mariusno

Da er Z-flash kjøpt inn og jeg planlegger hvordan jeg skal gjøre oppgraderingen. @Moskus vet du om man kan skru av HA-maskinen, ta primær-USB kontroller (UZB1) ut og inn i laptop. Kjøre z-flash oppgradering. Plugge tilbake og så starte HA igjen? Eller er man nødt til å ekskludere alt først? En annen spennende observasjon var at vi plutselig hørte at låsen "våknet", ingen på døra i følge kamera. Låsen sender så følgende data til kontroller og rapporterer nå 100% batteri: 2019-11-20 19:02:25.001 Detail, Node003, Received: 0x01, 0x0a, 0x00, 0x04, 0x00, 0x03, 0x02, 0x98, 0x40, 0xbb, 0x00, 0x93 2019-11-20 19:02:25.002 Info, Node003, Received SecurityCmd_NonceGet from node 3 2019-11-20 19:02:25.002 Info, NONCES: 0xbd, 0xf3, 0x0f, 0x14, 0x5d, 0x8d, 0xc5, 0xca 2019-11-20 19:02:25.002 Info, NONCES: 0x31, 0xb7, 0x8a, 0x23, 0x55, 0xcc, 0x28, 0x3f 2019-11-20 19:02:25.002 Info, NONCES: 0x58, 0xfe, 0x86, 0x1d, 0xce, 0x44, 0x6f, 0x28 2019-11-20 19:02:25.002 Info, NONCES: 0xe7, 0x87, 0x30, 0x8b, 0x5f, 0x61, 0x8c, 0xb6 2019-11-20 19:02:25.002 Info, NONCES: 0x68, 0x9c, 0x48, 0x62, 0xaa, 0x49, 0x97, 0x81 2019-11-20 19:02:25.002 Info, NONCES: 0xaa, 0xab, 0xc1, 0xd8, 0x35, 0xe7, 0x63, 0x62 2019-11-20 19:02:25.002 Info, NONCES: 0x2c, 0x00, 0x6e, 0x3d, 0xf9, 0xd1, 0x19, 0x53 2019-11-20 19:02:25.002 Info, NONCES: 0xb5, 0x8d, 0x85, 0x27, 0x7f, 0x76, 0x52, 0x78 2019-11-20 19:02:25.002 Info, Node003, Sending (Send) message (Callback ID=0x01, Expected Reply=0x00) - Nonce_Report - 0x01, 0x11, 0x00, 0x13, 0x03, 0x0a, 0x98, 0x80, 0xaa, 0xab, 0xc1, 0xd8, 0x35, 0xe7, 0x63, 0x62, 0x05, 0x01, 0x23: 2019-11-20 19:02:25.012 Detail, Received: 0x01, 0x04, 0x01, 0x13, 0x01, 0xe8 2019-11-20 19:02:25.012 Detail, ZW_SEND_DATA delivered to Z-Wave stack 2019-11-20 19:02:25.144 Detail, Received: 0x01, 0x05, 0x00, 0x13, 0x01, 0x00, 0xe8 2019-11-20 19:02:25.144 Detail, ZW_SEND_DATA Request with callback ID 0x01 received (expected 0x01) 2019-11-20 19:02:25.237 Detail, Node003, Received: 0x01, 0x23, 0x00, 0x04, 0x00, 0x03, 0x1b, 0x98, 0x81, 0x9f, 0xe6, 0xed, 0x20, 0x46, 0xec, 0xf3, 0xb7, 0xea, 0x04, 0x4e, 0xde, 0xd8, 0x6f, 0x12, 0x71, 0xaa, 0x40, 0x05, 0xcf, 0x56, 0x1c, 0x7a, 0xda, 0xa5, 0xbc, 0x00, 0xfa 2019-11-20 19:02:25.237 Info, Raw: 0x98, 0x81, 0x9f, 0xe6, 0xed, 0x20, 0x46, 0xec, 0xf3, 0xb7, 0xea, 0x04, 0x4e, 0xde, 0xd8, 0x6f, 0x12, 0x71, 0xaa, 0x40, 0x05, 0xcf, 0x56, 0x1c, 0x7a, 0xda, 0xa5, 0xbc 2019-11-20 19:02:25.237 Detail, Node003, Decrypted Packet: 0x00, 0x62, 0x03, 0xff, 0x00, 0x01, 0xfe, 0xfe 2019-11-20 19:02:25.237 Detail, 2019-11-20 19:02:25.237 Info, Node003, Received DoorLock report: DoorLock is Secured 2019-11-20 19:02:25.237 Detail, Node003, Refreshed Value: old value=true, new value=true, type=bool 2019-11-20 19:02:25.237 Detail, Node003, Changes to this value are not verified 2019-11-20 19:02:25.237 Detail, Node003, Notification: ValueChanged 2019-11-20 19:02:35.216 Detail, Node003, Received: 0x01, 0x0a, 0x00, 0x04, 0x00, 0x03, 0x02, 0x98, 0x40, 0xbc, 0x00, 0x94 2019-11-20 19:02:35.216 Info, Node003, Received SecurityCmd_NonceGet from node 3 2019-11-20 19:02:35.216 Info, NONCES: 0xbd, 0xf3, 0x0f, 0x14, 0x5d, 0x8d, 0xc5, 0xca 2019-11-20 19:02:35.217 Info, NONCES: 0x31, 0xb7, 0x8a, 0x23, 0x55, 0xcc, 0x28, 0x3f 2019-11-20 19:02:35.217 Info, NONCES: 0x58, 0xfe, 0x86, 0x1d, 0xce, 0x44, 0x6f, 0x28 2019-11-20 19:02:35.217 Info, NONCES: 0xe7, 0x87, 0x30, 0x8b, 0x5f, 0x61, 0x8c, 0xb6 2019-11-20 19:02:35.217 Info, NONCES: 0x68, 0x9c, 0x48, 0x62, 0xaa, 0x49, 0x97, 0x81 2019-11-20 19:02:35.217 Info, NONCES: 0xaa, 0xab, 0xc1, 0xd8, 0x35, 0xe7, 0x63, 0x62 2019-11-20 19:02:35.217 Info, NONCES: 0x6b, 0xa1, 0x4a, 0x21, 0x8b, 0xb9, 0xc3, 0xe3 2019-11-20 19:02:35.217 Info, NONCES: 0xb5, 0x8d, 0x85, 0x27, 0x7f, 0x76, 0x52, 0x78 2019-11-20 19:02:35.217 Info, Node003, Sending (Send) message (Callback ID=0x01, Expected Reply=0x00) - Nonce_Report - 0x01, 0x11, 0x00, 0x13, 0x03, 0x0a, 0x98, 0x80, 0x6b, 0xa1, 0x4a, 0x21, 0x8b, 0xb9, 0xc3, 0xe3, 0x05, 0x01, 0x5b: 2019-11-20 19:02:35.227 Detail, Received: 0x01, 0x04, 0x01, 0x13, 0x01, 0xe8 2019-11-20 19:02:35.227 Detail, ZW_SEND_DATA delivered to Z-Wave stack 2019-11-20 19:02:35.364 Detail, Received: 0x01, 0x05, 0x00, 0x13, 0x01, 0x00, 0xe8 2019-11-20 19:02:35.364 Detail, ZW_SEND_DATA Request with callback ID 0x01 received (expected 0x01) 2019-11-20 19:02:35.457 Detail, Node003, Received: 0x01, 0x23, 0x00, 0x04, 0x00, 0x03, 0x1b, 0x98, 0x81, 0x95, 0xfe, 0x47, 0xe7, 0x87, 0x51, 0xb1, 0x49, 0xb1, 0x7b, 0x76, 0xf3, 0x24, 0x65, 0x9c, 0x18, 0x6b, 0xdc, 0x5d, 0xc3, 0x60, 0x21, 0x73, 0xe5, 0xb5, 0xbc, 0x00, 0x41 2019-11-20 19:02:35.457 Info, Raw: 0x98, 0x81, 0x95, 0xfe, 0x47, 0xe7, 0x87, 0x51, 0xb1, 0x49, 0xb1, 0x7b, 0x76, 0xf3, 0x24, 0x65, 0x9c, 0x18, 0x6b, 0xdc, 0x5d, 0xc3, 0x60, 0x21, 0x73, 0xe5, 0xb5, 0xbc 2019-11-20 19:02:35.457 Detail, Node003, Decrypted Packet: 0x00, 0x62, 0x03, 0xff, 0x00, 0x01, 0xfe, 0xfe 2019-11-20 19:02:35.457 Detail, 2019-11-20 19:02:35.457 Info, Node003, Received DoorLock report: DoorLock is Secured 2019-11-20 19:02:35.457 Detail, Node003, Refreshed Value: old value=true, new value=true, type=bool 2019-11-20 19:02:35.457 Detail, Node003, Changes to this value are not verified 2019-11-20 19:02:35.457 Detail, Node003, Notification: ValueChanged 2019-11-20 19:02:46.356 Detail, Node003, Received: 0x01, 0x0a, 0x00, 0x04, 0x00, 0x03, 0x02, 0x98, 0x40, 0xbc, 0x00, 0x94 2019-11-20 19:02:46.356 Info, Node003, Received SecurityCmd_NonceGet from node 3 2019-11-20 19:02:46.356 Info, NONCES: 0xbd, 0xf3, 0x0f, 0x14, 0x5d, 0x8d, 0xc5, 0xca 2019-11-20 19:02:46.356 Info, NONCES: 0x31, 0xb7, 0x8a, 0x23, 0x55, 0xcc, 0x28, 0x3f 2019-11-20 19:02:46.356 Info, NONCES: 0x58, 0xfe, 0x86, 0x1d, 0xce, 0x44, 0x6f, 0x28 2019-11-20 19:02:46.356 Info, NONCES: 0xe7, 0x87, 0x30, 0x8b, 0x5f, 0x61, 0x8c, 0xb6 2019-11-20 19:02:46.356 Info, NONCES: 0x68, 0x9c, 0x48, 0x62, 0xaa, 0x49, 0x97, 0x81 2019-11-20 19:02:46.356 Info, NONCES: 0xaa, 0xab, 0xc1, 0xd8, 0x35, 0xe7, 0x63, 0x62 2019-11-20 19:02:46.356 Info, NONCES: 0x6b, 0xa1, 0x4a, 0x21, 0x8b, 0xb9, 0xc3, 0xe3 2019-11-20 19:02:46.356 Info, NONCES: 0x6e, 0x95, 0x52, 0xb2, 0x7c, 0x92, 0x79, 0xc0 2019-11-20 19:02:46.356 Info, Node003, Sending (Send) message (Callback ID=0x01, Expected Reply=0x00) - Nonce_Report - 0x01, 0x11, 0x00, 0x13, 0x03, 0x0a, 0x98, 0x80, 0x6e, 0x95, 0x52, 0xb2, 0x7c, 0x92, 0x79, 0xc0, 0x05, 0x01, 0xa4: 2019-11-20 19:02:46.367 Detail, Received: 0x01, 0x04, 0x01, 0x13, 0x01, 0xe8 2019-11-20 19:02:46.367 Detail, ZW_SEND_DATA delivered to Z-Wave stack 2019-11-20 19:02:46.503 Detail, Received: 0x01, 0x05, 0x00, 0x13, 0x01, 0x00, 0xe8 2019-11-20 19:02:46.503 Detail, ZW_SEND_DATA Request with callback ID 0x01 received (expected 0x01) 2019-11-20 19:02:46.595 Detail, Node003, Received: 0x01, 0x1f, 0x00, 0x04, 0x00, 0x03, 0x17, 0x98, 0x81, 0x6c, 0x18, 0x7d, 0x3e, 0x7e, 0xb2, 0xa0, 0xee, 0xb9, 0x9c, 0x19, 0x66, 0x6e, 0xa9, 0xdb, 0x77, 0xad, 0x87, 0xa9, 0xc0, 0x1c, 0xbc, 0x00, 0x8e 2019-11-20 19:02:46.595 Info, Raw: 0x98, 0x81, 0x6c, 0x18, 0x7d, 0x3e, 0x7e, 0xb2, 0xa0, 0xee, 0xb9, 0x9c, 0x19, 0x66, 0x6e, 0xa9, 0xdb, 0x77, 0xad, 0x87, 0xa9, 0xc0, 0x1c, 0xbc 2019-11-20 19:02:46.595 Detail, Node003, Decrypted Packet: 0x00, 0x80, 0x03, 0x64 2019-11-20 19:02:46.595 Detail, 2019-11-20 19:02:46.595 Info, Node003, Received Battery report from node 3: level=100 2019-11-20 19:02:46.595 Detail, Node003, Refreshed Value: old value=85, new value=100, type=byte 2019-11-20 19:02:46.595 Detail, Node003, Changes to this value are not verified 2019-11-20 19:02:46.595 Detail, Node003, Notification: ValueChanged

Hei, låsen har siste versjon gjennom ID Lock Updater appen. Z-wave FW har jeg enda ikke funnet tid eller mulighet til å oppgradere så det står høyt på planen. Jeg ser nå at den bare trengte litt "tid" for å rapportere nytt batterinivå. Så jeg får bare følge med videre. Edit: 95% nå! Takk for svar

Hei! Ja jeg mener det, både ved manuell bruk av vrider inne samt låsing fra display ute/knapp inne går den greit opp og igjen. Det er selvsagt vanskelig å vite uten å ha "prøvd" noen andres dør og kjenne hvordan den føles. En annen ting jeg stusser på er batterirapporteringen. Jeg byttet batteri igjen fordi motoren gikk veldig tregt og HA rapporterte 15% før jeg tok ut z-wave modulen. Samtidig med batteribyttet puttet jeg tilbake zwave modulen. Og den rapporterer nå bare 60% batteri rett etter byttet. 8 stk ferske fra Biltema denne gangen.

Hei, dere. Etter en lang stund med god batteritid på min ID Lock 150 opplever jeg plutselig at strømmen suges ut av den på no-time. Jeg har hatt noen endringer i oppsettet den siste tiden og det kan oppsummeres slik: - Overgang fra 0.99 til 0.101 - Tillegg av 2 stk z-dim. - Flyttet kontroller fra ene siden av huset til den andre. Nå står den nærmest låsen istedet for lengst unna. - Det ble kaldt ute Oppsettet mitt er som følger: Controller: UZB1 HA: 0.101.3 (Docker i ubuntu på NUC) Ingen polling på noen zwave-enheter Batterier byttet for 1 uke siden 8 stk AA fra Ikea (ferske) Z-wave FW på ID Lock fra den modulen ble lansert 2 x Roller Shutter 3, 1 x telldus strømplugg, 2x z-dim Jeg har prøvd å lese litt i OZW-loggen og det eneste "rare" jeg ser låsen rapporterer "ofte" i loggen er: Received DoorLock report: DoorLock is Unsecure/Secure7 I min debuggingsprosess kom jeg også over at HA rapporterer følgende: Capabilities: zwave_plus, frequent, beaming og *routing*. Stemmer dette for en batteridrevet enhet? Det jeg lurer på er om noen har noen opplevd noe lignende og evt. kan komme med tips og triks rundt debugging Har koblet ut z-wave modulen nå Med vennlig hilsen Marius Med vennlig hilsen Marius

Hei, jeg tror man kan sette parametere direkte med utviklerverktøyet. Jeg prøvde å stille inn øvre og nedre nivåer slik: