Event Running script statement immediately: &hs.setDeviceValueByRef(124,hs.DeviceValueEx(17),True)
apr-29 22:24:59 Event Event Trigger "Varmekontroll Stue_temp_RFXCOM"
apr-29 22:24:59 Event Event Varmekontroll Stue_temp_RFXCOM triggered by the event page 'Run' button.
apr-29 22:22:53 RFXCOM Error: 36 (AddVirtualDeviceParam) no VirDV1 present!
apr-29 22:20:31 Z-Wave Device: Node 8 Z-Wave Volts Set to 233,03 (233,03 Volts)
apr-29 22:20:22 Z-Wave Device: Node 6 Z-Wave Volts Set to 233,13 (233,13 Volts)
apr-29 22:20:16 Device Control Device: 2. etg Stue Ovn Vindu, Switch to Off (0) by/from: CAPI Control Handler
apr-29 22:19:16 Buienradar Too many consecutive errors detected, error logging interval reduced to every 15 minutes...
apr-29 22:19:16 Buienradar Incorrect amount of data received from Buienradar:
apr-29 22:18:46 Buienradar Incorrect amount of data received from Buienradar:
apr-29 22:18:16 Buienradar Incorrect amount of data received from Buienradar:
apr-29 22:18:14 Z-Wave Device: Node 6 Z-Wave Volts Set to 232,26 (232,26 Volts)
apr-29 22:18:08 Z-Wave Device: 2. etg Stue Ovn Vindu, Switch Set to 0
apr-29 22:18:08 Device Control Device: 2. etg Stue Ovn Vindu, Switch to Off (0) by/from: CAPI Control Handler
apr-29 22:18:08 Device Control Device: 2. etg Stue Set point to 5 °C (23,5) by/from: CAPI Control Handler
apr-29 22:18:00 Z-Wave Device: Node 6 Z-Wave Volts Set to 233,7 (233,7 Volts)
apr-29 22:17:55 Z-Wave Device: 2. etg Stue Ovn Vindu, Switch Set to 255
apr-29 22:17:54 Device Control Device: 2. etg Stue Ovn Vindu, Switch to On (255) by/from: CAPI Control Handler
apr-29 22:17:54 Device Control Device: 2. etg Stue Set point to 5 °C (27) by/from: CAPI Control Handler
apr-29 22:17:47 TTS Speak ():Welcome to Home-Seer
apr-29 22:17:47 Z-Wave Starting Z-Wave Polling for Network C9FECFB9...
apr-29 22:17:46 Buienradar Incorrect amount of data received from Buienradar:
apr-29 22:17:21 Z-Wave *******************************************************************************
apr-29 22:17:21 Z-Wave STARTUP COMPLETE: All configured interfaces were successfully initialized.
apr-29 22:17:21 Z-Wave *******************************************************************************
apr-29 22:17:20 Z-Wave Aeotec Z-wave stick: ......................................................................
apr-29 22:17:20 Z-Wave Aeotec Z-wave stick: .............................. FINISHED ..............................
apr-29 22:17:20 Z-Wave Aeotec Z-wave stick: ......................................................................
apr-29 22:17:20 Z-Wave Aeotec Z-wave stick is the SIS for the network.
apr-29 22:17:20 Z-Wave Aeotec Z-wave stick There is a SUC/SIS in the network.
apr-29 22:17:20 Z-Wave Aeotec Z-wave stick Controller is static lib.
apr-29 22:17:20 Z-Wave Aeotec Z-wave stick Controller chip type is ZW050x.
apr-29 22:17:19 Z-Wave The interface's security support has been set.
apr-29 22:17:19 Z-Wave Aeotec Z-wave stick: Found 9 Z-Wave nodes in interface node ID 1 (Aeotec Z-wave stick)
apr-29 22:17:19 Z-Wave Aeotec Z-wave stick: Z-Wave interface node ID: 1, Home ID: C9FECFB9
apr-29 22:17:19 Z-Wave Aeotec Z-wave stick: Z-Wave Serial API version: 5
apr-29 22:17:19 Z-Wave Aeotec Z-wave stick: Z-Wave services for the SECURITY COMMAND CLASS were successfully started.
apr-29 22:17:19 Z-Wave Aeotec Z-wave stick: Controller firmware version: 1.0
apr-29 22:17:19 Z-Wave Aeotec Z-wave stick: Controller Manufacturer: Aeon Labs, ID=0x5A, Type=0x1
apr-29 22:17:17 Z-Wave Aeotec Z-wave stick: Getting node information from controller...
apr-29 22:17:17 Z-Wave Aeotec Z-wave stick: The Z-Wave API Execution Thread was Started or Restarted.
apr-29 22:17:17 Z-Wave Aeotec Z-wave stick: The Z-Wave Command Execution Thread was Started or Restarted.
apr-29 22:17:17 Z-Wave 465 Simple AV Control Command Class Control Commands have been loaded successfully.
apr-29 22:17:17 Z-Wave Aeotec Z-wave stick: ----------------------------------------------------------------------
apr-29 22:17:17 Z-Wave Initializing Z-Wave interface Aeotec Z-wave stick (Aeon Labs Aeotec Z-Stick) on COM5
apr-29 22:17:17 Z-Wave Aeotec Z-wave stick: ----------------------------------------------------------------------
apr-29 22:17:17 Z-Wave Aeotec Z-wave stick: ======================================================================
apr-29 22:17:17 Z-Wave 0 event triggers were loaded from HomeSeer.
apr-29 22:17:17 Z-Wave 0 event actions were loaded from HomeSeer.
apr-29 22:17:17 Starting Plug-In Plugin Z-Wave started successfully in 505 milliseconds
apr-29 22:17:17 Info System connected to MyHS Service successfully with license ID 112304.
apr-29 22:17:16 Z-Wave 47 total Z-Wave Data Objects loaded.
apr-29 22:17:16 Z-Wave Network C9FECFB9 has 47 device data elements.
apr-29 22:17:16 Z-Wave 1 Networks were restored from the data in the database... Building data connections.
apr-29 22:17:16 Z-Wave Loading Z-Wave Data Objects...
apr-29 22:17:16 Z-Wave 1 total Z-Wave Network Objects loaded.
apr-29 22:17:16 Z-Wave Loading Z-Wave Network Objects...
apr-29 22:17:16 Info System connected to MyHS Service, waiting for acknowledge...
apr-29 22:17:16 Z-Wave Database: Opening (Mode=Read Only) up HomeSeer database C:\Program Files (x86)\HomeSeer HS3\Data\Z-Wave\Z-Wave2.db
apr-29 22:17:16 Startup Start up complete.
apr-29 22:17:16 Startup HSSentry is disabled in Setup, sentry will not be started.
apr-29 22:17:16 Startup (Startup.vb script) No speaker clients detected, waiting up to 30 seconds for any to connect...
apr-29 22:17:16 Startup (Startup.vb script) Scripting is OK and is now running Startup.vb
apr-29 22:17:16 Z-Wave InitIO called, plug-in version 3.0.1.190 is being initialized...
apr-29 22:17:16 Startup Starting Event Scheduler...
apr-29 22:17:16 Starting Plug-In Initializing plugin Z-Wave ...
apr-29 22:17:16 Starting Plug-In Plugin EasyTrigger started successfully in 104 milliseconds
apr-29 22:17:16 EasyTrigger INFO Found 0 device group value triggers
apr-29 22:17:16 EasyTrigger INFO Refreshing list of device group value triggers to monitor
apr-29 22:17:16 EasyTrigger INFO Found 0 random triggers
apr-29 22:17:16 EasyTrigger INFO Refreshing list of random triggers to monitor
apr-29 22:17:16 EasyTrigger INFO Found 0 schedule triggers
apr-29 22:17:16 EasyTrigger INFO Refreshing list of schedule triggers to monitor
apr-29 22:17:16 EasyTrigger INFO Found 0 device's value conditions that need monitoring
apr-29 22:17:16 EasyTrigger INFO Found 0 device's value triggers
apr-29 22:17:16 EasyTrigger INFO Refreshing list of device's value triggers to monitor
apr-29 22:17:16 EasyTrigger INFO Found 0 device's string triggers
apr-29 22:17:16 EasyTrigger INFO Refreshing list of device's string triggers to monitor
apr-29 22:17:16 EasyTrigger INFO EasyTrigger version 3.0.0.46
apr-29 22:17:16 Starting Plug-In Initializing plugin EasyTrigger ...
apr-29 22:17:16 Starting Plug-In Plugin RFXCOM started successfully in 198 milliseconds
apr-29 22:17:16 RFXCOM 36 (InitIO) RFXCOM version is:30.0.0.36
apr-29 22:17:16 Startup Running the startup script Startup.vb
apr-29 22:17:16 Startup Starting Find service...
apr-29 22:17:16 Startup Updater services starting...
apr-29 22:17:16 Web Server Web Server authorized local login successful from: 192.168.1.6 User: Henrik
apr-29 22:17:16 Starting Plug-In Initializing plugin RFXCOM ...
apr-29 22:17:16 Starting Plug-In Plugin Buienradar started successfully in 447 milliseconds
apr-29 22:17:16 Buienradar Incorrect amount of data received from Buienradar:
apr-29 22:17:16 Database Opening (Mode=Read/Write) up HomeSeer Energy database C:\Program Files (x86)\HomeSeer HS3\Data\Energy\Energy.hsd
apr-29 22:17:16 Speech Listening for remote speaker connections on port 10401
apr-29 22:17:16 Startup Initializing Speaker Client Interface
apr-29 22:17:16 Startup Start automation engine...
apr-29 22:17:15 Buienradar Initializing plugin Buienradar version 3.0.0.21
apr-29 22:17:15 Starting Plug-In Initializing plugin Buienradar ...
apr-29 22:17:15 Startup Creating ASP.NET application host...
apr-29 22:17:15 Info Plugin Z-Wave has connected. IP:127.0.0.1:49429
apr-29 22:17:15 Web Server Web Server started on port 80
apr-29 22:17:15 Web Server Local IP address (subnet) is: 192.168.1.152 (255.255.255.0)
apr-29 22:17:15 Info Plugin RFXCOM has connected. IP:127.0.0.1:49427
apr-29 22:17:15 Info Plugin Buienradar has connected. IP:127.0.0.1:49423
apr-29 22:17:15 Info Plugin EasyTrigger has connected. IP:127.0.0.1:49424
apr-29 22:17:15 Startup HStouch server started, waiting for clients to connect.
apr-29 22:17:15 HSTouch Server Server started on port 10200
apr-29 22:17:15 Plug-In Finished initializing plug-in Z-Wave
apr-29 22:17:15 Plug-In Finished initializing plug-in EasyTrigger
apr-29 22:17:15 Plug-In Interface EasyTrigger is running as a trial, 30 days remaining.
apr-29 22:17:15 Plug-In Finished initializing plug-in RFXCOM
apr-29 22:17:15 Plug-In Interface RFXCOM is running as a trial, 30 days remaining.
apr-29 22:17:15 Plug-In Finished initializing plug-in Buienradar
apr-29 22:17:15 Startup Initializing Plug-Ins
apr-29 22:17:15 Plug-In Found plug-in: Z-Wave, version: 3.0.1.190
apr-29 22:17:15 Plug-In Found plug-in: RFXCOM, version: 30.0.0.36
apr-29 22:17:15 Plug-In Found plug-in: HAI OmniStat, version: 3.0.1.4
apr-29 22:17:15 Plug-In Found plug-in: EasyTrigger, version: 3.0.0.46
apr-29 22:17:15 Plug-In Found plug-in: Buienradar, version: 3.0.0.21
apr-29 22:17:15 Startup Checking for available plug-ins
apr-29 22:17:15 Info Remote plug-in API interface started on port 10400
apr-29 22:17:15 Startup This version of HomeSeer is registered as a HS3PRO version.
apr-29 22:17:15 Startup Creating Speaker Client Interface Object...
apr-29 22:17:15 Startup HomeSeer version is: 3.0.0.435
apr-29 22:17:15 Load Config Loading TIMERS...
apr-29 22:17:15 Load Config Loading COUNTERS...
apr-29 22:17:15 Load Config 5 total events loaded.
apr-29 22:17:15 Load Config Loading Events...
apr-29 22:17:15 Load Config Loading Event Groups...
apr-29 22:17:15 Load Config 60 total devices loaded.
apr-29 22:17:15 Database Loading Devices...
apr-29 22:17:15 Database Opening (Mode=Read Only) up HomeSeer database C:\Program Files (x86)\HomeSeer HS3\Data\HomeSeerData.hsd
apr-29 22:17:15 Startup Loading configuration file ...
apr-29 22:17:15 Startup Database SAVE process started.
apr-29 22:17:15 Startup Local voice recognition class started.
apr-29 22:17:15 Startup HSPhone external interface class started.
apr-29 22:17:15 Startup Plug-In Interface class started.
apr-29 22:17:15 Startup E-Mail RECEIVE class started.
apr-29 22:17:15 Startup E-Mail SEND class started.
apr-29 22:17:15 Startup Web server class started.
apr-29 22:17:15 Startup Application interface class started.
apr-29 22:17:15 Startup COM port classes started.
apr-29 22:17:15 Startup Creating Class Objects...
apr-29 22:17:15 Startup
apr-29 22:17:15 Startup ********************************************************************************
apr-29 22:17:15 Startup HomeSeer version 3.0.0.435 Edition: HS3 Pro Starting Now
apr-29 22:17:15 Startup ********************************************************************************
apr-29 22:17:15 Startup
apr-29 22:17:15 Startup Settings Loaded.
apr-29 22:38:53 Device Control Device: 1. etg Gang Set point VARMEKABLER to 18 °C (18)
apr-29 22:38:53 Device Control Device: 2. etg Stue Set point VINDU to 18 °C (18)
apr-29 22:38:53 Device Control Device: 2. etg Stue Set point TV to 18 °C (18)
apr-29 22:38:53 Event Event Trigger "Varmekontroll Varme-bryter senk"
apr-29 22:38:53 Device Control Device: Hus Hus Varme, Virtual to Off (0) by/from: CAPI Control Handler
apr-29 22:38:43 Z-Wave Device: Node 6 Z-Wave Volts Set to 234,77 (234,77 Volts)
apr-29 22:38:37 Z-Wave Device: 1. etg Gang Varmekabler, Switch Set to 0
apr-29 22:38:36 Z-Wave Device: 2. etg Stue Ovn Vindu, Switch Set to 0
apr-29 22:38:36 Z-Wave Device: 2. etg Stue Ovn TV, Switch Set to 0
apr-29 22:38:35 Device Control Device: 1. etg Gang Varmekabler, Switch to Off (0) by/from: CAPI Control Handler
apr-29 22:38:35 Device Control Device: 2. etg Stue Ovn Vindu, Switch to Off (0) by/from: CAPI Control Handler
apr-29 22:38:35 Device Control Device: 2. etg Stue Ovn TV, Switch to Off (0) by/from: CAPI Control Handler
apr-29 22:38:35 Device Control Device: 1. etg Gang Set point VARMEKABLER to 23 °C (23)
apr-29 22:38:35 Device Control Device: 2. etg Stue Set point VINDU to 23 °C (23)
apr-29 22:38:35 Device Control Device: 2. etg Stue Set point TV to 23 °C (23)
apr-29 22:38:35 Event Event Trigger "Varmekontroll Varme-bryter hev"
apr-29 22:38:35 Device Control Device: Hus Hus Varme, Virtual to On (100) by/from: CAPI Control Handler
apr-29 22:38:28 Z-Wave Device: Node 6 Z-Wave Amperes Set to 0 (0 Amperes)
apr-29 22:38:27 Z-Wave Device: Node 6 Z-Wave Volts Set to 233,94 (233,94 Volts)
apr-29 22:38:26 Z-Wave Device: Node 6 Z-Wave Watts Set to 0 (0 Watts)
apr-29 22:38:20 Z-Wave Device: Node 6 Z-Wave Amperes Set to 0,06 (0,06 Amperes)
apr-29 22:38:19 Z-Wave Device: Node 6 Z-Wave Volts Set to 233,61 (233,61 Volts)
apr-29 22:38:18 Z-Wave Device: Node 6 Z-Wave Watts Set to 1 (1 Watts)
apr-29 22:38:03 Z-Wave Device: Node 6 Z-Wave Volts Set to 234,03 (234,03 Volts)
apr-29 22:37:57 Z-Wave Device: 2. etg Stue Ovn Vindu, Switch Set to 255
apr-29 22:37:57 Device Control Device: 2. etg Stue Ovn Vindu, Switch to On (255) by/from: CAPI Control Handler
apr-29 22:37:57 Device Control Device: 2. etg Stue Set point VINDU to 5 °C (36,5) by/from: CAPI Control Handler
apr-29 22:37:55 Z-Wave Device: 2. etg Stue Ovn TV, Switch Set to 255
apr-29 22:37:55 Device Control Device: 2. etg Stue Ovn TV, Switch to On (255) by/from: CAPI Control Handler
apr-29 22:37:55 Device Control Device: 2. etg Stue Set point TV to 5 °C (35) by/from: CAPI Control Handler
apr-29 22:36:55 Z-Wave Device: 1. etg Gang Varmekabler, Switch Set to 255
apr-29 22:36:55 Device Control Device: 1. etg Gang Varmekabler, Switch to On (255) by/from: CAPI Control Handler
apr-29 22:36:55 Device Control Device: 1. etg Gang Set point VARMEKABLER to 5 °C (24,5) by/from: CAPI Control Handler
apr-29 22:36:51 Device Control Device: 1. etg Gang Varmekabler, Switch to Off (0) by/from: CAPI Control Handler
apr-29 22:36:51 Device Control Device: 1. etg Gang Set point VARMEKABLER to 5 °C (24) by/from: CAPI Control Handler
apr-29 22:36:41 Z-Wave Device: 1. etg Gang Varmekabler, Switch Set to 0
apr-29 22:36:41 Device Control Device: 1. etg Gang Varmekabler, Switch to Off (0) by/from: CAPI Control Handler
apr-29 22:36:41 Device Control Device: 1. etg Gang Set point VARMEKABLER to 5 °C (19) by/from: CAPI Control Handler
apr-29 22:36:29 Event Running script statement immediately: &hs.setDeviceValueByRef(145,hs.DeviceValueEx(9),True)
apr-29 22:36:29 Event Event Trigger "Varmekontroll Gang_temp_RFXCOM"
apr-29 22:36:29 Event Event Varmekontroll Gang_temp_RFXCOM triggered by the event page 'Run' button.
apr-29 22:35:32 Z-Wave Device: Node 8 Z-Wave Volts Set to 231,65 (231,65 Volts)
apr-29 22:35:23 Z-Wave Device: Node 6 Z-Wave Volts Set to 232,04 (232,04 Volts)
apr-29 22:35:16 Z-Wave Device: 1. etg Gang Varmekabler, Switch Set to 255
apr-29 22:35:16 Device Control Device: 1. etg Gang Varmekabler, Switch to On (255) by/from: CAPI Control Handler
apr-29 22:35:16 Device Control Device: 2. etg Stue Ovn TV, Switch to Off (0) by/from: CAPI Control Handler
apr-29 22:35:16 Device Control Device: 2. etg Stue Ovn Vindu, Switch to Off (0) by/from: CAPI Control Handler
apr-29 22:35:16 Device Control Device: 1. etg Gang Varmekabler, Switch to On (255) by/from: CAPI Control Handler
apr-29 22:35:16 Device Control Device: 1. etg Gang Set point VARMEKABLER to 5 °C (20) by/from: CAPI Control Handler
apr-29 22:34:20 Buienradar Incorrect amount of data received from Buienradar: (since 29.04.2018 22:17:16)
apr-29 22:33:31 RFXCOM Error: 36 (AddVirtualDeviceParam) no VirDV1 present!
apr-29 22:31:46 RFXCOM Error: 36 (AddVirtualDeviceParam) no VirDV1 present!
apr-29 22:31:06 Z-Wave Device: Node 6 Z-Wave Volts Set to 234,14 (234,14 Volts)
apr-29 22:30:59 Device Control Device: 2. etg Stue Ovn Vindu, Switch to Off (0) by/from: CAPI Control Handler
apr-29 22:30:59 Device Control Device: 2. etg Stue Ovn TV, Switch to Off (0) by/from: CAPI Control Handler
apr-29 22:30:59 Device Control Device: 2. etg Stue Set point VINDU to 18 °C (18)
apr-29 22:30:59 Device Control Device: 2. etg Stue Set point TV to 18 °C (18)
apr-29 22:30:59 Event Event Trigger "Varmekontroll Varme-bryter senk"
apr-29 22:30:59 Device Control Device: Hus Hus Varme, Virtual to Off (0) by/from: CAPI Control Handler
apr-29 22:30:34 Error Exception in post processing (Events-0) of the Events page: Elementet er allerede lagt til. Nøkkel i katalog: varme-bryter senk. Nøkkelen som legges til: varme-bryter senk
apr-29 22:30:32 Z-Wave Device: Node 8 Z-Wave Volts Set to 233,82 (233,82 Volts)
apr-29 22:30:22 Z-Wave Device: Node 6 Z-Wave Volts Set to 234,6 (234,6 Volts)
apr-29 22:30:16 Device Control Device: 2. etg Stue Ovn TV, Switch to Off (0) by/from: CAPI Control Handler
apr-29 22:30:16 Device Control Device: 2. etg Stue Ovn Vindu, Switch to Off (0) by/from: CAPI Control Handler
apr-29 22:30:05 Z-Wave Device: Node 6 Z-Wave Volts Set to 234,68 (234,68 Volts)
apr-29 22:29:58 Device Control Device: 2. etg Stue Ovn Vindu, Switch to Off (0) by/from: CAPI Control Handler
apr-29 22:29:58 Device Control Device: 2. etg Stue Ovn TV, Switch to Off (0) by/from: CAPI Control Handler
apr-29 22:29:58 Device Control Device: 2. etg Stue Set point VINDU to 23 °C (23)
apr-29 22:29:58 Device Control Device: 2. etg Stue Set point TV to 23 °C (23)
apr-29 22:29:58 Event Event Trigger "Varmekontroll Varme-bryter senk"
apr-29 22:29:58 Device Control Device: Hus Hus Varme, Virtual to On (100) by/from: CAPI Control Handler
apr-29 22:29:29 Device Control Device: 2. etg Stue Ovn TV, Switch to Off (0) by/from: CAPI Control Handler
apr-29 22:29:29 Device Control Device: 2. etg Stue Set point TV to 5 °C (18,5) by/from: CAPI Control Handler
apr-29 22:29:27 Z-Wave Device: Node 6 Z-Wave Volts Set to 234,86 (234,86 Volts)
apr-29 22:29:21 Device Control Device: 2. etg Stue Ovn Vindu, Switch to Off (0) by/from: CAPI Control Handler
apr-29 22:29:21 Device Control Device: 2. etg Stue Set point VINDU to 5 °C (21,5) by/from: CAPI Control Handler
apr-29 22:27:22 Z-Wave Device: Node 2 Z-Wave Luminance Set to 1 (Lux)
apr-29 22:26:12 Z-Wave Device: Node 6 Z-Wave Volts Set to 233,08 (233,08 Volts)
apr-29 22:26:06 Device Control Device: 2. etg Stue Ovn Vindu, Switch to Off (0) by/from: CAPI Control Handler
apr-29 22:26:06 Device Control Device: 2. etg Stue Set point to 5 °C (23) by/from: CAPI Control Handler
apr-29 22:26:03 Device Control Device: 2. etg Stue Ovn TV, Switch to Off (0) by/from: CAPI Control Handler
apr-29 22:26:03 Device Control Device: 2. etg Stue Set point to 5 °C (23) by/from: CAPI Control Handler
apr-29 22:25:54 Z-Wave Device: 2. etg Stue Ovn TV, Switch Set to 0
apr-29 22:25:53 Device Control Device: 2. etg Stue Ovn TV, Switch to Off (0) by/from: CAPI Control Handler
apr-29 22:25:53 Device Control Device: 2. etg Stue Set point to 5 °C (21,5) by/from: CAPI Control Handler
apr-29 22:25:39 Z-Wave Device: 2. etg Stue Ovn TV, Switch Set to 255
apr-29 22:25:39 Device Control Device: 2. etg Stue Ovn TV, Switch to On (255) by/from: CAPI Control Handler
apr-29 22:25:39 Device Control Device: 2. etg Stue Set point to 5 °C (32,5) by/from: CAPI Control Handler
apr-29 22:25:32 Z-Wave Device: Node 8 Z-Wave Volts Set to 232,83 (232,83 Volts)
apr-29 22:25:22 Z-Wave Device: Node 6 Z-Wave Volts Set to 233,1 (233,1 Volts)
apr-29 22:25:19 Device Control Device: 2. etg Stue Ovn TV, Switch to Off (0) by/from: CAPI Control Handler
apr-29 22:25:19 Device Control Device: 2. etg Stue Set point to 5 °C (7,5) by/from: CAPI Control Handler
apr-29 22:25:16 Device Control Device: 2. etg Stue Ovn TV, Switch to Off (0) by/from: CAPI Control Handler
apr-29 22:25:16 Device Control Device: 2. etg Stue Ovn Vindu, Switch to Off (0) by/from: CAPI Control Handler
apr-29 22:25:14 Event Running script statement immediately: &hs.setDeviceValueByRef(141,hs.DeviceValueEx(17),True)
apr-29 22:25:14 Event Running script statement immediately: &hs.setDeviceValueByRef(124,hs.DeviceValueEx(17),True)
apr-29 22:25:14 Event Event Trigger "Varmekontroll Stue_temp_RFXCOM"
apr-29 22:25:14 Event Event Varmekontroll Stue_temp_RFXCOM triggered by the event page 'Run' button.
apr-29 22:24:59 Event Running script statement immediately: &hs.setDeviceValueByRef(141,hs.DeviceValueEx(17),True)
apr-29 22:24:59 Event Running script statement immediately: &hs.setDeviceValueByRef(124,hs.DeviceValueEx(17),True)
apr-29 22:24:59 Event Event Trigger "Varmekontroll Stue_temp_RFXCOM"
apr-29 22:24:59 Event Event Varmekontroll Stue_temp_RFXCOM triggered by the event page 'Run' button.
apr-29 22:22:53 RFXCOM Error: 36 (AddVirtualDeviceParam) no VirDV1 present!
apr-29 22:20:31 Z-Wave Device: Node 8 Z-Wave Volts Set to 233,03 (233,03 Volts)
apr-29 22:20:22 Z-Wave Device: Node 6 Z-Wave Volts Set to 233,13 (233,13 Volts)
apr-29 22:20:16 Device Control Device: 2. etg Stue Ovn Vindu, Switch to Off (0) by/from: CAPI Control Handler
apr-29 22:19:16 Buienradar Too many consecutive errors detected, error logging interval reduced to every 15 minutes...
apr-29 22:19:16 Buienradar Incorrect amount of data received from Buienradar:
apr-29 22:18:46 Buienradar Incorrect amount of data received from Buienradar:
apr-29 22:18:16 Buienradar Incorrect amount of data received from Buienradar:
apr-29 22:18:14 Z-Wave Device: Node 6 Z-Wave Volts Set to 232,26 (232,26 Volts)
apr-29 22:18:08 Z-Wave Device: 2. etg Stue Ovn Vindu, Switch Set to 0
apr-29 22:18:08 Device Control Device: 2. etg Stue Ovn Vindu, Switch to Off (0) by/from: CAPI Control Handler
apr-29 22:18:08 Device Control Device: 2. etg Stue Set point to 5 °C (23,5) by/from: CAPI Control Handler
apr-29 22:18:00 Z-Wave Device: Node 6 Z-Wave Volts Set to 233,7 (233,7 Volts)
apr-29 22:17:55 Z-Wave Device: 2. etg Stue Ovn Vindu, Switch Set to 255
apr-29 22:17:54 Device Control Device: 2. etg Stue Ovn Vindu, Switch to On (255) by/from: CAPI Control Handler
apr-29 22:17:54 Device Control Device: 2. etg Stue Set point to 5 °C (27) by/from: CAPI Control Handler
apr-29 22:17:47 TTS Speak ():Welcome to Home-Seer
apr-29 22:17:47 Z-Wave Starting Z-Wave Polling for Network C9FECFB9...
apr-29 22:17:46 Buienradar Incorrect amount of data received from Buienradar:
apr-29 22:17:21 Z-Wave *******************************************************************************
apr-29 22:17:21 Z-Wave STARTUP COMPLETE: All configured interfaces were successfully initialized.
apr-29 22:17:21 Z-Wave *******************************************************************************
apr-29 22:17:20 Z-Wave Aeotec Z-wave stick: ......................................................................
apr-29 22:17:20 Z-Wave Aeotec Z-wave stick: .............................. FINISHED ..............................
apr-29 22:17:20 Z-Wave Aeotec Z-wave stick: ......................................................................
apr-29 22:17:20 Z-Wave Aeotec Z-wave stick is the SIS for the network.
apr-29 22:17:20 Z-Wave Aeotec Z-wave stick There is a SUC/SIS in the network.
apr-29 22:17:20 Z-Wave Aeotec Z-wave stick Controller is static lib.
apr-29 22:17:20 Z-Wave Aeotec Z-wave stick Controller chip type is ZW050x.
apr-29 22:17:19 Z-Wave The interface's security support has been set.
apr-29 22:17:19 Z-Wave Aeotec Z-wave stick: Found 9 Z-Wave nodes in interface node ID 1 (Aeotec Z-wave stick)
apr-29 22:17:19 Z-Wave Aeotec Z-wave stick: Z-Wave interface node ID: 1, Home ID: C9FECFB9
apr-29 22:17:19 Z-Wave Aeotec Z-wave stick: Z-Wave Serial API version: 5
apr-29 22:17:19 Z-Wave Aeotec Z-wave stick: Z-Wave services for the SECURITY COMMAND CLASS were successfully started.
apr-29 22:17:19 Z-Wave Aeotec Z-wave stick: Controller firmware version: 1.0
apr-29 22:17:19 Z-Wave Aeotec Z-wave stick: Controller Manufacturer: Aeon Labs, ID=0x5A, Type=0x1
apr-29 22:17:17 Z-Wave Aeotec Z-wave stick: Getting node information from controller...
apr-29 22:17:17 Z-Wave Aeotec Z-wave stick: The Z-Wave API Execution Thread was Started or Restarted.
apr-29 22:17:17 Z-Wave Aeotec Z-wave stick: The Z-Wave Command Execution Thread was Started or Restarted.
apr-29 22:17:17 Z-Wave 465 Simple AV Control Command Class Control Commands have been loaded successfully.
apr-29 22:17:17 Z-Wave Aeotec Z-wave stick: ----------------------------------------------------------------------
apr-29 22:17:17 Z-Wave Initializing Z-Wave interface Aeotec Z-wave stick (Aeon Labs Aeotec Z-Stick) on COM5
apr-29 22:17:17 Z-Wave Aeotec Z-wave stick: ----------------------------------------------------------------------
apr-29 22:17:17 Z-Wave Aeotec Z-wave stick: ======================================================================
apr-29 22:17:17 Z-Wave 0 event triggers were loaded from HomeSeer.
apr-29 22:17:17 Z-Wave 0 event actions were loaded from HomeSeer.
apr-29 22:17:17 Starting Plug-In Plugin Z-Wave started successfully in 505 milliseconds
apr-29 22:17:17 Info System connected to MyHS Service successfully with license ID 112304.
apr-29 22:17:16 Z-Wave 47 total Z-Wave Data Objects loaded.
apr-29 22:17:16 Z-Wave Network C9FECFB9 has 47 device data elements.
apr-29 22:17:16 Z-Wave 1 Networks were restored from the data in the database... Building data connections.
apr-29 22:17:16 Z-Wave Loading Z-Wave Data Objects...
apr-29 22:17:16 Z-Wave 1 total Z-Wave Network Objects loaded.
apr-29 22:17:16 Z-Wave Loading Z-Wave Network Objects...
apr-29 22:17:16 Info System connected to MyHS Service, waiting for acknowledge...
apr-29 22:17:16 Z-Wave Database: Opening (Mode=Read Only) up HomeSeer database C:\Program Files (x86)\HomeSeer HS3\Data\Z-Wave\Z-Wave2.db
apr-29 22:17:16 Startup Start up complete.
apr-29 22:17:16 Startup HSSentry is disabled in Setup, sentry will not be started.
apr-29 22:17:16 Startup (Startup.vb script) No speaker clients detected, waiting up to 30 seconds for any to connect...
apr-29 22:17:16 Startup (Startup.vb script) Scripting is OK and is now running Startup.vb
apr-29 22:17:16 Z-Wave InitIO called, plug-in version 3.0.1.190 is being initialized...
apr-29 22:17:16 Startup Starting Event Scheduler...
apr-29 22:17:16 Starting Plug-In Initializing plugin Z-Wave ...
apr-29 22:17:16 Starting Plug-In Plugin EasyTrigger started successfully in 104 milliseconds
apr-29 22:17:16 EasyTrigger INFO Found 0 device group value triggers
apr-29 22:17:16 EasyTrigger INFO Refreshing list of device group value triggers to monitor
apr-29 22:17:16 EasyTrigger INFO Found 0 random triggers
apr-29 22:17:16 EasyTrigger INFO Refreshing list of random triggers to monitor
apr-29 22:17:16 EasyTrigger INFO Found 0 schedule triggers
apr-29 22:17:16 EasyTrigger INFO Refreshing list of schedule triggers to monitor
apr-29 22:17:16 EasyTrigger INFO Found 0 device's value conditions that need monitoring
apr-29 22:17:16 EasyTrigger INFO Found 0 device's value triggers
apr-29 22:17:16 EasyTrigger INFO Refreshing list of device's value triggers to monitor
apr-29 22:17:16 EasyTrigger INFO Found 0 device's string triggers
apr-29 22:17:16 EasyTrigger INFO Refreshing list of device's string triggers to monitor
apr-29 22:17:16 EasyTrigger INFO EasyTrigger version 3.0.0.46
apr-29 22:17:16 Starting Plug-In Initializing plugin EasyTrigger ...
apr-29 22:17:16 Starting Plug-In Plugin RFXCOM started successfully in 198 milliseconds
apr-29 22:17:16 RFXCOM 36 (InitIO) RFXCOM version is:30.0.0.36
apr-29 22:17:16 Startup Running the startup script Startup.vb
apr-29 22:17:16 Startup Starting Find service...
apr-29 22:17:16 Startup Updater services starting...
apr-29 22:17:16 Web Server Web Server authorized local login successful from: 192.168.1.6 User: Henrik
apr-29 22:17:16 Starting Plug-In Initializing plugin RFXCOM ...
apr-29 22:17:16 Starting Plug-In Plugin Buienradar started successfully in 447 milliseconds
apr-29 22:17:16 Buienradar Incorrect amount of data received from Buienradar:
apr-29 22:17:16 Database Opening (Mode=Read/Write) up HomeSeer Energy database C:\Program Files (x86)\HomeSeer HS3\Data\Energy\Energy.hsd
apr-29 22:17:16 Speech Listening for remote speaker connections on port 10401
apr-29 22:17:16 Startup Initializing Speaker Client Interface
apr-29 22:17:16 Startup Start automation engine...
apr-29 22:17:15 Buienradar Initializing plugin Buienradar version 3.0.0.21
apr-29 22:17:15 Starting Plug-In Initializing plugin Buienradar ...
apr-29 22:17:15 Startup Creating ASP.NET application host...
apr-29 22:17:15 Info Plugin Z-Wave has connected. IP:127.0.0.1:49429
apr-29 22:17:15 Web Server Web Server started on port 80
apr-29 22:17:15 Web Server Local IP address (subnet) is: 192.168.1.152 (255.255.255.0)
apr-29 22:17:15 Info Plugin RFXCOM has connected. IP:127.0.0.1:49427
apr-29 22:17:15 Info Plugin Buienradar has connected. IP:127.0.0.1:49423
apr-29 22:17:15 Info Plugin EasyTrigger has connected. IP:127.0.0.1:49424
apr-29 22:17:15 Startup HStouch server started, waiting for clients to connect.
apr-29 22:17:15 HSTouch Server Server started on port 10200
apr-29 22:17:15 Plug-In Finished initializing plug-in Z-Wave
apr-29 22:17:15 Plug-In Finished initializing plug-in EasyTrigger
apr-29 22:17:15 Plug-In Interface EasyTrigger is running as a trial, 30 days remaining.
apr-29 22:17:15 Plug-In Finished initializing plug-in RFXCOM
apr-29 22:17:15 Plug-In Interface RFXCOM is running as a trial, 30 days remaining.
apr-29 22:17:15 Plug-In Finished initializing plug-in Buienradar
apr-29 22:17:15 Startup Initializing Plug-Ins
apr-29 22:17:15 Plug-In Found plug-in: Z-Wave, version: 3.0.1.190
apr-29 22:17:15 Plug-In Found plug-in: RFXCOM, version: 30.0.0.36
apr-29 22:17:15 Plug-In Found plug-in: HAI OmniStat, version: 3.0.1.4
apr-29 22:17:15 Plug-In Found plug-in: EasyTrigger, version: 3.0.0.46
apr-29 22:17:15 Plug-In Found plug-in: Buienradar, version: 3.0.0.21
apr-29 22:17:15 Startup Checking for available plug-ins
apr-29 22:17:15 Info Remote plug-in API interface started on port 10400
apr-29 22:17:15 Startup This version of HomeSeer is registered as a HS3PRO version.
apr-29 22:17:15 Startup Creating Speaker Client Interface Object...
apr-29 22:17:15 Startup HomeSeer version is: 3.0.0.435
apr-29 22:17:15 Load Config Loading TIMERS...
apr-29 22:17:15 Load Config Loading COUNTERS...
apr-29 22:17:15 Load Config 5 total events loaded.
apr-29 22:17:15 Load Config Loading Events...
apr-29 22:17:15 Load Config Loading Event Groups...
apr-29 22:17:15 Load Config 60 total devices loaded.
apr-29 22:17:15 Database Loading Devices...
apr-29 22:17:15 Database Opening (Mode=Read Only) up HomeSeer database C:\Program Files (x86)\HomeSeer HS3\Data\HomeSeerData.hsd
apr-29 22:17:15 Startup Loading configuration file ...
apr-29 22:17:15 Startup Database SAVE process started.
apr-29 22:17:15 Startup Local voice recognition class started.
apr-29 22:17:15 Startup HSPhone external interface class started.
apr-29 22:17:15 Startup Plug-In Interface class started.
apr-29 22:17:15 Startup E-Mail RECEIVE class started.
apr-29 22:17:15 Startup E-Mail SEND class started.
apr-29 22:17:15 Startup Web server class started.
apr-29 22:17:15 Startup Application interface class started.
apr-29 22:17:15 Startup COM port classes started.
apr-29 22:17:15 Startup Creating Class Objects...
apr-29 22:17:15 Startup
apr-29 22:17:15 Startup ********************************************************************************
apr-29 22:17:15 Startup HomeSeer version 3.0.0.435 Edition: HS3 Pro Starting Now
apr-29 22:17:15 Startup ********************************************************************************
apr-29 22:17:15 Startup
apr-29 22:17:15 Startup Settings Loaded. -
16 timer siden, Moskus skrev:
Har du faktisk sjekket om devicene blir laget? Det kan være at de ikke er i Floor/Room utvalget du gjør...
Sier loggen noe?
Jeg ga opp denne litt.
Fikk til en Thermostat fix via RFXCOM som Iceball laget.
Takk for hjelp
mvh
-
-
Hey. Jeg fikk ikke til den siste linjen der."Then execute the commant: ..." can du ta screenshot av drop-down menu?Også, hvordan kan du velge "If Multisensor temp > setpunkt termostat" ?Jeg får bare opp "IF this device changes and becomes lesss/more then 'VALUE' "Vakke no likka væl
mvh
-
Hei!
Når jeg kjører scriptet første gangen via den blå knappen, skjer det ingen ting. Har sjekket over alle navn om evt skrivefeil mange ganger og oppsettet er helt identisk til ditt.
Til og med laget ny mappe "Default" som den skulle kjøre fra.
Noen som kanskje vet?
mvh
-
God ettermiddag
Jeg sliter med å legge til en virtuell termostat i HS3
slik at jeg kan styre varmen.
Noen gjort dette?
Googla litt også, prøvd ut litt av hvert men får ikke det helt til å fungere slik jeg vil.
SKulle også gjerne ha hatt
IF Gang-temp < Gang-termostat THEN SET VARMEKOBLER ON
Men jeg får bare mulighet til å sette "Gang-temp is less then a value in the range ____" og ikke opp mulighet til å velge en termostat.
mvh
-
22 minutter siden, Moskus skrev:
Bingo.
Du sier ingenting om hva slags lyskilde det er. LED, halogen?
Faktisk usikker. Kan bruke hvilken dimmer som helst som burde tilsi halogen, men de blir jo ikke varme. Bare litt lunka
-
redigerer tråden på nytt.
Jeg startet med Nexa Z-wave dimmer i gangen nede for litt over 1 år siden.
https://www.eldirekte.no/nexa-z-wave-mottaker-dimmer/cat-p/c1000619/p10635601
alt vel.
Elektriker installerte 3 til i går. 1stk i trappa og 2stk i stua.
Nå flimrer det det masse hvis jeg kjører alle på 100%. Selv den i gangen.
Er det dette man kaller for fasesnitt? Ser noen dimmere feks fra Qubino er merket med Faseavsnitt?
Eller kan det bare være feil volt som dimmeren gir ut?
Fant ut at jeg har Junistar LED 5W spotter, med philips Xitanium 10W/0.5A-20V DIM.
Ble orginalt styrt av en ELKO 315GLE som ser ut som en standard halogen dimmer.
Og det gir vel mening også siden det står en enkel 230v trafo foran led pærene og ikke en driver?
Det som er så rart, er at hvis Stuelyset står feks 20%, så flimrer det i Trappelyset hvis den står i 100%.
Noen vært borti slik flimring før og fikset det?
setter pris på svar
mvh og god helg
Henrik
-
fordnøyd med ID lock? =) jeg ser etter z-wave lås og det er så mye å velge imellom.
Ville kjøpe Yale YRD220, men usikker på om frekvensen passer her i Norge.
Aldri sett ID lock før.
edit: hva kostet den?
-
1 time siden, Gjelsvik skrev:
Kjører selv HS3 på en nuc. Fordelen med Pro er at du får med HS Touch (om du har tenkt å bruke det)
Installeren (på windows) er helt rett fram, type setup.exe og klikk "next" "next" next" "finnish"
ah ok.
Lyst på touch ja. Har 2 padder jeg bruker i dag med imperihome
-
23 minutter siden, Merko skrev:
Jeg hadde HomeSeer Pro en god stund, men så vidt jeg husker, så brukt jeg aldri noen av funksjonene\mulighetene som lå i "Pro"-pakken fremfor det vanlige.
Nå er jo HomeSeer veldig ofte på 50% tilbud, så du burde nok vente til da dersom du skal kjøpe.
Selv solgte jeg HomeSeer Pro lisensen til fordel for Home Assisstant (Som kjører på RPI3), som også er opensource\gratis.
Har ikke oppgradert alle lysbrytere enda, men har byttet ut alle pærene med Philips HUE og Ikea Trådfrid.
Ok. Kikket litt på HomeAssistant og OpenHab men jeg har lyst til å gå vekk fra alle de timene med feilsøking som har vært med Domoticz. Det funker jo nå, men skal jeg legge til titalls devicer til kan det bli problematisk.
-
Hey hey heeeey! (bitconnect pun)
her kommer masse spørsmål, trenger ikke svar på alt.
Har i dag domoticz på RPI3. Kjører enda en RPI3 med OpenVPN, Unifi controller og småtteri.
Kjeder meg skikkelig om dagen så har lyst til å ta helt av med hjemmeautomasjon.
Homeseer ser ut som det naturlige valget da prisen ift. resten av annlegget ikke blir så stort lenger.
Trenger jeg HS pro? 599$ vs 249$ er jo en stor forskjell.
MÅ jeg ha windows? I så fall hvordan installerer jeg det enkelt? Jeg har prøvd dette før og er bare helt noob på windows 10 IP adresser. Den lager bare 10.0.0... lokal adresse, mens jeg vil at den skal ha 192.168... osv.
Planen var liksom å kjøpe en intel NUC som er meget kraftig med masse minne og SSD. så smekke ubuntu på den.
Hvor mange enheter klarer en RPI3 komfortabelt med homeseer? Kanskje jeg overdriver med linux serveren min.
Alexa på HS? leser at dette skal gå fint, men leste at alle andre tingene mine skulle gå "fint" på domoticz også. Var MYE tid som gikk med for å installere det skikkelig.
Tips til noe som man burde ha?
planer om å oppgradere alle lysbrytere, termostater, persinner/gardiner, katten(neida. Eller?) osv
Smart locks? Noen som har en slik? Sett på August connect pro, og Schlage z-wave.
-
Min fibaro vegg plugg slutta også funke.
Leverte den tilbake til elektroimportøren og de sa den fungerte. Så klagde jeg og de sendte den til Fibaro. De fant feil og jeg fikk ny.
Det var noe rart siden de andre pluggene fortsatte å fungere.
Har bare hatt dette problemet med fibaro plugger og ingen andre plugger.
-
jeg vet ikke om du er på utkikk etter en klipper som du kan koble på hjemmeautomasjonen din.
men jeg kjøpte Gardena Li-130(husqvarna i gardena hus) og det er det beste kjøpet jeg har gjort noen gang.
Jeg kjøpte den på tilbud til 11 000,- og syntes det var i dyreste laget. Men litt spontan og "fuck it" mood så kjøpte jeg den. Angrer ikke et eneste sekund.
Ikke bare slipper jeg å klippe plenen.
Resultatet blir, og er ALLTID perfekt.
Klipperen går i HEFTIG regn og torden, ikke vært noe problem what-so-ever heller.
Trenger ikke koble til noe system for den bare funker.
Er ikke gardena selger
-
-
Bare vent, kommer til å skje oftere
Kjøp 2 ting
Skikkelig SD kort (jeg kjøpte Sandisk High endurance). Selve RPi3 ble veldig merkbart raskere, og mye mindre feil med korrupte filer.
I tillegg kjøpte jeg en APC UPS 700. Denne kan jeg kjøre hjemme-auto og internett på i opptil 15timer. Bruker jo bare noen få watt alt i alt.
Verdt en problemfri RPI3 løsning.
-
nei, Bruker "devicechanged" så det kjører nå en device forandrer status.
commandArray = {} if (devicechanged['Gang-MotionSensor'] == 'On' and otherdevices['Natt-bryter'] == 'On' and otherdevices['Hus-Lys-Hovedbryter'] == 'On' )then commandArray['Gang-dimmer']='Set Level 10' elseif (devicechanged['Gang-MotionSensor'] == 'Off' and otherdevices['Natt-bryter'] == 'On') then commandArray['Gang-dimmer']='Off' end return commandArray
Hvis du velger å gjøre som meg, husk å sett script til "Device". Ellers får du feilmelding
--2017-03-14 10:31:00.327 Error: EventSystem: in Lys-Gang-LUA: [string "commandArray = {} ..."]:2: attempt to index global 'devicechanged' (a nil value).
- 1
Nexa Dimmer z-wave AD-146
i Kjøp / Salg
Skrevet · Endret av jhenrikb
hey
Lærer noe nytt hver dag!
Jeg hadde visst Trailing edge LED, og disse er Leading Edge dimmere.
Selger 7 stk for 250kr stk.
De er helt nye. 3 stk er helt ubrukt, og resten bare brukt i noen timer for å teste/feilsøke.
Kanskje de funker for deg
edit: 4 stk gjenstår